BS ISO 18442-2016 Space data and information transfer systems Space link extension Application program interface for return all frames service《空间数据和信息传输系统 空间链路扩展 全部回程帧业务的应用程序接口》.pdf

1、BS ISO 18442:2016Space data and informationtransfer systems Spacelink extension Applicationprogram interface for return allframes serviceBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 18442:2016 BRITISH STANDARDNational forewordThis British Standard is the UK

2、 implementation of ISO 18442:2016. It supersedes BS ISO 18442:2013 which is withdrawn. The UK participation in its preparation was entrusted to TechnicalCommittee ACE/68, Space systems and operations.A list of organizations represented on this committee can beobtained on request to its secretary.Thi

3、s publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 93380 6ICS 49.140Compliance with a British Standard cannot confer immun

4、ity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2016.Amendments/Corrigenda issued since publicationDate Text affectedBS ISO 18442:2016Reference number ISO 18442:2016(E) ISO 2016INTERNATIONAL STANDARDISO 18

5、442Space data and information transfer systems Space link extension Application program interface for return all frames service Systmes de transfert des informations et donnes spatiales Extension de liaisons spatiales Interface du programme dapplication pour service de retour par tout rseau Second e

6、dition 2016-11-15BS ISO 18442:2016ISO 18442:2016(E) COPYRIGHT PROTECTED DOCUMENT ISO 2016 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

7、the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. + 41 22 749 01 11 Fax + 41 22

8、 749 09 47 copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2016 All rights reservedBS ISO 18442:2016ISO 18442:2016(E) ISO 2016 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member

9、bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental

10、and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are

11、 described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives Attention is drawn t

12、o the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the

13、ISO list of patent declarations received. www.iso.org/patents Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as we

14、ll as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information ISO 18442 was prepared by the Consultative Committee for Space Data Systems (CCSDS) (as CCSDS 915.1-M-2, September 2015) and was adopted (

15、without modifications except those stated in clause 2 of this International Standard) by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 13, Space data and information transfer systems. This second edition cancels and replaces the first edition (ISO 18442:2013), which has

16、 been technically revised. BS ISO 18442:2016CCSDS RECOMMENDED PRACTICE: API FOR THE SLE RAF SERVICE CCSDS 915.1-M-2 Page i September 2015 AUTHORITY Issue: Recommended Practice, Issue 2 Date: September 2015 Location: Washington, DC, USA This document has been approved for publication by the Managemen

17、t Council of the Consultative Committee for Space Data Systems (CCSDS) and represents the consensus technical agreement of the participating CCSDS Member Agencies. The procedure for review and authorization of CCSDS documents is detailed in Organization and Processes for the Consultative Committee f

18、or Space Data Systems (CCSDS A02.1-Y-4), and the record of Agency participation in the authorization of this document can be obtained from the CCSDS Secretariat at the e-mail address below. This document is published and maintained by: CCSDS Secretariat National Aeronautics and Space Administration

19、Washington, DC, USA E-mail: secretariatmailman.ccsds.orgISO 18442:2016(E) ISO 2016 All rights reservedBS ISO 18442:2016CCSDS RECOMMENDED PRACTICE: API FOR THE SLE RAF SERVICE CCSDS 915.1-M-2 Page ii September 2015 STATEMENT OF INTENT The Consultative Committee for Space Data Systems (CCSDS) is an or

20、ganization officially established by the management of its members. The Committee meets periodically to address data systems problems that are common to all participants, and to formulate sound technical solutions to these problems. Inasmuch as participation in the CCSDS is completely voluntary, the

21、 results of Committee actions are termed Recommendations and are not in themselves considered binding on any Agency. CCSDS Recommendations take two forms: Recommended Standards that are prescriptive and are the formal vehicles by which CCSDS Agencies create the standards that specify how elements of

22、 their space mission support infrastructure shall operate and interoperate with others; and Recommended Practices that are more descriptive in nature and are intended to provide general guidance about how to approach a particular problem associated with space mission support. This Recommended Practi

23、ce is issued by, and represents the consensus of, the CCSDS members. Endorsement of this Recommended Practice is entirely voluntary and does not imply a commitment by any Agency or organization to implement its recommendations in a prescriptive sense. No later than five years from its date of issuan

