1、BSI Standards PublicationBS ISO 20216:2015Space data and information transfer systems Spacecraft onboard interface services Device data pooling serviceBS ISO 20216:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 20216:2015.The UK participation in its prepa
2、ration was entrusted to Technical Committee ACE/68, Space systems and operations.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its co
3、rrect application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 87915 9 ICS 49.140 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Str
4、ategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBS ISO 20216:2015 ISO 2015Space data and information transfer systems Spacecraft onboard interface services Device data pooling serviceSystmes de transfert des informations et donnes spatiales Service
5、s dinterfaces bord des vhicules spatiaux Service de groupage des donnes des priphriquesINTERNATIONAL STANDARDISO20216First edition2015-08-15Reference numberISO 20216:2015(E)BS ISO 20216:2015 ISO 2015Space data and information transfer systems Spacecraft onboard interface services Device data pooling
6、 serviceSystmes de transfert des informations et donnes spatiales Services dinterfaces bord des vhicules spatiaux Service de groupage des donnes des priphriquesINTERNATIONAL STANDARDISO20216First edition2015-08-15Reference numberISO 20216:2015(E)BS ISO 20216:2015ISO 20216:2015(E)ii ISO 2015 All righ
7、ts reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or
8、an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.
9、orgwww.iso.orgBS ISO 20216:2015ISO 20216:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic o
10、r mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Genev
11、a, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 20216:2015ISO 20216:2015(E) ISO 2015 All rights reserved iiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work o
12、f preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmenta
13、l, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main
14、 task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Atte
15、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 20216 was prepared by the Consultative Committee for Space Data Systems (CCSDS) (as CCSDS 871.1-M-1,
16、November 2012) and was adopted (without modifications except those stated in clause 2 of this International Standard) by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 13, Space data and information transfer systems.BS ISO 20216:2015BS ISO 20216:2015Recommendation for Sp
17、ace Data System Practices SPACECRAFT ONBOARD INTERFACE SERVICESDEVICE DATA POOLING SERVICERECOMMENDED PRACTICE CCSDS 871.1-M-1 MAGENTA BOOK November 2012 BS ISO 20216:2015Recommendation for Space Data System Practices SPACECRAFT ONBOARD INTERFACE SERVICESDEVICE DATA POOLING SERVICERECOMMENDED PRACTI
18、CE CCSDS 871.1-M-1 MAGENTA BOOK November 2012 BS ISO 20216:2015CCSDS RECOMMENDED PRACTICE FOR SOIS DEVICE DATA POOLING SERVICE CCSDS 871.1-M-1 Page i November 2012 AUTHORITYIssue: Recommended Practice, Issue 1 Date: November 2012 Location: Washington, DC, USA This document has been approved for publ
19、ication by the Management Council of the Consultative Committee for Space Data Systems (CCSDS) and represents the consensus technical agreement of the participating CCSDS Member Agencies. The procedure for review and authorization of CCSDS documents is detailed in Organization and Processes for the
20、Consultative Committee for Space Data Systems (CCSDS A02.1-Y-3), and the record of Agency participation in the authorization of this document can be obtained from the CCSDS Secretariat at the address below. This document is published and maintained by: CCSDS Secretariat Space Communications and Navi
21、gation Office, 7L70 Space Operations Mission Directorate NASA Headquarters Washington, DC 20546-0001, USA ISO 20216:2015(E) ISO 2015 All rights reservedBS ISO 20216:2015CCSDS RECOMMENDED PRACTICE FOR SOIS DEVICE DATA POOLING SERVICE CCSDS 871.1-M-1 Page ii November 2012 STATEMENT OF INTENT The Consu
22、ltative Committee for Space Data Systems (CCSDS) is an organization officially established by the management of its members. The Committee meets periodically to address data systems problems that are common to all participants, and to formulate sound technical solutions to these problems. Inasmuch a
23、s participation in the CCSDS is completely voluntary, the results of Committee actions are termed Recommendations and are not in themselves considered binding on any Agency. CCSDS Recommendations take two forms: Recommended Standards that are prescriptive and are the formal vehicles by which CCSDS A
24、gencies create the standards that specify how elements of their space mission support infrastructure shall operate and interoperate with others; and Recommended Practices that are more descriptive in nature and are intended to provide general guidance about how to approach a particular problem assoc
25、iated with space mission support. This Recommended Practice is issued by, and represents the consensus of, the CCSDS members. Endorsement of this Recommended Practice is entirely voluntary and does not imply a commitment by any Agency or organization to implement its recommendations in a prescriptiv
26、e sense. No later than five years from its date of issuance, this Recommended Practice will be reviewed by the CCSDS to determine whether it should: (1) remain in effect without change; (2) be changed to reflect the impact of new technologies, new requirements, or new directions; or (3) be retired o
27、r canceled. In those instances when a new version of a Recommended Practice is issued, existing CCSDS-related member Practices and implementations are not negated or deemed to be non-CCSDS compatible. It is the responsibility of each member to determine when such Practices or implementations are to
28、be modified. Each member is, however, strongly encouraged to direct planning for its new Practices and implementations towards the later version of the Recommended Practice. ISO 20216:2015(E) ISO 2015 All rights reservedBS ISO 20216:2015BS ISO 20216:2015CCSDS RECOMMENDED PRACTICE FOR SOIS DEVICE DAT
29、A POOLING SERVICE CCSDS 871.1-M-1 Page i November 2012 AUTHORITYIssue: Recommended Practice, Issue 1 Date: November 2012 Location: Washington, DC, USA This document has been approved for publication by the Management Council of the Consultative Committee for Space Data Systems (CCSDS) and represents
