BS ISO 24409-2-2014 Ships and marine technology Design location and use of shipboard safety signs safety-related signs safety notices and safety markings Catalogue《船舶与海洋技术 船舶安全标志 与.pdf

1、BSI Standards Publication BS ISO 24409-2:2014 Ships and marine technology Design, location and use of shipboard safety signs, safety- related signs, safety notices and safety markings Part 2: CatalogueBS ISO 24409-2:2014 BRITISH STANDARD National foreword This British Standard is the UK implementati

2、on of ISO 24409-2:2014. The UK participation in its preparation was entrusted to Technical Committee SME/32/-/1, Lifesaving and fire protection. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the nec

3、essary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 66169 3 ICS 47.020.01 Compliance with a British Standard cannot confer immunity from legal obligations. This British Stan

4、dard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2014. Amendments issued since publication Date Text affectedBS ISO 24409-2:2014Reference number ISO 24409-2:2014(E) ISO 2014INTERNATIONAL STANDARD ISO 24409-2 First edition 2014-01-15 Ships and marine

5、 technology Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Part 2: Catalogue Navires et technologie maritime Conception, emplacement et utilisation des signaux de scurit, signaux relatifs la scurit, notes de scurit et marquages de scurit

6、bord des navires Partie 2: Catalogue BS ISO 24409-2:2014 ISO 24409-2:2014(E) COPYRIGHT PROTECTED DOCUMENT ISO 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including pho

7、tocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749

8、09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2014 All rights reservedBS ISO 24409-2:2014 ISO 24409-2:2014(E) ISO 2014 All rights reserved iiiContents Page 1 Scope 1 2 Normative references 1 3 Terms and definitions . 2 4 Categorization of shipboard signs 2 5 Standardi

9、zed shipboard safety sign and fire control plan signs . 14 BS ISO 24409-2:2014 ISO 24409-2:2014(E) iv ISO 2014 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Intern

10、ational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with

11、 ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives,

12、 Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of

13、the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations

14、 received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about I

15、SOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/TC 8, Ships and marine technology, Subcommittee SC 1, Lifesaving and fire protection. ISO 24409 consists of the

16、following parts, under the general title Ships and marine technology Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings: Part 1: Design principles Part 2: Catalogue Part 3: Code of practice BS ISO 24409-2:2014 ISO 24409-2:2014(E) ISO 2014 All

17、 rights reserved vIntroduction The growth of international travel by ship has created a need to provide people travelling and working on-board ships with signs and associated systems that communicate consistent and effective safety information. This part of ISO 24409 specifies a system of safety and

18、 safety-related signs on ships and other marine installations that is generally consistent with standardized signs with which many will have gained familiarity in other applications. As such, this part of ISO 24409 clarifies and supplements existing requirements set out in SOLAS regulations II-2/13.

19、3.2.5.1, III/9.2.3, III/11.5, III/20.10, and ISO 17631. However, it is directly applicable to shipboard safety and safety-related signs only, and does not deal with graphical symbols to be used on shipboard plans or documentation. This part of ISO 24409 contains a catalogue of signs developed in acc

20、ordance with the general design principles specified in Part 1, for application on ships in accordance with the code of practice in Part 3. BS ISO 24409-2:2014BS ISO 24409-2:2014 INTERNATIONAL STANDARD ISO 24409-2:2014(E) ISO 2014 All rights reserved 1Ships and marine technology Design, location and

21、 use of shipboard safety signs, safety-related signs, safety notices and safety markings Part 2: Catalogue IMPORTANT The colours represented in the electronic file of this part of ISO 24409 can be neither viewed on screen nor printed as true representations. Although the copies of this part of ISO 2

22、4409 printed by ISO have been produced to correspond (with an acceptable tolerance as judged by the naked eye) to the requirements of ISO 3864-4, it is not intended that these printed copies be used for colour matching. Instead consult ISO 3864-4 which provides colorimetric and photometric propertie

23、s together with, as a guideline, references from colour order systems. For a definitive version of all ISO symbols for use in application of this part of ISO 24409, please consult the ISO Online Browsing Platform (http:/www.iso.org/obp/ui/). 1 Scope This part of ISO 24409 prescribes standardized sig

