BS ISO 17447-1-2015 Road Vehicles Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs《道路车辆 带有锥形座椅的.pdf

1、BSI Standards PublicationBS ISO 17447-1:2015Road Vehicles Glow-plugswith conical seating and theircylinder head housingPart 1: Basic characteristics and dimensionsfor metal-sheath-type glow-plugsBS ISO 17447-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of IS

2、O 17447-1:2015.Together with BS ISO 17747-2:2015 and BS ISO 17747-3:2015,it supersedes BS AU 262-1:1995, BS AU 262-2:1995 and BS ISO7578:2008 which are withdrawn. Together with BS ISO 6550-3:2013,BS ISO 17747-2:2015 and BS ISO 17747-3:2015, it supersedes BS ISO6550-3:2009 which is withdrawn. Togethe

3、r with BS ISO 6550-4:2014,BS ISO 17747-2:2015 and BS ISO 17747-3:2015, it supersedes BS ISO6550-4:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/22, Engines for road vehicles.A list of organizations represented on this committee can beobtained

4、 on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 81750 2ICS 43.060.50Compliance with a Br

5、itish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2015.Amendments issued since publicationDate Text affectedBS ISO 17447-1:2015 ISO 2015Road Vehicles Glow-plugs with conical s

6、eating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugsVhicules routiers Bougies de prchauffage fourreau et sige conique et leur logement dans la culasse Partie 1: Caractristiques de base et dimensions des bougies de prchauffage fourreau d

7、e type mtalliqueINTERNATIONAL STANDARDISO17447-1First edition2015-05-15Reference numberISO 17447-1:2015(E)BS ISO 17447-1:2015ISO 17447-1:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of th

8、is publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in t

9、he country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 17447-1:2015ISO 17447-1:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions

10、. 14 Dimensions and tolerances . 24.1 Threads-dimension limits and tolerances . 24.2 Glow-plugs 34.2.1 General 34.2.2 Heating elements . 44.2.3 Electrical connection 44.2.4 Dimensions for M14, M12, M10, and M8 glow-plugs . 64.3 Cylinder head housing 74.3.1 General 74.3.2 Housing dimensions . 85 Inst

11、allation tightening torque 8Annex A (normative) Pin terminal dimensions .10Annex B (informative) M8 1 glow-plugs with 10 mm hexagon and their cylinder head housing 12Bibliography .13 ISO 2015 All rights reserved iiiContents PageBS ISO 17447-1:2015ISO 17447-1:2015(E)ForewordISO (the International Org

12、anization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been establi

13、shed has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardizatio

14、n.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with t

15、he editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any pate

16、nt rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For a

17、n explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword Supplementary information .The committee responsible for th

18、is document is ISO/TC 22, Road vehicles, Subcommittee SC 32, Electrical and electronic components and general system aspects.ISO 17447 consists of the following parts, under the general title Road Vehicles Glow-plugs with conical seating and their cylinder head housing: Part 1: Basic characteristics

19、 and dimensions for metal-sheath-type glow-plugs Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs Part 3: Tests and requirementsiv ISO 2015 All rights reservedBS ISO 17447-1:2015ISO 17447-1:2015(E)IntroductionThe purpose of this International Standard is to provide a c

20、ompact and concise specification on glow-plugs and their cylinder head housings, which is to replace the existing single standards on each type of glow-plugs.It is intended to specify the main properties, the design requirements, and the dimensions of most of the existing types of glow-plugs and the

21、ir cylinder head housings. It is to enable the user to work with one comprehensive document valid for most types of glow-plugs instead of a number of standards, each of them specified for one type only.This part of ISO 17447 covers basic characteristics and dimensions for metal-sheath-type glow-plug

22、s. ISO 17447-2 covers basic characteristics and dimensions for ceramic-sheath-type glow-plugs. Tests and requirements are defined in ISO 17447-3.It is intended to withdraw the following standards on glow-plugs and their cylinder head housing as soon as this part of ISO 17447 is published:ISO 6550-1,

23、 ISO 6550-2, ISO 6550-3, ISO 6550-4, ISO 7578. ISO 2015 All rights reserved vBS ISO 17447-1:2015BS ISO 17447-1:2015Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs1 ScopeThis part of ISO 17447

24、specifies the main properties and dimensions of metal-sheath-type glow-plugs, including the terminals and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines.2 Normative referencesThe following documents, in whole or in part, are normatively referenced

25、in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 68-1, ISO general purpose screw threads Basic profile Part 1: Metric screw th

