1、Radiofrequency identification of animalsPart 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785BS ISO 246312:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Radiofrequency identification of animals Part 2: Evaluation of confor
2、mance of RFID transceivers with ISO 11784 and ISO 11785Identification des animaux par radiofrquence Partie 2: valuation de la conformit des metteurs-rcepteurs RFID lISO 11784 et lISO 11785INTERNATIONAL STANDARDISO24631-2Second edition2017-09Reference numberISO 24631-2:2017(E)National forewordThis Br
3、itish Standard is the UK implementation of ISO 246312:2017. It supersedes BS ISO 246312:2009, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AGE/6/1, Radio Frequency ID for Animals.A list of organizations represented on this committee can be obtained
4、on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 81932 2ICS 65.040.99Compliance with a B
5、ritish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 246312:2017 ISO 2017Radiofr
6、equency identification of animals Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785Identification des animaux par radiofrquence Partie 2: valuation de la conformit des metteurs-rcepteurs RFID lISO 11784 et lISO 11785INTERNATIONAL STANDARDISO24631-2Second edition2017
7、-09Reference numberISO 24631-2:2017(E)BS ISO 246312:2017ISO 24631-2:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or
8、 by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 C
9、P 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 246312:2017ISO 24631-2:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of
10、this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in
11、 the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 24631-2:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Conformance
12、. 35 Abbreviated terms 36 Application . 37 Test procedures . 47.1 General . 47.2 Activation field frequency . 47.3 Functional test . 47.4 Timing of activation field . 57.5 Wireless synchronization test . 57.6 Test apparatus . 67.7 Test setups 77.8 Test conditions 9Annex A (normative) Test applicatio
13、n form (ISO 24631-2) 10Annex B (normative) Conditions of use of transceiver registration (ISO 24631-2) .11Bibliography .12 ISO 2017 All rights reserved iiiContents PageBS ISO 246312:2017ISO 24631-2:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of n
14、ational standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Inter
15、national organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those inte
16、nded for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www
17、.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document w
18、ill be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meani
19、ng of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technica
20、l Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 19, Agricultural electronics.This second edition cancels and replaces the first edition (ISO 24631-2:2009), which has been technically revised.The main changes compared to the previous edition are as follows:
21、 a check has been included that the reading of the manufacturer/country code and the identification code is not affected by the RUDI bit (see 7.3).A list of all parts in the ISO 24631 series can be found on the ISO website.iv ISO 2017 All rights reservedBS ISO 246312:2017ISO 24631-2:2017(E)ForewordI
22、SO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical c
23、ommittee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electr
24、otechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was dra
25、fted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent ri
26、ghts. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not consti
27、tute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see t
28、he following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 19, Agricultural electronics.This second edition cancels and replaces the first edition (ISO 24631-2:2009), which has been
29、 technically revised.The main changes compared to the previous edition are as follows: a check has been included that the reading of the manufacturer/country code and the identification code is not affected by the RUDI bit (see 7.3).A list of all parts in the ISO 24631 series can be found on the ISO
30、 website.iv ISO 2017 All rights reserved ISO 24631-2:2017(E)IntroductionISO has appointed a registration authority (RA) competent to register manufacturer codes used in the radiofrequency identification (RFID) of animals in accordance with ISO 11784 and ISO 11785.The registration authority for ISO 1
31、1784 and ISO 11785 can found under http:/www.iso.org/iso/home/standards_development/list_of_iso_technical_committees/maintenance_agencies.htm.This document deals with the conformance of RFID transceivers. ISO 2017 All rights reserved vBS ISO 246312:2017BS ISO 246312:2017Radiofrequency identification
32、 of animals Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 117851 ScopeThis document provides the means of evaluating the conformance with ISO 11784 and ISO 11785 of radiofrequency identification (RFID) transceivers used in the individual identification of animals. It
