BS ISO 17515-1-2015 Intelligent transport systems Communications access for land mobiles (CALM) Evolved Universal Terrestrial Radio Access Network (E-UTRAN) General usage《智能交通系统 陆地.pdf

1、BSI Standards PublicationBS ISO 17515-1:2015Intelligent transport systems Communications accessfor land mobiles (CALM) Evolved Universal TerrestrialRadio Access Network (E-UTRAN)Part 1: General usageBS ISO 17515-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation o

2、f ISO 17515-1:2015.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisi

3、ons of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 84206 1ICS 03.220.20; 35.240.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was p

4、ublished under the authority of theStandards Policy and Strategy Committee on 30 September 2015.Amendments issued since publicationDate Text affectedBS ISO 17515-1:2015 ISO 2015Intelligent transport systems Communications access for land mobiles (CALM) Evolved Universal Terrestrial Radio Access Netw

5、ork (E-UTRAN) Part 1: General usageSystmes intelligents de transport Accs aux communications des services mobiles terrestres (CALM) Rseau daccs la radio terrestre universelle volue (E-UTRAN) Partie 1: Dusage gnralINTERNATIONAL STANDARDISO17515-1First edition2015-09-01Reference numberISO 17515-1:2015

6、(E)BS ISO 17515-1:2015ISO 17515-1:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mecha

7、nical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, Swit

8、zerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 17515-1:2015ISO 17515-1:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Abbreviated terms 25 Adoption of other standards and internationally adopted practices 36 Communic

9、ation and management adaptation 36.1 Communication interface 36.2 Communication adaptation . 36.2.1 Communication adaptation layer 36.3 Management adaptation . 36.3.1 Management adaptation entity . 36.3.2 Mapping of E-UTRAN connection states to IS0 21218 CI states . 46.3.3 Connection and disconnecti

10、on procedure . 46.4 CI parameters . 56.4.1 General 56.4.2 E-UTRAN specific parameters 56.4.3 Communication profile parameters 57 Session establishment and termination procedures 6Annex A (informative) E-UTRAN initial access/default bearer establishment 7Bibliography .10 ISO 2015 All rights reserved

11、iiiContents PageBS ISO 17515-1:2015ISO 17515-1:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. E

12、ach member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internati

13、onal Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the differen

14、t types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall n

15、ot be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is i

16、nformation given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) se

17、e the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 204, Intelligent transport systems.ISO 17515 consists of the following parts, under the general title Intelligent transport systems Communications access for land mobiles (CALM) Evolved Uni

18、versal Terrestrial Radio Access Network (E-UTRAN): Part 1: General usageAdditional parts, dealing with direct communications and routing functionalities, are under preparation.iv ISO 2015 All rights reservedBS ISO 17515-1:2015ISO 17515-1:2015(E)IntroductionThis International Standard is a member of

19、the set of International Standards developed under the acronym “Communications Access for Land Mobiles” (CALM) that refers to ISO/TC 204 work items. An introduction to this set of International Standards is provided in ISO 21217.This part of ISO 17515 is part 1 of a multipart standard which determin

20、es usage of technology developed under the acronym E-UTRAN for usage as a communication interface in an ITS station unit.The term long-term evolution (LTE) is commonly used to refer to the set of standards containing the E-UTRAN technical specifications. In this part of ISO 17515, the term “E-UTRAN”

21、 is used to refer to these specifications and can be treated as a synonym for “LTE”. ISO 2015 All rights reserved vBS ISO 17515-1:2015BS ISO 17515-1:2015Intelligent transport systems Communications access for land mobiles (CALM) Evolved Universal Terrestrial Radio Access Network (E-UTRAN) Part 1: Ge

22、neral usage1 ScopeThis part of ISO 17515 enables usage of the E-UTRAN cellular network technology as an ITS access technology in an ITS station by specifying details of the “Communication Adaptation Layer” (CAL) and the “Management Adaptation Entity” (MAE) of communication interfaces specified in IS

23、O 21218, and session management by reference to ISO 25111.Wherever practicable, this part of ISO 17515 has been developed by reference to suitable extant standards, adopted by selection.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document an

24、d are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 21217:2014, Intelligent transport systems Communications access for land mobiles (CALM) Architec

25、tureISO 21218:2013, Intelligent transport systems Communications access for land mobiles (CALM) Access technology supportISO 24102-3:2013, Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 3: Service access pointsISO 25111:2009, Intelligent trans

26、port systems Communications access for land mobiles (CALM) General requirements for using public networks3GPP TS 36.331, Technical Specification Group Radio Access Network; Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specification (Release 10)ETSI/TS 1