26、readsISO 261, ISO general purpose metric screw threads General planISO 965-1:2013, ISO general purpose metric screw threads Tolerances Part 1: Principles and basic dataISO 965-3, ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threadsISO 1101, Geometri

27、cal product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out3 Terms and definitionsFor the purpose of this document, the following terms and definitions apply.3.1nominal voltagevoltage as marked on the housing of the glow-plugNote 1 to entry: The nom

28、inal voltage of the glow-plug is generally not identical to the supply voltage of the vehicles electrical system.3.2test voltagevoltage(s) applied to the glow-plug under testINTERNATIONAL STANDARD ISO 17447-1:2015(E) ISO 2015 All rights reserved 1BS ISO 17447-1:2015ISO 17447-1:2015(E)4 Dimensions an

29、d tolerances4.1 Threads-dimension limits and tolerancesThe threads of glow-plugs and the corresponding tapped holes in cylinder heads shall be in accordance with ISO 68-1, ISO 261, ISO 965-1, and ISO 965-3.The tolerance class 6g shall be used for glow-plug threads. For existing designs, tolerance cl

30、ass 6e is also permitted. New designs shall be to tolerance class 6g.The thread in the corresponding tapped holes in the cylinder heads shall have tolerance class 6H.The threads, dimension limits, and tolerances of glow-plugs and the corresponding tapped holes in the cylinder head are given in Table

31、s 1 and 2.Table 1 Dimension limitsDimensions in millimetresThread sizeTolerance classDimension Major diameter Pitch diameter Minor diametermax min max min max minM14 1,256ePlug thread (on finished plug)13,937 13,725 13,125 12,993 12,404 12,181a6HTapped hole in the cylinder headNot specified14,000 13

32、,368 13,188 12,912 12,647M12 1,256ePlug thread (on finished plug)11,937 11,725 11,125 10,993 10,404 10,181a6HTapped hole in the cylinder headNot specified12,000 11,368 11,188 10,912 10,647M10 1,256gPlug thread (on finished plug)9,972 9,760 9,160 9,042 8,439 8,251a6HTapped hole in the cylinder headNo

33、t specified10,000 9,348 9,188 8,912 8,647M10 16gPlug thread (on finished plug)9,974 9,794 9,324 9,212 8,747 8,563b6HTapped hole in the cylinder headNot specified10,000 9,500 9,350 9,153 8,917M8 16gPlug thread (on finished plug)7,974 7,794 7, 324 7, 212 6,747 6,596b6HTapped hole in the cylinder headN

34、ot specified8,000 7, 500 7, 350 7,153 6,917aWith a root radius 0,125 mm (0,1 P).bWith a root radius 0,1 mm (0,1 P).2 ISO 2015 All rights reservedBS ISO 17447-1:2015ISO 17447-1:2015(E)Table 2 Minor diameters and fundamental deviations for glow-plug threadsDimensions in millimetresThread size Minor di

35、ameterad3maxFundamental deviationbesM14 1,25 6e d3max= (12,647 0,063 0,180) = 12,404 0,063M12 1,25 6e d3max= (10,647 0,063 0,180) = 10,404 0,063M10 1,25 6g d3max= (8,647 0,028 0,180) = 8,439 0,028M10 1 6g d3max= (8,917 0,026 0,144) = 8,747 0,026M8 1 6g d3max= (6,917 0,026 0,144) = 6,747 0,026aThe ma

36、ximum value of the minor diameter, d3max, is calculated according to ISO 965-1:2013, Clause 11 with a truncation of H/6, in accordance with the following formula:d3max= D1 es 2(H/4 H/6)bThe fundamental deviation, es, between the pitch diameters of the thread and of the tapped hole is intended to pre

37、vent the possibility of seizure, as a result of combustion deposits on the bare threads, when removing the glow-plugs. This clearance is also intended to enable glow-plugs with threads in accordance with this part of ISO 17447 to be fitted in existing tapped holes.4.2 Glow-plugs4.2.1 GeneralSheath-t

38、ype glow-plug dimensions and tolerances shall be as given in Figure 1 and Tables 3 and 4.Type M14 should not be used for new applications.Dimensions in millimetresKeyaMajor diameter, in accordance with ISO 1101.bCylinder or hexagonal nut (only for threaded terminal).cInsulator.dM4, M5, or pin termin

39、al (for details, see 4.2.3).Figure 1 Glow-plugNOTE See Tables 3 and 4 for dimensions. ISO 2015 All rights reserved 3BS ISO 17447-1:2015ISO 17447-1:2015(E)4.2.2 Heating elementsFigures 2 and 3 show additional heating elements.NOTE For other dimensions, see Figure 1.Figure 2 With cone end diameterFigu

40、re 3 With reduced tip end diameter4.2.3 Electrical connectionFigure 4 to 8 show the pin and blade terminals P1 to P5.NOTE For details, see Annex A.Figure 4 Pin terminal: type P1NOTE For details, see Annex A.Figure 5 Pin terminal: type P24 ISO 2015 All rights reservedBS ISO 17447-1:2015ISO 17447-1:20

41、15(E)Key1 tab ISO 8092-1; for M14/M12, size 6,3 or 9,5; for M10, size 6,3Figure 6 Blade terminal: type P3Key1 pin ISO 8092-4, size 4Figure 7 Pin terminal: type P4NOTE For details, see Annex A.Figure 8 Pin terminal: type P5 ISO 2015 All rights reserved 5BS ISO 17447-1:2015ISO 17447-1:2015(E)4.2.4 Dim

42、ensions for M14, M12, M10, and M8 glow-plugsTable 3 M14 and M12Glow- plug typeElectrical connectionThread Hexagon Body Heating elementType l6l7d1l1s e k2d20,2d3reft1l21l31d400,2d500,2l41l5t2F1Type P330 12M14 1,25 6e1114 h13 15,54,0 6312 110,26 26 6,1-20to30-0,7F2Thread M525 7E1Thread M5M12 1,25 6e12

43、 h13 13,3 10 93or620or265,1or6,1E2Type P330 12E3Thread M525 75,1 4,1 6,5E4Type P330 12Table 4 M10 and M8Glow- plug typeElectrical connectionThread Hexagon Body Heating elementType l6l7d1l1s e k2d20,2d3reft1l2l3d40,2d50,3l4l5t2D1Thread M425 7M10 1,25 6g2212,0 h1313,3 4,0 123 7 0,210 to 20135 to 451-2

44、0 to 301- D2Type P1- - C1Type P3M10 1 6g9,6 h1410,7936,4 0,27,0 0,2520,00,2528,5 0,5- 0,7C2- - 9,1 0,2525,90,25-27,0 0,5C3Type P55 C4 7,0 0,2526,70,2528,5 0,5B1Thread M425 78,2 to 8,5- B2 4 5 0,4B3 10 7,0 3,6 B4Type P1, P2, P4- -M10 1 6g10,0 h1311 63 7 0,2 726 to 951-20 to 351- 0,7B5 45 0,4B6 3,6B74

45、- -0,7B8 3,3 5B94,4- -B10 3,5 56 ISO 2015 All rights reservedBS ISO 17447-1:2015ISO 17447-1:2015(E)Glow- plug typeElectrical connectionThread Hexagon Body Heating elementType l6l7d1l1s e k2d20,2d3reft1l2l3d40,2d50,3l4l5t2A1Thread M429,5 727 to 1020,54- - A2 3,3 5 A3 93 4,4- - A4M8 1 6g 108,0 h13 8,6

46、 7,5or6,7 6,0 0,4 103,5 5 0,7A5Type P1, P4- -123 4- - A6 3,3 5 A7 4,4- - A8 3,5 5 4.3 Cylinder head housing4.3.1 GeneralThe dimensions and tolerances of the cylinder head housing for sheath-type glow-plugs shall be as given in Figure 9, Table 5, and Table 6.Dimensions in millimetresKeyaPitch diamete

47、r, see Table 1.NOTE See Tables 5 and 6 for dimensions.Figure 9 Cylinder head housingTable 4 (continued) ISO 2015 All rights reserved 7BS ISO 17447-1:2015ISO 17447-1:2015(E)4.3.2 Housing dimensionsTable 5 Housing dimensions for M14 and M12Dimensions in millimetresM14 and M12 glow-plug typeD16H 1D2D3r

48、efD4aE L2L3F M14 1,25 -3 12,7 11,0 7,4a(l2-2) (l3-3)E M12 1,25 -3 10,7 9,0 7,4a(l2-2) (l3-3)aValue should be agreed between glow-plug manufacturers and engine manufacturers.NOTE , l2,and l3are dimensions of the glow-plug. See Figure 1, Table 3, and Table 4.Table 6 Housing dimensions for M10 and M8Dimensions in millimetresM10 and M8 glow-plug typeD16H 1D2D3refD4aE L2L3D M10 1,25 -3 8,7 7,0 6,5a(l2-2) (l3-3)C M10 1 -3 8,8 6,4 5,5a(l2-2) (l3-3)B M10 1 -3 8,8 7,0 6,5a(l2-2) (l3-3)A1 to A9 M8 1 -36,95 +0,16,0 5