BS ISO 3860-2011 Bore cutters with key drive Form milling cutters with constant profile《键传动铣刀 有恒定外形的成形铣刀》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 3860:2011Bore cutters with key drive Form milling cutters withconstant profileBS ISO 3860:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementat

2、ion of ISO 3860:2011.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all t

3、he necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 64848 9ICS 25.100.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strate

4、gy Committee on 31 May 2011.Amendments issued since publicationDate Text affectedBS ISO 3860:2011Reference numberISO 3860:2011(E)ISO 2011INTERNATIONAL STANDARD ISO3860Second edition2011-05-01Bore cutters with key drive Form milling cutters with constant profile Fraises alsage lisse entranement par c

5、lavette Fraises de forme profil constant BS ISO 3860:2011ISO 3860:2011(E) COPYRIGHT PROTECTED DOCUMENT ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and

6、 microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii

7、ISO 2011 All rights reservedBS ISO 3860:2011ISO 3860:2011(E) ISO 2011 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried

8、 out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO

9、 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Internation

10、al Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elem

11、ents of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 3860 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 2, High speed steel cutting tools and their attachments. This second editio

12、n cancels and replaces the first edition (ISO 3860:1976), of which it constitutes a minor revision. In particular, the normative references have been updated and the indications of the tolerance classes are given in accordance with ISO 2768-1 and ISO 2768-2. BS ISO 3860:2011BS ISO 3860:2011INTERNATI

13、ONAL STANDARD ISO 3860:2011(E) ISO 2011 All rights reserved 1Bore cutters with key drive Form milling cutters with constant profile 1 Scope This International Standard specifies the dimensions of bore form milling cutters with a constant profile with key drive. This International Standard deals with

14、 the following three types of bore cutters with key drive: convex milling cutters; concave milling cutters; corner-rounding cutters. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies.

15、 For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 240:1994, Milling cutters Interchangeability dimensions for cutter arbors or cutter mandrels ISO 2768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without indi

16、vidual tolerance indications ISO 2768-2, General tolerances Part 2: Geometrical tolerances for features without individual tolerance indications 3 Dimensions 3.1 General All dimensions and tolerances are given in millimetres. Tolerances not specified shall be of tolerance class “m” in accordance wit

17、h ISO 2768-1 and of class “K” in accordance with ISO 2768-2. The interchangeability dimensions of cutters with key drive and arbors shall be in accordance with ISO 240. BS ISO 3860:2011ISO 3860:2011(E) 2 ISO 2011 All rights reserved3.2 Convex milling cutters The dimensions of convex milling cutters

18、shall be in accordance with the dimensions shown in Figure 1 and Table 1. Figure 1 Convex milling cutters Table 1 Dimensions of convex milling cutters d1js16 d2aH7 e r k11 2 1 2,5 1,25 3,2 1,6 50 16 4 2 5 2,5 6,3 (6)b3,15 (3)b8 4 63 22 10 5 12,6 (12)b6,3 (6)b80 27 16 8 20 10 100 25 (24)b12,5 (12)b32

19、 16 125 32 40 20 ad2is in accordance with Clause 2 of ISO 240:1994. bThe values given in parentheses are alternatives. BS ISO 3860:2011ISO 3860:2011(E) ISO 2011 All rights reserved 33.3 Concave milling cutters The dimensions of concave milling cutters shall be in accordance with the dimensions shown

20、 in Figure 2 and Table 2. Figure 2 Concave milling cutters Table 2 Dimensions of concave milling cutters c d1js16 d2aH7 e r N11 1 0,2 6 1,25 8 1,6 0,25 50 16 9 2 10 2,5 0,3 12 3,15 (3)b0,4 16 4 0,5 63 22 20 5 0,6 24 6,3 (6)b0,8 80 27 32 8 1,0 36 10 1,2 100 40 12,5 (12)b1,6 50 16 2,0 125 32 60 20 ad2

21、is in accordance with Clause 2 of ISO 240:1994. bThe values given in parentheses are alternatives. BS ISO 3860:2011ISO 3860:2011(E) 4 ISO 2011 All rights reserved3.4 Corner-rounding cutters The dimensions of corner-rounding cutters shall be in accordance with the dimensions shown in Figure 3 and Tab

22、le 3. Figure 3 Corner-rounding cutters Table 3 Dimensions of corner-rounding cutters c d1js16 d2aH7 e r N11 1 0,2 4 1,25 1,6 0,25 50 16 2 5 2,5 0,3 6 3,15 (3)b0,4 8 4 0,5 63 22 10 5 0,6 12 6,3 (6)b0,8 80 27 16 8 1,0 18 10 1,2 100 20 12,5 (12)b1,6 24 16 2,0 125 32 28 20 ad2is in accordance with Claus

23、e 2 of ISO 240:1994. bThe values given in parentheses are alternatives. BS ISO 3860:2011BS ISO 3860:2011ISO 3860:2011(E) ICS 25.100.20 Price based on 4 pages ISO 2011 All rights reserved This page deliberately left blankBSI is the independent national body responsible for preparing British Standards

24、and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4

25、4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful i

26、f anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating serv

27、ice called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all

28、orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas Br

29、itish Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also avai

30、lable whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contac

31、t Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also h

32、olds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, record

33、ing or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: