BS ISO 18805-2017 Tyre classification Agricultural forestry and construction machines《轮胎分类 农业、林业和建筑机械》.pdf

1、Tyre classification Agricultural, forestry and construction machinesBS ISO 18805:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of ISO 18805:2017.The UK participation in its preparation was entruste

2、d to Technical Committee AUE/4, Tyres and wheels for motor vehicles.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applica

3、tion. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 84217 7ICS 83.160.30Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Commit

4、tee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 18805:2017 ISO 2017Tyre classification Agricultural, forestry and construction machinesClassification des pneumatiques Machines agricoles, engins forestiers et engins de constructionINTERNAT

5、IONAL STANDARDISO18805First edition2017-09-15Reference numberISO 18805:2017(E)BS ISO 18805:2017ISO 18805:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced

6、 or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO

7、copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 18805:2017ISO 18805:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Tyre classification and tyre nomenclature . 1

8、 ISO 2017 All rights reserved iiiContents PageBS ISO 18805:2017ISO 18805:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through I

9、SO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates

10、closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criter

11、ia needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of p

12、atent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name us

13、ed in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the

14、 World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 31, Tyres, rims and valves, Subcommittee SC 5, Agricultural tyres and rims.iv ISO 2017 All rights reserved

15、BS ISO 18805:2017Tyre classification Agricultural, forestry and construction machines1 ScopeThis document specifies the classification codes for agricultural and forestry tractors and machines.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of

16、 their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4223-1, Definitions of some terms used in the tyre industry Part 1: Pneumatic t

17、yres3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 42231 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platfor

18、m: available at http:/www.iso.org/obp 4 Tyre classification and tyre nomenclatureDefinitions of tyres depending on their purpose are given in Table 1.Nomenclature and classification code markings are given in Table 2.The classification code is not part of the size marking and its use is optional. Wh

19、en used, the code shall be clearly separated from the size marking on the tyres.Table 1 Definition of tyres depending on their purposeTractor-drive wheel tyreA tyre designed to be fitted to driven axles of agricultural and forestry tractors suitable for sustained high torque service.Tractor-steering

20、 wheel tyreA tyre designed to be fitted to nondriven axles of agricultural and forestry tractors.Implement tyreA tyre designed primarily for agricultural machines or implements or for agri-cultural trailers that is not suitable for sustained high torque service.Traction tyreA tyre designed primarily

21、 for the equipment of driven (trailed) axles of imple-ments or agricultural machinery, excluding sustained high torque services.Trailer tyreA tyre designed for the equipment of non-driven (trailed) axles of implements agricultural machinery or trailers.Logging and forestry service tyreSpecial design

22、 agricultural tyre suitable for forestry application.High flotation tyresA class of tyres designed with larger volume that may provide lower surface contact pressure than tyres with similar overall diameters typically with a three-part size designation.(Nominal overall diameter Nominal section width

23、 Rim diameter code)INTERNATIONAL STANDARD ISO 18805:2017(E) ISO 2017 All rights reserved 1BS ISO 18805:2017ISO 18805:2017(E)Table 2 Tyre classification code and tyre nomenclatureClassification code Tyre nomenclatureR Agricultural tractor drive wheel tyresR-1R-1WR-1SR-2R-3R-4Regular service (tread)We

24、t traction serviceSprayer/spreader serviceCane and rice service (deep tread)Flotation service (shallow tread)Industrial service (construction application)F Agricultural tractor steering wheel tyres (non-traction pattern)F-1F-2F-3Agricultural single rib treadAgricultural multiple rib treadIndustrial

25、service (construction application)I Agricultural implement tyresI-1I-2I-3I-4I-5I-6Multi-rib treadModerate traction serviceTraction treadPlow tail wheel serviceSteering serviceSmooth treadG Garden tractor tyres (implement tyres)G-1G-2G-3Regular traction serviceTurf traction serviceMaximum flotation s

26、erviceLS Logging and forestry service tyresLS-1LS-2LS-3LS-4Regular treadIntermediate treadDeep treadShallow treadHF High flotation tyresHF-1HF-2HF-3HF-4Shallow treadRegular treadDeep treadExtra deep tread2 ISO 2017 All rights reservedBS ISO 18805:2017This page deliberately left blankBSI is the natio

27、nal body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe brin

28、g together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process.

29、Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Serv

30、ices team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Sta

31、ndards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (

32、such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commerciall

33、y exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or interna

34、l company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A Br

35、itish Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an inte

36、rnal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier

37、 for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can

38、keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the late

39、st hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as man

40、y users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and se

41、rvices to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20