27、02 760-1, Intelligent Transport Systems (ITS); Communications Access for Land Mobiles (CALM); Test specifications for Access Technology Support (ISO 21218); Part 1: Implementation Conformance Statement (ICS) proforma3 Terms and definitionsFor the purposes of this document, the following terms and de

28、finitions apply.3.1I-Parameterparameter of a CISOURCE: ISO 21218INTERNATIONAL STANDARD ISO 17515-1:2015(E) ISO 2015 All rights reserved 1BS ISO 17515-1:2015ISO 17515-1:2015(E)3.2Link-IDidentifier of a link given by the address of a VCISOURCE: ISO 212183.3MI-COMMANDcommand issued by the ITS-S managem

29、ent entity and sent to the ITS-S access layer via the MI-SAPSOURCE: ISO 24102-33.4MI-REQUESTcommand issued by the ITS-S access layer and sent to the ITS-S management entity via the MI-SAPSOURCE: ISO 24102-34 Abbreviated termsFor the purposes of this document, the following abbreviated terms apply.3G

30、PP 3rd Generation Partnership ProjectCAL Communication Adaptation Layer(see ISO 21217)CI Communication Interface(see ISO 21217)E-UTRAN Evolved Universal Terrestrial Radio Access NetworkIN-SAP Communication SAP as offered by the CAL to the ITS-S networking and transport layer(see ISO 21218)ITS-S ITS

31、Station(see ISO 21217)LTE Long Term EvolutionMAE Management Adaptation Entity(see ISO 21217)MI-SAP Management SAP as offered by the ITS-S management towards the MAE(see ISO 21218)UC-VCI VCI for reception from and transmission to a unicast MAC address(see ISO 21218)UE User Equipment2 ISO 2015 All rig

32、hts reservedBS ISO 17515-1:2015ISO 17515-1:2015(E)5 Adoption of other standards and internationally adopted practicesEquipment and systems complying with this part of ISO 17515 shall operate in the environment of, and to the parameters defined in the following International Standards: ISO 21217:2014

33、, Intelligent transport systems Communications access for land mobiles (CALM) Architecture; ISO 21218:2013, Intelligent transport systems Communications access for land mobiles (CALM) Access technology support; ISO 24102-3:2013, Intelligent transport systems Communications access for land mobiles (C

34、ALM) ITS station management Part 3: Service access points; ISO 25111:2009, Intelligent transport systems Communications access for land mobiles (CALM) General requirements for using public networks; 3GPP TS 36.331, Long-Term Evolution of the 3GPP Radio Technology, 3GPP Release 10, and shall operate

35、within the limits and parameters defined in regional and national regulations.6 Communication and management adaptation6.1 Communication interfaceThe concept of a communication interface (CI) is introduced in ISO 21217 as part of the ITS station reference architecture. Interfaces, management, behavi

36、our, and parameters of CIs are specified in ISO 21218, especially the adaptation of a CI access technology to the communication service access point IN-SAP, and to the management service access point MI-SAP, with reference to ISO 24102-3.Such adaptation enables a common definition of IN-SAP and MI-S

37、AP service primitives for all kinds of access technologies. Details of this adaptation functionality dedicated to the access technology E-UTRAN are specified in 6.2 and 6.3.6.2 Communication adaptation6.2.1 Communication adaptation layerThe “Communication Adaptation Layer” (CAL) specified in ISO 212

38、18 provides the IN-SAP towards the ITS-S networking and transport layer.An E-UTRAN implementation according to this International Standard shall support UC-VCIs and the related procedures specified in ISO 21218. The Link-ID shall be constructed as specified in ISO 21218:2013, 6.3 and C.3.6.3 Managem

39、ent adaptation6.3.1 Management adaptation entityThe “Management Adaptation Entity” (MAE) specified in ISO 21218 provides the MI-SAP towards the ITS-S management entity described in ISO 21217. The MI-SAP services, service primitives and service primitive functions are specified in ISO 24102-3.The MI-

40、COMMANDs presented in Table 1 shall be supported: ISO 2015 All rights reserved 3BS ISO 17515-1:2015ISO 17515-1:2015(E)Table 1 MI-COMMANDsUser Equipment (UE) radio transmission and reception “Long-Term Evolution of the 3GPP Radio technology, 3GPP Release 10”2 3GPP TS 36.300, LTE; Evolved Universal Te

41、rrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 23 3GPP TS 21.905, Technical Specification Group Services and System Aspects; Vocabulary for 3GPP Specifications (Release 10)10 ISO 2015 All rights reservedBS ISO 17515-1:2015

42、BS ISO 17515-1:2015ISO 17515-1:2015(E) ISO 2015 All rights reservedICS 35.240.60; 03.220.20Price based on 10 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporat

43、ed by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others

44、to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help t

45、hem achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF v

46、ersions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Custom

47、er Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international st

48、andards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Membe

49、r. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. L