33、also specifies the procedure for applying for a transceiver test registration and the associated rights and obligations of the parties involved.This document includes a wireless synchronization test applicable to mobile transceivers; however, it contains no provision for evaluating the wired synchro
34、nization of stationary transceivers.The test procedures specified in this document are recognized by the Federation of European Companion Animals Veterinary Association (FECAVA) and World Small Animal Veterinarian Association (WSAVA) and, as such, can be applied also to companion animals.2 Normative
35、 referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendme
36、nts) applies.ISO 11784, Radio frequency identification of animals Code structureISO 11785:1996, Radio frequency identification of animals Technical concept3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminological databases
37、 for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp3.1accreditationthird-party attestation related to a conformity assessment body conveying formal demonstration of its com
38、petence to carry out specific conformity assessment tasksSOURCE: ISO/IEC 17000:2004, 5.63.2registration reference numbernumber issued to the manufacturer (3.6) of a registered transceiver (3.12) by the registration authority (3.11)EXAMPLE ISO 24631-2 2017-02-001INTERNATIONAL STANDARD ISO 24631-2:201
39、7(E) ISO 2017 All rights reserved 1BS ISO 246312:2017ISO 24631-2:2017(E)Note 1 to entry: It comprises the reference of the International Standard for which registration is made, the year of issue (4 digits), the type of device tested (“02” for transceivers according to this document) and the running
40、 number (3 digits) referencing the transceivers tested successfully during that year.3.3country codethree-digit numeric code representing a country in accordance with ISO 3166-13.4ISO 11784 and ISO 11785 transceivertransceiver (3.12) that reads at least both FDX-B and HDX transponders as defined in
41、ISO 11784 and ISO 117853.5ISO 11784 and ISO 11785 transponderradiofrequency identification (RFID) device that transmits its transponder code (3.14) according to ISO 11784 and ISO 11785 when activated by a transceiver (3.12)3.6manufacturercompany that submits an application for testing transceivers (
42、3.12) for conformance with ISO 11784 and ISO 117853.7manufacturer codeMFCthree-digit number granted by the RA to a manufacturer (3.6) under the conditions set forth in ISO 24631-1:2017, Annex E, whose range and placement within the code structure are in accordance with ISO 11784Note 1 to entry: Only
43、 one manufacturer code is granted to the same manufacturer.3.8RA-recognized test centreaccredited test centre meeting the criteria of the registration authority (3.11)3.9RA-registered transpondertransponder (3.13) registered by the registration authority (3.11)3.10reference transpondertransponder (3
44、.13) used to test a transceiver (3.12), selected from the different RA-registered transponder (3.9) types3.11registration authorityRAentity that approves test laboratories and issues and registers manufacturer (3.7) and product codes3.12transceiverdevice used to communicate with the transponder (3.1
45、3)3.13transponderradiofrequency identification (RFID) device that transmits its stored information when activated by a transceiver (3.12) and that may be able to store new informationNote 1 to entry: See ISO 24631-1 for definitions of the main types.2 ISO 2017 All rights reservedBS ISO 246312:2017IS
46、O 24631-2:2017(E)Note 1 to entry: It comprises the reference of the International Standard for which registration is made, the year of issue (4 digits), the type of device tested (“02” for transceivers according to this document) and the running number (3 digits) referencing the transceivers tested
47、successfully during that year.3.3country codethree-digit numeric code representing a country in accordance with ISO 3166-13.4ISO 11784 and ISO 11785 transceivertransceiver (3.12) that reads at least both FDX-B and HDX transponders as defined in ISO 11784 and ISO 117853.5ISO 11784 and ISO 11785 trans
48、ponderradiofrequency identification (RFID) device that transmits its transponder code (3.14) according to ISO 11784 and ISO 11785 when activated by a transceiver (3.12)3.6manufacturercompany that submits an application for testing transceivers (3.12) for conformance with ISO 11784 and ISO 117853.7ma
49、nufacturer codeMFCthree-digit number granted by the RA to a manufacturer (3.6) under the conditions set forth in ISO 24631-1:2017, Annex E, whose range and placement within the code structure are in accordance with ISO 11784Note 1 to entry: Only one manufacturer code is granted to the same manufacturer.3.8RA-recognized test centreaccredited test centre meeting the criteria of the registration authority (3.11)3.9RA-registered transpondertransponder (3.13) registered by the registration authority (3
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1