24、ce, this Recommended Practice will be reviewed by the CCSDS to determine whether it should: (1) remain in effect without change; (2) be changed to reflect the impact of new technologies, new requirements, or new directions; or (3) be retired or canceled. In those instances when a new version of a Re

25、commended Practice is issued, existing CCSDS-related member Practices and implementations are not negated or deemed to be non-CCSDS compatible. It is the responsibility of each member to determine when such Practices or implementations are to be modified. Each member is, however, strongly encouraged

26、 to direct planning for its new Practices and implementations towards the later version of the Recommended Practice. ISO 18442:2016(E) ISO 2016 All rights reservedBS ISO 18442:2016CCSDS RECOMMENDED PRACTICE: API FOR THE SLE RAF SERVICE CCSDS 915.1-M-2 Page iii September 2015 FOREWORD This document i

27、s a technical Recommended Practice for use in developing ground systems for space missions and has been prepared by the Consultative Committee for Space Data Systems (CCSDS). The Application Program Interface described herein is intended for missions that are cross-supported between Agencies of the

28、CCSDS. This Recommended Practice specifies service type-specific extensions of the Space Link Extension Application Program Interface for Transfer Services specified by CCSDS (reference 3). It allows implementing organizations within each Agency to proceed with the development of compatible, derived

29、 Standards for the ground systems that are within their cognizance. Derived Agency Standards may implement only a subset of the optional features allowed by the Recommended Practice and may incorporate features not addressed by the Recommended Practice. Attention is drawn to the possibility that som

30、e of the elements of this document may be the subject of patent rights. CCSDS has processes for identifying patent issues and for securing from the patent holder agreement that all licensing policies are reasonable and non-discriminatory. However, CCSDS does not have a patent law staff, and CCSDS sh

31、all not be held responsible for identifying any or all such patent rights. Through the process of normal evolution, it is expected that expansion, deletion, or modification of this document may occur. This Recommended Standard is therefore subject to CCSDS document management and change control proc

32、edures, which are defined in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-4). Current versions of CCSDS documents are maintained at the CCSDS Web site: http:/www.ccsds.org/ Questions relating to the contents or status of this document should be sent

33、 to the CCSDS Secretariat at the e-mail address indicated on page i. ISO 18442:2016(E) ISO 2016 All rights reservedBS ISO 18442:2016CCSDS RECOMMENDED PRACTICE: API FOR THE SLE RAF SERVICE CCSDS 915.1-M-2 Page iv September 2015 At time of publication, the active Member and Observer Agencies of the CC

34、SDS were: Member Agencies Agenzia Spaziale Italiana (ASI)/Italy. Canadian Space Agency (CSA)/Canada. Centre National dEtudes Spatiales (CNES)/France. China National Space Administration (CNSA)/Peoples Republic of China. Deutsches Zentrum fr Luft- und Raumfahrt (DLR)/Germany. European Space Agency (E

35、SA)/Europe. Federal Space Agency (FSA)/Russian Federation. Instituto Nacional de Pesquisas Espaciais (INPE)/Brazil. Japan Aerospace Exploration Agency (JAXA)/Japan. National Aeronautics and Space Administration (NASA)/USA. UK Space Agency/United Kingdom. Observer Agencies Austrian Space Agency (ASA)

36、/Austria. Belgian Federal Science Policy Office (BFSPO)/Belgium. Central Research Institute of Machine Building (TsNIIMash)/Russian Federation. China Satellite Launch and Tracking Control General, Beijing Institute of Tracking and Telecommunications Technology (CLTC/BITTT)/China. Chinese Academy of

37、Sciences (CAS)/China. Chinese Academy of Space Technology (CAST)/China. Commonwealth Scientific and Industrial Research Organization (CSIRO)/Australia. Danish National Space Center (DNSC)/Denmark. Departamento de Cincia e Tecnologia Aeroespacial (DCTA)/Brazil. Electronics and Telecommunications Rese

38、arch Institute (ETRI)/Korea. European Organization for the Exploitation of Meteorological Satellites (EUMETSAT)/Europe. European Telecommunications Satellite Organization (EUTELSAT)/Europe. Geo-Informatics and Space Technology Development Agency (GISTDA)/Thailand. Hellenic National Space Committee (

