BS ISO 21047-2009 Information and documentation - International standard text code (ISTC)《信息和文献工作 国际标准文本代码(ISTC)》.pdf

1、BS ISO21047:2009ICS 01.140.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDInformation anddocumentation International StandardText Code (ISTC)This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 August2009 BS

2、I 2009ISBN 978 0 580 54133 9Amendments/corrigenda issued since publicationDate CommentsBS ISO 21047:2009National forewordThis British Standard is the UK implementation of ISO 21047:2009.The UK participation in its preparation was entrusted to TechnicalCommittee IDT/2/18, Identifiers and metadata.A l

3、ist of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal

4、obligations.BS ISO 21047:2009Reference numberISO 21047:2009(E)ISO 2009INTERNATIONAL STANDARD ISO21047First edition2009-03-01Information and documentation International Standard Text Code (ISTC) Information et documentation Code international normalis des textes (ISTC) BS ISO 21047:2009ISO 21047:2009

5、E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this fi

6、le, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info r

7、elative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. CO

8、PYRIGHT PROTECTED DOCUMENT ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address bel

9、ow or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2009 All rights reservedBS ISO 21047:2009ISO 21047:2009(E) ISO 2009 All

10、rights reserved iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Structure and syntax of the ISTC 3 4.1 Basic structure and syntax 3 4.2 Registration element 3 4.3 Year element 3 4.4 Textual work element . 3 4.5 Check digit. 3 5 Allocati

11、on of an ISTC 3 6 Administration of the ISTC system. 4 7 Association of an ISTC with ISTC metadata 4 8 Relationship with other identifiers 4 Annex A (normative) Method for calculation of the check digit for an ISTC . 5 Annex B (normative) Principles for the allocation and use of ISTC . 6 Annex C (no

12、rmative) Administration of the ISTC system 8 Annex D (normative) ISTC metadata for registration of textual works. 10 Annex E (informative) Relationships between ISTC and publication identifiers. 14 Bibliography . 22 BS ISO 21047:2009ISO 21047:2009(E) iv ISO 2009 All rights reservedForeword ISO (the

13、International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee

14、 has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnic

15、al standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bo

16、dies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying an

17、y or all such patent rights. ISO 21047 was prepared by Technical Committee ISO/TC 46, Information and documentation, Subcommittee SC 9, Identification and description. BS ISO 21047:2009ISO 21047:2009(E) ISO 2009 All rights reserved vIntroduction The purpose of the International Standard Text Code (I

18、STC) is to enable the efficient identification of textual works. The ISTC provides a means of uniquely and persistently identifying textual works in information systems and of facilitating the exchange of information about those textual works between authors, agents, publishers, retailers, libraries

19、 rights administrators and other interested parties, on an international level. BS ISO 21047:2009BS ISO 21047:2009INTERNATIONAL STANDARD ISO 21047:2009(E) ISO 2009 All rights reserved 1Information and documentation International Standard Text Code (ISTC) 1 Scope This International Standard specifie

20、s the International Standard Text Code (ISTC) which is applicable to any textual work, whenever there is an intention to produce such a textual work in the form of one or more manifestations. It provides an identification data element for applications that record and exchange information about textu

21、al works and related manifestations. For example, the ISTC can be used for the purposes of collocating subsequent manifestations of the same textual work or derivations of the same textual work in applications involving electronic rights administration or information retrieval. The ISTC is not appli

22、cable to manifestations of a textual work, including any physical products (e.g. a printed article) or electronic formats (e.g. an electronic book). Manifestations of textual works are the subject of separate identification systems. The allocation of an ISTC to a textual work gives no meaning or val

23、ue as legal evidence regarding the copyright status of, or any intellectual property rights in, the textual work. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refere

24、nces, the latest edition of the referenced document (including any amendments) applies. ISO 639-2, Codes for the representation of names of languages Part 2: Alpha-3 code ISO/IEC 7064, Information technology Security techniques Check character systems 3 Terms and definitions For the purposes of this

25、 document, the following terms and definitions apply. 3.1 administrative metadata data collected for the management of the ISTC registration process including data about the registrant (3.10) 3.2 author creator (3.5) wholly or partly responsible for the intellectual content of a textual work (3.12)

26、3.3 check digit added digit that may be used to verify the accuracy of a standard number through a mathematical relationship with the digits contained in that number BS ISO 21047:2009ISO 21047:2009(E) 2 ISO 2009 All rights reserved3.4 contributor person or organization contributing to the making of

27、a textual work (3.12) in whole or in part 3.5 creator contributor (3.4) responsible for originating content in a textual work (3.12) 3.6 derivation distinctive textual work (3.12) made predominantly out of material from another textual work (3.12) or works 3.7 ISTC metadata descriptive data declared

28、 and recorded as part of the ISTC registration process that allows one textual work (3.12) identified with an ISTC to be distinguished from any other textual work (3.12) identified with an ISTC 3.8 textual manifestation tangible or intangible fixation of a textual work (3.12) in one or more copies E

29、XAMPLE A manuscript, a printed publication, an electronic text file, a spoken word recording. 3.9 register structured records of registered ISTC and their associated metadata 3.10 registrant person or organization that has requested and received an ISTC for a textual work (3.12) from a designated IS

30、TC Registration Authority (3.11) within the ISTC system 3.11 ISTC Registration Authority organization appointed by ISO for the purposes of administering the ISTC system and managing its deployment 3.12 textual work distinct, abstract creation of intellectual or artistic content composed predominantl

