BS ISO 17612-2007 Tractors and machinery for agriculture and forestry - Auxiliary-power-transmission connector for the operator station《农业和林业用拖拉机和机械 操作台用辅助动力传输连接器》.pdf

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58forestry Auxiliary-power-transmission connector for the operator stationICS 65.060.10Tractors and m

2、achinery for agriculture and BRITISH STANDARDBS ISO 17612:2004BS ISO 17612:2004This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 March 2007 BSI 2007ISBN 978 0 580 50435 8Amendments issued since publicationAmd. No. Date Commentscontract. User

3、s are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations. National forewordThis British Standard was published by BSI. It is the UK implementation of ISO 17612:2004.The UK participation in its preparation was entrusted to Technica

4、l Committee AGE/6, Agricultural tractors and forestry machinery.A list of organizations represented on AGE/6 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a INTERNATIONALSTANDARDISO17612First edition2004-02-15Reference number

5、ISO 17612:2004(E)Tractors and machinery for agriculture and forestry Auxiliary-power-transmission connector for the operator stationTracteurs et matriels agricoles et forestiers Connecteur de transmission dnergie auxiliaire au poste de loprateurBS ISO 17612:2004iiiiiForewordISO (the International Or

6、ganization for Standardization) is a worldwide federation of national standards bodies(ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for which a technical committee has beenestablish

7、ed has the right to be represented on that committee. International organizations, governmental andnon-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the InternationalElectrotechnical Commission (IEC) on all matters of electrotechnical standardization.In

8、ternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standardsadopted by the technical committees are circulated to the member bodies for voting. Publica

9、tion as anInternational Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. ISO shall not be held responsible for identifying any or all such patent rights

10、.ISO 17612 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture andforestry, Subcommittee SC 4, Tractors.BS ISO 17612:2004ivIntroductionThis International Standard specifies an electrical connector for the transmission of auxiliary power within theoperator station of

11、 enclosed agricultural machines. The specification thus established will allow manufacturersto provide both individual and multiple outlets in the cab. Typical applications include monitors, light-dutycontrollers, remote operating devices and miscellaneous off-the-shelf items. Only the application d

12、imensionsand electrical characteristics are covered.Other electrical transmission connectors for agricultural tractors and machinery are specified in ISO/TR 12369.For this and other International Standards dealing with connectors for electrical power transmission from tractorto implement or other me

13、ans, see the Bibliography.BS ISO 17612:20041Tractors and machinery for agriculture and forestry Auxiliary-power-transmission connector for the operator station1ScopeThis International Standard specifies the essential interface dimensions of a connector and its plug for thetransmission of electrical

14、power within the enclosed operator station of agricultural tractors and machinery.The device is intended to be used as a non-environmentally sealed, convenient source for power auxiliarydevices, providing a means for the operator to obtain electrical power without altering the tractor/machineelectri

15、cal wiring harness. The maximum current capacity of the specified device is : it is not applicable toany other voltage system ( or ).2 Normative referencesThe following referenced documents are indispensable for the application of this document. For datedreferences, only the edition cited applies. F

16、or undated references, the latest edition of the referenced document(including any amendments) applies.ISO 2768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individualtolerance indications3 Terms and definitionsFor the purposes of this document, the following te

17、rms and definitions apply.3.1 contactcurrent-carrying element of the connector, either male or female3.2 pinmale contact3.3 contact socketfemale contact3.4 power strip socketfemale half of the connector, integral to the power strip3.5 power strip plugmale half of the connector, attached to the devic

18、e to be powered3.6 connectorcomplete mated assembly containing socket, plug, pins and contact sockets12 V30 A6 V 24 VBS ISO 17612:200423.7 power stripconnector containing one or more distribution positions3.8 switched currentelectrical current path containing a switching component between battery an

19、d power strip3.9 un-switched currentelectrical current path having an uninterrupted current path between battery and power strip3.10 auxiliary devicedevice attached to the power strip plugEXAMPLE Monitor, controller, communication device, computer.4 Requirements4.1 Dimensional requirements4.1.1 Powe

20、r strip socketThe connector shall consist of a base containing one or more sockets.Each socket shall be covered with a lid, which shall be spring-loaded to close or have a detent to hold it in theclosed position. The lid shall have symbols defining the contact positions and their respective use.A ty

21、pical example is shown in Figure 1, for reference purposes only.The socket and pin spacing dimensions shall be in accordance with Figure 2.Female contacts shall be of at least a tin-plated material designed to mate with the male contacts specified inFigure 3.4.1.2 Power strip plugCritical outside di

22、mensions of the power strip plug shall be in accordance with Figure 4 to allow typical matingwith the power strip socket.BS ISO 17612:20043Dimensions in millimetresFigure 1 Typical power strip socket (for information only)BS ISO 17612:20044Dimensions in millimetres,tolerances in accordance with ISO

23、2768-mFigure 2 Socket and pin spacing dimensionsDimensions in millimetres,tolerances in accordance with ISO 2768-mFigure 3 Male contacts of power strip plugBS ISO 17612:20045Dimensions in millimetres,tolerances in accordance with ISO 2768-mFigure 4 Power strip plugBS ISO 17612:200464.2 Electrical re

24、quirements4.2.1 VoltageThere shall be a nominal voltage of d.c. at Contacts A and C, with reference to Contact B, at the vehiclerated engine speed. See Table 1.4.2.2 CurrentThe “sum” of the switched and unswitched current at any one connector (socket) shall be specified to be amaximum of . Total cur

25、rent draw of a multiple connector power strip shall not exceed .4.2.3 Contact electrical requirementsCircuit protections of Contacts A and C shall be provided based on the maximum current capacity of theelectrical circuit (sourced from an electrical distribution centre) and shall not exceed .Contact

26、 B shall have a dedicated electrical path direct to a convenient termination point near, or at, the frameground point of the battery.4.2.4 Contact layout and functionThe layout of the contacts shall be as shown in Figures 2, 3 and 4.Contacts shall have contact designation, symbol and function in acc

27、ordance with Table 1.Table 1 Contact designation, function and symbolContact designation Function SymbolContact A Unswitched d.c. AContact B Negative battery reference (Ground) BContact C Switched d.c. C+12 V30 A 30 A30 A+12 V+12 VBS ISO 17612:20047Bibliography1 ISO 1724, Road vehicles Connectors fo

28、r the electrical connection of towing and towed vehicles 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage2 ISO 8092-2, Road vehicles Connections for on-board electrical wiring harnesses Part 2: Definitions,test methods and general performance requirements3 ISO 8935,

29、Tractors for agriculture and forestry Mountings and apertures for external equipmentcontrols4 ISO/TR 12369, Agricultural tractors and machinery Electrical power transmission connectorsBS ISO 17612:2004BS ISO BSI389 Chiswick High RoadLondonW4 4AL17612:2004BSI British Standards InstitutionBSI is the i

30、ndependent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that t

31、hey possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the

32、identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, interna

33、tional and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply

34、 the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI e

35、lectronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantia

36、l discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at h

37、ttp:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Pa

38、tents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessar

39、y details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.