30、 the consensus technical agreement of the participating CCSDS Member Agencies. The procedure for review and authorization of CCSDS documents is detailed in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-3), and the record of Agency participation in th
31、e authorization of this document can be obtained from the CCSDS Secretariat at the address below. This document is published and maintained by: CCSDS Secretariat Space Communications and Navigation Office, 7L70 Space Operations Mission Directorate NASA Headquarters Washington, DC 20546-0001, USA ISO
32、 20216:2015(E) ISO 2015 All rights reservedBS ISO 20216:2015CCSDS RECOMMENDED PRACTICE FOR SOIS DEVICE DATA POOLING SERVICE CCSDS 871.1-M-1 Page ii November 2012 STATEMENT OF INTENT The Consultative Committee for Space Data Systems (CCSDS) is an organization officially established by the management
33、of its members. The Committee meets periodically to address data systems problems that are common to all participants, and to formulate sound technical solutions to these problems. Inasmuch as participation in the CCSDS is completely voluntary, the results of Committee actions are termed Recommendat
34、ions and are not in themselves considered binding on any Agency. CCSDS Recommendations take two forms: Recommended Standards that are prescriptive and are the formal vehicles by which CCSDS Agencies create the standards that specify how elements of their space mission support infrastructure shall op
35、erate and interoperate with others; and Recommended Practices that are more descriptive in nature and are intended to provide general guidance about how to approach a particular problem associated with space mission support. This Recommended Practice is issued by, and represents the consensus of, th
36、e CCSDS members. Endorsement of this Recommended Practice is entirely voluntary and does not imply a commitment by any Agency or organization to implement its recommendations in a prescriptive sense. No later than five years from its date of issuance, this Recommended Practice will be reviewed by th
37、e CCSDS to determine whether it should: (1) remain in effect without change; (2) be changed to reflect the impact of new technologies, new requirements, or new directions; or (3) be retired or canceled. In those instances when a new version of a Recommended Practice is issued, existing CCSDS-related
38、 member Practices and implementations are not negated or deemed to be non-CCSDS compatible. It is the responsibility of each member to determine when such Practices or implementations are to be modified. Each member is, however, strongly encouraged to direct planning for its new Practices and implem
39、entations towards the later version of the Recommended Practice. ISO 20216:2015(E) ISO 2015 All rights reservedBS ISO 20216:2015BS ISO 20216:2015CCSDS RECOMMENDED PRACTICE FOR SOIS DEVICE DATA POOLING SERVICE CCSDS 871.1-M-1 Page iii November 2012 FOREWORDThis document is a technical Recommended Pra
40、ctice for use in developing flight and ground systems for space missions and has been prepared by the Consultative Committee for Space Data Systems (CCSDS). The Device Data Pooling Service described herein is intended for missions that are cross-supported between Agencies of the CCSDS, in the framew
41、ork of the Spacecraft Onboard Interface Services (SOIS) CCSDS area. This Recommended Practice specifies a set of related services to be used by space missions to access pooled data acquired from devices over an onboard subnetwork. The SOIS Device Data Pooling Service provides a common service interf
42、ace and quality of service regardless of the particular type of data link or protocol being used for communication. Through the process of normal evolution, it is expected that expansion, deletion, or modification of this document may occur. This Recommended Practice is therefore subject to CCSDS do
43、cument management and change control procedures, which are defined in the Organization and Processes for the Consultative Committee for Space Data Systems(CCSDS A02.1-Y-3). Current versions of CCSDS documents are maintained at the CCSDS Web site: http:/www.ccsds.org/Questions relating to the content
44、s or status of this document should be addressed to the CCSDS Secretariat at the address indicated on page i. ISO 20216:2015(E) ISO 2015 All rights reservedBS ISO 20216:2015CCSDS RECOMMENDED PRACTICE FOR SOIS DEVICE DATA POOLING SERVICE CCSDS 871.1-M-1 Page iv November 2012 At time of publication, t
45、he active Member and Observer Agencies of the CCSDS were: Member Agencies Agenzia Spaziale Italiana (ASI)/Italy. Canadian Space Agency (CSA)/Canada. Centre National dEtudes Spatiales (CNES)/France. China National Space Administration (CNSA)/Peoples Republic of China. Deutsches Zentrum fr Luft- und R
46、aumfahrt e.V. (DLR)/Germany. European Space Agency (ESA)/Europe. Federal Space Agency (FSA)/Russian Federation. Instituto Nacional de Pesquisas Espaciais (INPE)/Brazil. Japan Aerospace Exploration Agency (JAXA)/Japan. National Aeronautics and Space Administration (NASA)/USA. UK Space Agency/United K
47、ingdom. Observer Agencies Austrian Space Agency (ASA)/Austria. Belgian Federal Science Policy Office (BFSPO)/Belgium. Central Research Institute of Machine Building (TsNIIMash)/Russian Federation. China Satellite Launch and Tracking Control General, Beijing Institute of Tracking and Telecommunicatio
48、ns Technology (CLTC/BITTT)/China. Chinese Academy of Sciences (CAS)/China. Chinese Academy of Space Technology (CAST)/China. Commonwealth Scientific and Industrial Research Organization (CSIRO)/Australia. CSIR Satellite Applications Centre (CSIR)/Republic of South Africa. Danish National Space Cente
49、r (DNSC)/Denmark. Departamento de Cincia e Tecnologia Aeroespacial (DCTA)/Brazil. European Organization for the Exploitation of Meteorological Satellites (EUMETSAT)/Europe. European Telecommunications Satellite Organization (EUTELSAT)/Europe. Geo-Informatics and Space Technology Development Agency (GISTDA)/Thailand. Hellenic National Space Committee (HNSC)/Greece. Indian Space Research Organization (ISRO)/India. Institute of Space Research (IKI)/Russian Federa
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1