24、ns and safety notices specifically for use on board ships. Each sign is categorized and indexed according to the safety message that is to be conveyed. Each sign is provided with relevant information on the preferred format of use, the context in which it is used and displayed as well as a descripti

25、on of the intended audience. The shape and colour required to be used for each sign, as prescribed by ISO 3864-4, are given together with the graphical symbols contained within each sign. This part of ISO 24409 specifies the sign originals that may be scaled for reproduction and application purposes

26、 It includes signs which require supplementary text signs to be used in conjunction with them to improve comprehension. This catalogue is intended to be under continual revision as new shipboard signs and notices are added and as new requirements are identified and corresponding safety signs and no

27、tices are developed and standardised. Where an ISO 7010 reference number is given in this part of ISO 24409 it means that the sign is identical to the one in ISO 7010. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensab

28、le for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3864 (all parts), Graphical symbols Safety colours and safety signs ISO 7010, Graphical symbols Safety colours a

29、nd safety signs Registered safety signs ISO 17631, Ships and marine technology Shipboard plans for fire protection, life-saving appliances and means of escape ISO 17724, Graphical symbols Vocabulary BS ISO 24409-2:2014 ISO 24409-2:2014(E) 2 ISO 2014 All rights reservedISO 24409-1, Ships and marine t

30、echnology Design, location, and use of shipboard safety signs Part 1: Design principles 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 17724, ISO 24409-1, and the following apply. 3.1 fire control plan signs signs used to identify and locate equipme

31、nt shown on the fire control plan Note 1 to entry: These signs are related to the symbols in ISO 17631; see 4.1 h) below. 3.2 image content written description of the elements of a graphical symbol or safety sign and their relative disposition 3.3 referent idea or object that a graphical symbol is i

32、ntended to represent 3.4 safety sign original safety sign with which a referent, a graphical representation and a description of the application are associated 4 Categorization of shipboard signs 4.1 Shipboard signs are categorized according to their function as follows. a) MES is the category for m

33、eans of escape signs which provide escape route identification. b) EES is the category for emergency equipment signs which provide use and location of first aid facilities and portable safety equipment. c) LSS is the category for life saving systems and appliances signs which provide use and locatio

34、n of life saving systems and appliances. d) FES is the category for fire-fighting equipment signs which provide use and location of fire- fighting equipment. e) PSS is the category for prohibition signs which provide prohibited actions. f) WSS is the category for hazard warning signs which provide i

35、dentification of hazards to avoid. g) MSS is the category for mandatory action signs which provide mandatory notices and instructions. NOTE The PSS, WSS and MSS categories are the same, respectively, as the P, W and M categories of ISO 7010. h) SIS is the category for safety and operating instructio

36、ns for trained personnel. Most of these signs are taken from IMO Resolution A.952(23) for fire control symbols and ISO 17631. BS ISO 24409-2:2014 ISO 24409-2:2014(E) ISO 2014 All rights reserved 3However, the following list shows symbols from A.952(23) that have been replaced by the use of safety si

37、gns meeting ISO 3864-1 and are part of the FES category: 1) FES012 remote release station replaces 2.13. 2) FES009 Fixed fire extinguishing installation replaces 2.20. 3) FES005 Fixed fire extinguishing battery replaces 2.21. 4) FES010 Fixed fire extinguishing bottle replaces 2.22. 5) FES013 Fire mo

38、nitor replaces 2.26. 6) FES002 Fire hose reel replaces 2.27. 7) FES001 Fire extinguisher replaces 2.28. 8) FES006 Wheeled fire extinguisher replaces 2.29. 9) FES007 Portable foam replaces 2.30. 10) FES003 Collection of fire fighting equipment replaces 2.31. 11) FES008 Water fog applicator replaces 2

39、33. 12) FES011 Push button for general alarm replaces 2.39. 13) FES004 Fire alarm call point replaces 2.40. i) SMS is the category for mimic signs. Refer to SOLAS regulation II-2/13.7.2.2, and the cabin instructions referred to in SOLAS regulation III/8.4 and IMO Resolution A.752(18). 4.2 Table 1 s