39、HNSC)/Greece. Indian Space Research Organization (ISRO)/India. Institute of Space Research (IKI)/Russian Federation. KFKI Research Institute for Particle differentiates applicability by SLE service specification version; updates references. NOTE Substantive changes from the previous issue are marked

40、 with change bars in the inside margin. ISO 18442:2016(E) ISO 2016 All rights reservedBS ISO 18442:2016CCSDS RECOMMENDED PRACTICE: API FOR THE SLE RAF SERVICE CCSDS 915.1-M-2 Page vi September 2015 CONTENTS Section Page 1 INTRODUCTION 1-1 1.1 PURPOSE . 1-1 1.2 SCOPE 1-1 1.3 APPLICABILITY . 1-2 1.4 R

41、ATIONALE 1-2 1.5 DOCUMENT STRUCTURE . 1-3 1.6 DEFINITIONS, NOMENCLATURE, AND CONVENTIONS . 1-5 1.7 REFERENCES . 1-8 2 OVERVIEW . 2-1 2.1 INTRODUCTION 2-1 2.2 PACKAGE RAF SERVICE INSTANCES 2-1 2.3 PACKAGE RAF OPERATIONS . 2-5 2.4 SECURITY ASPECTS OF THE SLE RAF TRANSFER SERVICE 2-8 3 RAF SPECIFIC SPE

42、CIFICATIONS FOR API COMPONENTS 3-1 3.1 API SERVICE ELEMENT . 3-1 3.2 SLE OPERATIONS 3-6 3.3 SLE APPLICATION 3-7 3.4 SEQUENCE OF DIAGNOSTIC CODES 3-7 ANNEX A RAF SPECIFIC INTERFACES (NORMATIVE) . A-1 ANNEX B ACRONYMS (INFORMATIVE) .B-1 ANNEX C INFORMATIVE REFERENCES (INFORMATIVE) C-1 Figure 1-1 SLE S

43、ervices and SLE API Documentation . 1-4 2-1 RAF Service Instances 2-2 2-2 RAF Operation Object Interfaces . 2-7 Table 2-1 RAF Configuration Parameters. 2-4 2-2 RAF Status Information 2-5 2-3 Mapping of RAF Operations to Operation Object Interfaces . 2-6 ISO 18442:2016(E) ISO 2016 All rights reserved

44、BS ISO 18442:2016CCSDS RECOMMENDED PRACTICE: API FOR THE SLE RAF SERVICE CCSDS 915.1-M-2 Page 1-1 September 2015 1 INTRODUCTION 1.1 PURPOSE The Recommended Practice Space Link ExtensionApplication Program Interface for Transfer ServicesCore Specification (reference 3) specifies a C+ API for CCSDS Sp

45、ace Link Extension Transfer Services. The API is intended for use by application programs implementing SLE transfer services. Reference 3 defines the architecture of the API and the functionality on a generic level, which is independent of specific SLE services and communication technologies. It is

46、thus necessary to add service type-specific specifications in supplemental Recommended Practices. The purpose of this document is to specify extensions to the API needed for support of the Return All Frames (RAF) service defined in reference 2. 1.2 SCOPE This Recommended Practice defines extensions

47、to the SLE API in terms of: a) the RAF-specific functionality provided by API components; b) the RAF-specific interfaces provided by API components; and c) the externally visible behavior associated with the RAF interfaces exported by the components. It does not specify a) individual implementations

48、 or products; b) the internal design of the components; and c) the technology used for communications. This Recommended Practice defines only interfaces and behavior that must be provided by implementations supporting the Return All Frames service in addition to the specification in reference 3. ISO

49、 18442:2016(E) ISO 2016 All rights reservedBS ISO 18442:2016CCSDS RECOMMENDED PRACTICE: API FOR THE SLE RAF SERVICE CCSDS 915.1-M-2 Page 1-2 September 2015 1.3 APPLICABILITY The Application Program Interface specified in this document supports three versions of the Return All Frames service, namely: a) Generation 1 identified by the version number 1 in the BIND operation, as specified by reference C2; b) Generation 2 identified by the version number 2 in the