31、y of a combination of words, whose existence is revealed or intended to be revealed through one or more textual manifestations (3.8) NOTE For the purposes of ISTC registration, the term textual work (3.12) also encompasses the various categories of expression of intellectual or artistic content in t

32、extual form (e.g. a novel, a play, a translation) but excludes any aspects of physical form (e.g. print, electronic) in which such expressions are made manifest. See textual manifestation (3.8). 3.13 title word, phrase, character or group of characters, usually appearing on textual manifestations (3

33、8) of a textual work (3.12), that names the textual work and normally distinguishes it from others NOTE Adapted from ISO 690-2:1997, definition 3.17, and ISO 5127:2001, definition 4.2.1.4.01. BS ISO 21047:2009ISO 21047:2009(E) ISO 2009 All rights reserved 34 Structure and syntax of the ISTC 4.1 Bas

34、ic structure and syntax An ISTC shall consist of 16 hexadecimal digits using numerals 0 to 9 and letters A to F. It shall be made up of the following parts: registration element; year element; textual work element; check digit. When an ISTC is displayed in written or printed form, the letters ISTC s

35、hall precede it. To assist in accurate transcription of the ISTC, all parts should be separated from each other by hyphens or spaces, as shown in the following examples. EXAMPLES ISTC 0A9 2002 12B4A105 7 ISTC 0A9-2002-12B4A105-7 4.2 Registration element The first part of an ISTC shall be the registr

36、ation element. The registration element shall consist of three hexadecimal digits. The registration element shall be allocated by the ISTC Registration Authority for its internal identification purposes. 4.3 Year element The second part of an ISTC shall be the year element. The year element shall co

37、nsist of the four digits representing the year in which the ISTC is allocated. 4.4 Textual work element The third part of an ISTC shall be the textual work element. The textual work element shall consist of eight hexadecimal digits. The textual work element shall be allocated by the ISTC Registratio

38、n Authority to the textual work. 4.5 Check digit The fourth and final part of an ISTC shall be the check digit. The check digit shall be calculated on a MOD 16-3 system defined in accordance with ISO/IEC 7064. See Annex A for further details. 5 Allocation of an ISTC See Annex B for the principles fo

39、r the allocation and use of ISTC. BS ISO 21047:2009ISO 21047:2009(E) 4 ISO 2009 All rights reserved6 Administration of the ISTC system The ISTC system shall be administered by the ISTC Registration Authority for this International Standard (hereafter referred to as the ISTC Registration Authority).

40、The principal tasks of the ISTC Registration Authority are outlined in Annex C. 7 Association of an ISTC with ISTC metadata An ISTC shall be associated with ISTC metadata (see Annex D) about the textual work it identifies by means of a register. The ISTC Registration Authority shall maintain the reg

41、ister. 8 Relationship with other identifiers Examples of the relationship between an ISTC and other ISO identification systems such as the International Standard Book Number (ISBN) and International Standard Serial Number (ISSN) are given in Annex E. BS ISO 21047:2009ISO 21047:2009(E) ISO 2009 All r

42、ights reserved 5Annex A (normative) Method for calculation of the check digit for an ISTC The algorithm for calculating the check digit for an ISTC shall be based on ISO/IEC 7064 but uses a MOD 16-3 to handle the hexadecimal character of the ISTC, as shown in Table A.1. Table A.1 Hexadecimal (MOD 16

43、3) check digit routine for the ISTC ISTC component elements Parameter Registration element Year element Textual work element Check digit n = ISTC number input value 0 A 9 2 0 0 2 1 2 2 3 F 3 3 2 0 i = Position index 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 wi= Weight for MOD 16-3 using pure system we

44、ights 11 9 3 1 11 9 3 1 11 9 3 1 11 9 3 1 h = Hex conversion of n 0 10 9 2 0 0 2 1 2 2 3 15 3 3 2 0 p = Product (h wi) 0 90 27 2 0 0 6 1 22 18 9 15 33 27 6 s = Sum of products 256 cd= Decimal check digit (MOD 16 of 256) 0 c = ISTC check digit based on the hexadecimal of cd0 BS ISO 21047:2009ISO 2104

45、7:2009(E) 6 ISO 2009 All rights reservedAnnex B (normative) Principles for the allocation and use of ISTC B.1 Allocation of ISTC B.1.1 The ISTC Registration Authority shall allocate an ISTC to a textual work upon request from an author or other person or organization responsible for the creation of

46、that textual work (a “creator”), or from any person or organization authorized to represent the creator. Where reasonable investigation has not located and could not locate a creator or an authorized representative of a creator, any person or organization may request an ISTC. B.1.2 The same ISTC sha

47、ll not be allocated to more than one textual work. B.1.3 The same textual work shall not be allocated more than one ISTC. B.1.4 Registrants shall supply metadata about the textual work being registered in accordance with the specifications established by the ISTC Registration Authority. See B.2 and

48、Annex D. B.1.5 Textual works that are eligible for an ISTC include any distinct abstract entity, predominantly composed of a combination of words, that can be described to satisfy the ISTC metadata requirements. B.1.6 In order to be assigned an ISTC, the declared metadata for any textual work at the

49、 time of registration shall contain at least one element pertaining to the work itself that distinguishes it from every other textual work to which an ISTC has already been assigned. If two entities share identical ISTC metadata, they shall be treated as the same textual work and shall have the same ISTC. B.1.7 An ISTC may be allocated to a textual work at any time; this includes retrospective allocation of an ISTC to textual works already in existence before the implementation of this International Standard. B.1.8 A