40、ummarizes the standardized safety signs, with the exception of SIS and mimic signs, used in workplaces and public areas in terms of functional category, referent number, referent, graphical symbol as well as geometric shape and colour in accordance with the design principles in ISO 24409-1. BS ISO 2

41、4409-2:2014 ISO 24409-2:2014(E) 4 ISO 2014 All rights reservedTable 1 Summary of safety signs for shipboard use CATEGORY MES EES LSS FES PSS WSS MSS Means of Escape Signs Emergency Equipment Signs Lifesaving Signs Fire-fighting Equipment Signs Prohibition Signs Warning Signs Mandatory Signs MES001 (

42、ISO 7010- E032) Assembly station EES001 (ISO 7010- E003) First Aid LSS001 (ISO 7010- E036) Lifeboat FES001 (ISO 7010- F001) Fire extinguisher PSS001 (ISO 7010- P001) General prohibition WSS001 (ISO 7010- W001) General warning MSS001 (ISO 7010- M001) General Mandatory action MES002 (ISO 7010- E001) E

43、mergency exit (left hand) EES002 (ISO 7010- Emergency E004) telephone LSS002 (ISO 7010- E037) Rescue boat FES002 (ISO 7010- F002) Fire hose reel PSS002 (ISO 7010- P002) No smokingWSS002 (ISO 7010- W002) Warning; Explosive material MSS002 (ISO 7010- M002) Refer to instruction manual or booklet BS ISO

44、 24409-2:2014 ISO 24409-2:2014(E) ISO 2014 All rights reserved 5CATEGORY MES EES LSS FES PSS WSS MSS MES003 (ISO 7010- E002) Emergency exit (right hand) EES003 (ISO 7010- E011) Eye wash station LSS003 (ISO 7010- E038) Liferaft FES003 (ISO 7010- F004) Collection of fire fighting equipment PSS003 (ISO

45、 7010- P003) No open flame; fire, open ignition source and smoking prohibited WSS003 (ISO 7010- W003) Warning; Radioactive material or ionizing radiation MSS003 (ISO 7010- M003) Wear ear protection MES004 (ISO 7010- E033) Door slides right to open EES004 (ISO 7010- E012) Emergency shower LSS004 (ISO

46、 7010- E039) Davit- launched liferaft FES004 (ISO 7010- F005) Fire alarm call point PSS004 (ISO 7010- P004) No thoroughfareWSS004 (ISO 7010- W004) Warning; Laser beam MSS004 (ISO 7010- M004) Wear eye protection MES005 (ISO 7010- E034) Door slides left to open EES005 (ISO 7010- E013) Stretcher LSS005

47、 (ISO 7010- E040) Lifebuoy FES005 (ISO 7010- F008) Fixed fire extinguishing battery PSS005 (ISO 7010- P005) Not drinking water WSS005 (ISO 7010- W005) Warning; Non- ionizing radiation MSS005 (ISO 7010- M005) Connect an earth terminal to the groundBS ISO 24409-2:2014 ISO 24409-2:2014(E) 6 ISO 2014 Al

48、l rights reservedCATEGORY MES EES LSS FES PSS WSS MSS MES 006 (ISO 7010- E018) Turn anti- clockwise to open EES006 (ISO 7010- E027) Medical grab bag LSS006 (ISO 7010- E041) Lifebuoy with line FES006 (ISO 7010- F009) Wheeled fire extinguisher PSS006 (ISO 7010- P006) No access for fork lift trucks and

49、 other industrial vehicles WSS006 (ISO 7010- W006) Warning; Magnetic field MSS006 (ISO 7010- M006) Disconnect mains plug from electrical outlet MES007 (ISO 7010- E019) Turn clockwise to open EES007 (ISO 7010- E028) Oxygen resuscitator LSS007 (ISO 7010- E042) Lifebuoy with light FES007 (ISO 7010- F010) Portable foam PSS007 (ISO 7010- P007) No access for people with active implanted cardiac devices WSS007 (ISO 7010- W007) Warning; Floor level obstacle MSS007 (ISO 7010- M007) Wear opaque eye prot