BS ISO 242-2014 Carbide tips for brazing on turning tools《硬质合金焊接车刀片》.pdf

1、BSI Standards PublicationBS ISO 242:2014Carbide tips for brazing onturning toolsBS ISO 242:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 242:2014.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts f

2、or cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. P

3、ublished by BSI StandardsLimited 2014ISBN 978 0 580 84928 2ICS 25.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2014.Amendments issued since public

4、ationDate Text affectedBS ISO 242:2014 ISO 2014Carbide tips for brazing on turning toolsPlaquettes braser en carbures mtalliques pour outils de tourINTERNATIONAL STANDARDISO242Second edition2014-07-15Reference numberISO 242:2014(E)BS ISO 242:2014ISO 242:2014(E)ii ISO 2014 All rights reservedCOPYRIGH

5、T PROTECTED DOCUMENT ISO 2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission

6、. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 242:2014ISO 242:

7、2014(E) ISO 2014 All rights reserved iiiContents PageForeword iv1 Scope . 12 Interchangeability 13 Types and dimensions 1Annex A (informative) Relationship between designations in ISO 242 and ISO 13399 series 3Bibliography 4BS ISO 242:2014ISO 242:2014(E)ForewordISO (the International Organization fo

8、r Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the

9、 right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The proced

10、ures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial

11、 rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights id

12、entified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanatio

13、n on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.The committee responsible for this document

14、is ISO/TC 29, Small tools, Subcommittee SC 9, Tools with cutting edges made of hard cutting materials.This second edition cancels and replaces the first edition (ISO 242:1975), of which it constitutes a minor revision.iv ISO 2014 All rights reservedBS ISO 242:2014INTERNATIONAL STANDARD ISO 242:2014(

15、E)Carbide tips for brazing on turning tools1 ScopeThis International Standard specifies the dimensions of carbide tips for turning tools intended to be fixed on the shanks of tools by brazing.NOTE Throwaway carbide indexable inserts are the subject of ISO 883.2 InterchangeabilityThe dimensions adopt

16、ed are unified dimensions intended to permit interchangeability between the tips and the tool shanks on which they have to be mounted.3 Types and dimensionsTips with a thickness below 4 mm are supplied without a chamfer at the base and without the clearance angle; cutting edges may be slightly round

17、ed.The nominal lengths of types (see Figure 1) are given in Table 1.Figure 1 Types ISO 2014 All rights reserved 1BS ISO 242:2014ISO 242:2014(E)Table 1 Nominal lengths of typesDimensions in millimetresTypes A and B C D ENominal lengthl t s r l t s l t s l t s3 3,5 8 3 4 4,5 10 4 4 10 2,55 5 3 2 2 5 3

18、 2 5,5 12 5 5 12 36 6 4 2,5 2,5 6 4 2,5 6,5 14 6 6 14 3,58 8 5 3 3 8 5 3 8,5 16 8 8 16 410 10 6 4 4 10 6 4 10,5 18 10 10 18 512 12 8 5 5 12 8 5 12,5 20 12 12 20 616 16 10 6 6 16 10 6 16 22 720 20 12 7 7 20 12 7 20 25 825 25 14 8 8 25 14 8 25 28 932 32 18 10 10 32 18 10 32 32 1040 40 22 12 12 40 22 1

19、2 50 50 25 14 14 50 25 14 All the dimensions given are minimum dimensions.2 ISO 2014 All rights reservedBS ISO 242:2014ISO 242:2014(E)Annex A (informative) Relationship between designations in ISO 242 and ISO 13399 seriesTable A.1 Relationship between designations in ISO 242 and ISO 13399 seriesSymb

20、ol in ISO 242Reference in ISO 242 Property name in ISO 13399Symbol in ISO 13399Reference in ISO 13399l Figure 1, style A, B, C, D, E; tableinsert length INSL ISO/TS 13399-2ID-#: 71CE7A9DFA23Ar Figure 1, style A, B; table mating radius RCON ISO/TS 13399-2ID-#: 727BE4EA8C69Ds Figure 1, style A, B, C,

21、D, E; tableinsert thickness S ISO/TS 13399-2ID-#: 71CE7A9F5308Ct Figure 1, style A, B, C, D, E; tableinsert width W1 ISO/TS 13399-2ID-#: 71CE7A9FB11C318 and 14 Figure 1, style A, B, C, D clearance angle majorAN ISO/TS 13399-2ID-#: 71DD70308D3E39 Figure 1, style E clearance angle majorAN ISO/TS 13399

22、-2ID-#: 71DD70308D3E380 Figure 1, style E insert included angle EPSR ISO/TS 13399-2ID-#: 71CE7A96BC122 ISO 2014 All rights reserved 3BS ISO 242:2014ISO 242:2014(E)Bibliography1 ISO 241, Shanks for turning and planing tools Shapes and dimensions of the section2 ISO 513, Classification and application

23、 of hard cutting materials for metal removal with defined cutting edges Designation of the main groups and groups of application3 ISO 883, Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole Dimensions4 ISO 13399 (all parts), Cutting tool data representation and exchange4

24、 ISO 2014 All rights reservedBS ISO 242:2014BS ISO 242:2014ISO 242:2014(E) ISO 2014 All rights reservedICS 25.100.10Price based on 4 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and se

25、rvices.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers

26、, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors ch

27、oose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou ca

28、n buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be

29、 ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted Europ

30、ean and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming

31、 a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a

32、 Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur Brit

33、ish Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightA

34、ll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such infor

35、mation to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permiss

36、ion from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW