BS ISO 4046-1-2016 Paper board pulps and related terms Vocabulary Alphabetical index《纸、纸板、纸浆及其术语 词汇 字顺索引》.pdf

1、BSI Standards PublicationBS ISO 4046-1:2016Paper, board, pulps and relatedterms VocabularyPart 1: Alphabetical indexBS ISO 4046-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 4046-1:2016. It supersedes BS ISO 4046-1:2002 which is withdrawn.The UK partic

2、ipation in its preparation was entrusted to Technical Committee PAI/11, Methods of test for paper, board and pulps.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract

3、. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 92004 2 ICS 01.040.85; 85.020; 85.040; 85.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was pu

4、blished under the authority of the Standards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 4046-1:2016Reference numberNumro de rfrenceISO 4046-1:2016(E/F)ISO 2016INTERNATIONAL STANDARD NORME INTERNATIONALEISO4046-1Seco

5、nd editionDeuxime dition2016-03-01Paper, board, pulps and related terms Vocabulary Part 1: Alphabetical index Papier, carton, ptes et termes connexes Vocabulaire Partie 1: Index alphabtique BS ISO 4046-1:2016ISO 4046-1:2016(E/F) PDF disclaimer This PDF file may contain embedded typefaces. In accorda

6、nce with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes lice

7、nsing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printin

8、g. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. PDF Exonration de responsabilit Le prsent fichier PDF peut contenir des polic

9、es de caractres intgres. Conformment aux conditions de licence dAdobe, ce fichier peut tre imprim ou visualis, mais ne doit pas tre modifi moins que lordinateur employ cet effet ne bnficie dune licence autorisant lutilisation de ces polices et que celles-ci y soient installes. Lors du tlchargement d

10、e ce fichier, les parties concernes acceptent de fait la responsabilit de ne pas enfreindre les conditions de licence dAdobe. Le Secrtariat central de lISO dcline toute responsabilit en la matire. Adobe est une marque dpose dAdobe Systems Incorporated. Les dtails relatifs aux produits logiciels util

11、iss pour la cration du prsent fichier PDF sont disponibles dans la rubrique General Info du fichier; les paramtres de cration PDF ont t optimiss pour limpression. Toutes les mesures ont t prises pour garantir lexploitation de ce fichier par les comits membres de lISO. Dans le cas peu probable o surv

12、iendrait un problme dutilisation, veuillez en informer le Secrtariat central ladresse donne ci-dessous. ISO 2016 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photo

13、copying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne

14、peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie, laffichage sur linternet ou sur un Intranet, sans autorisation crite pralable. Les demandes dautorisation peuvent tre adresses lISO ladresse ci-aprs ou au comit membre

15、de lISO dans le pays du demandeur. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland/Publi en Suisse ii ISO 2016 All rights reserved/Tous droits rservsBS ISO 4046-1:2016ISO 4046-1:2016(

16、E/F) ISO 2016 All rights reserved/Tous droits rservs iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees

17、. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Intern

18、ational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare International Standards. Draft International Sta

19、ndards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 4046 may be

20、the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 4046-1 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps. ISO 4046-1, ISO 4046-2, ISO 4046-3, ISO 4046-4 and ISO 4046-5 cancel and replace ISO 4046:1978. Many new ter

21、ms have been defined in this new series of standards since ISO 4046:1978 was published. However, the ISO 4046 series is not intended to be a comprehensive list of all terms related to paper, board and pulps. It includes definitions of relevant terms which can be found in ISO standards prepared by IS

22、O Technical Committee 6, as well as other definitions which, in the opinion of Working Group 6, needed to be standardized. ISO 4046 consists of the following parts under the general title Paper, board, pulps and related terms Vocabulary: Part 1: Alphabetical index Part 2: Pulping terminology Part 3:

23、 Paper-making terminology Part 4: Paper and board grades and converted products Part 5: Properties of pulp, paper and board This second edition results from the reinstatement of the previous edition (ISO 4046-1:2002) which was withdrawn in 2014. BS ISO 4046-1:2016ISO 4046-1:2016(E/F) iv ISO 2016 All

24、 rights reserved/Tous droits rservsAvant-propos LISO (Organisation internationale de normalisation) est une fdration mondiale dorganismes nationaux de normalisation (comits membres de lISO). Llaboration des Normes internationales est en gnral confie aux comits techniques de lISO. Chaque comit membre

25、 intress par une tude a le droit de faire partie du comit technique cr cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec lISO, participent galement aux travaux. LISO collabore troitement avec la Commission lectrotechnique internationale (CEI) en

26、ce qui concerne la normalisation lectrotechnique. Les Normes internationales sont rdiges conformment aux rgles donnes dans les Directives ISO/CEI, Partie 3. La tche principale des comits techniques est dlaborer les Normes internationales. Les projets de Normes internationales adopts par les comits t

27、echniques sont soumis aux comits membres pour vote. Leur publication comme Normes internationales requiert lapprobation de 75 % au moins des comits membres votants. Lattention est appele sur le fait que certains des lments de la prsente partie de lISO 4046 peuvent faire lobjet de droits de proprit i

28、ntellectuelle ou de droits analogues. LISO ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et averti de leur existence. LISO 4046-1 a t labor par le comit technique ISO/TC 6, Papiers, cartons et ptes. LISO 4046-1, lISO 4046-2, lISO 4046-3, lISO 4046-4 et lISO

29、 4046-5 annulent et remplacent lISO 4046:1978. De nombreux nouveaux termes ont t dfinis dans cette nouvelle srie de normes depuis la publication de lISO 4046:1978. Cependant, la srie de normes ISO 4046 ne constitue pas une liste complte des termes relatifs aux papiers, cartons et ptes. Elle inclut l

30、es dfinitions de termes qui se trouvent dans les normes ISO prpares par le comit technique 6 de lISO, ainsi que celles dautres termes qui, selon le groupe de travail 6, devaient tre normaliss. LISO 4046 comprend les parties suivantes, prsentes sous le titre gnral Papier, carton, ptes et termes conne

31、xes Vocabulaire: Partie 1: Index alphabtique Partie 2: Terminologie de la fabrication de la pte Partie 3: Terminologie de la fabrication du papier Partie 4: Catgories et produits transforms de papier et de carton Partie 5: Proprits de la pte, du papier et du carton Cette deuxime dition rsulte du rta

32、blissement de ldition prcdente (ISO 4046-1:2002) qui avait t supprime en 2014. BS ISO 4046-1:2016ISO 4046-1:2016(E/F) ISO 2016 All rights reserved/Tous droits rservs vIntroduction Entry items in this part of ISO 4046 are numbered X.Y, where “X” indicates that the term is located in ISO 4046-X, and “

33、Y” is the entry number in that part. For example, the term numbered 2.23 is the 23rd term found in ISO 4046-2. This part of ISO 4046 was prepared by Working Group 6 of Technical Committee 6 (ISO/TC 6/WG 6). This Working Group is concerned with terminology related to paper, board and pulps. BS ISO 40

34、46-1:2016ISO 4046-1:2016(E/F) vi ISO 2016 All rights reserved/Tous droits rservsIntroduction Les articles de la prsente partie de lISO 4046 sont numrots X.Y, o X indique que larticle fait partie de la norme ISO 4046-X, et Y est le numro de larticle de cette partie. Par exemple, le terme numrot 2.23

35、est le 23meterme de lISO 4046-2. La prsente partie de lISO 4046 a t prpare par le groupe de travail 6 du comit technique 6 (ISO/TC 6/WG 6). Ce groupe de travail sintresse la terminologie relative aux papiers, cartons et ptes. BS ISO 4046-1:2016INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 4046-1:2

36、016(E/F) ISO 2016 All rights reserved/Tous droits rservs 1Paper, board, pulps and related terms Vocabulary Part 1: Alphabetical index Papier, carton, ptes et termes connexes Vocabulaire Partie 1: Index alphabtique 1 Scope This part of ISO 4046 is an alphabetical index ofEnglish and French terms whic

37、h are defined in the ISO 4046 series of standards, which document theterminology of paper, board, pulp and related terms. 2 Domaine dapplication La prsente partie de lISO 4046 est un index alphabtique des termes anglais et franais dfinis dans la srie de normes ISO 4046, qui documente la terminologie

38、 du papier, du carton, des ptes et des termes connexes. BS ISO 4046-1:2016ISO 4046-1:2016(E/F) 2 ISO 2016 All rights reserved/Tous droits rservsEnglish alphabetical index h “A“ A absorbency 5.1 accept 3.1 accepted stock 3.2 acid sizing 3.3 acid-free paper 4.1 acid-insoluble ash 5.2 additive 3.4 agei

39、ng 5.3 air permeance 5.4 air-dry mass 2.1 air-dry pulp 2.2 air-drying 3.7 air-jet coating 3.5, 3.6 air-knife coated paper or board 4.2 air-knife coating 3.6 alkali reserve 5.5 alkali resistance 5.6 alkali solubility 5.7 alkaline sizing 3.8 all-rag paper 4.3 alum 3.9 ammunition cartridge 4.4 angle cu

40、tting 3.10 anti-rust paper 4.5 anti-tarnish paper 4.6 apparent bulk density 5.8 apparent sheet density 5.9 archival paper 4.7 art paper 4.8 asbestos board 4.9 ash content 5.10, 5.95 ashless paper 4.10 authorized laboratory 5.11 B bagasse pulp 2.3 bamboo pulp 2.4 banknote paper 4.11 base paper for di

41、azotype 4.12 base paper or board 4.13 BCTMP 2.5, 2.7 beater 3.11 beating 3.12 bending angle 5.12 bending length 5.13 bending stiffness 5.14 bible paper 4.14 black 5.15 black body 5.16 black liquor 2.6 blackening 5.17 blade coating 3.13 blade-coated paper 4.15 bleached chemi-thermomechanical pulp 2.7

42、 bleached lined folding boxboard 4.16 bleached pulp 2.8 bleaching 2.9 blister 3.14 blotting paper 4.17 blow 3.15 blue reflectance factor 5.18 board 3.16 board for forming 4.18 body paper or board 4.13, 4.19 bond paper 4.20 bookbinding board 4.21 breaker 3.17 breaker beater 3.17, 3.18 breaking length

43、 5.19 break-through of grease 5.20 brightness 5.21 brightness (deprecated) 5.39 broke 3.19 brown mechanical pulp 2.10 brown mechanical pulp board 4.22 brown mixed pulp board 4.23 brush coating 3.20 brush-coated paper 4.24 bubble-coated paper 4.25 bulk 5.22 bulking thickness 5.23 burst index 5.24 bur

44、sting strength 5.25 C calender 3.21 calender-bowl paper 4.26, 4.27 calendered paper or board 4.28 calendering 3.22 calender-roll paper 4.27 caliper 5.26, 5.119 capacitor tissue paper 4.29 capillary rise 5.27 carbon paper 4.30 carbonized form 4.31 carbonizing base paper 4.32 carbonless copy paper 4.3

45、3 carbonless copy-paper forms 4.34 carton board 4.35, 4.75 cast-coated paper or board 4.36 caustic carbonate semi-chemical pulp 2.11 CD 3.23, 3.35 cellulose wadding 4.37 chemical pulp 2.12 chemical recovery 2.13 chemi-mechanical pulp 2.14 chemi-thermomechanical pulp 2.15 chip refining 2.16 chipboard

46、 4.38 chlorine consumption of pulp 5.28 cigarette paper 4.39 clay slip 3.24 cloth-centred paper or board 4.40 cloth-lined paper or board 4.41 BS ISO 4046-1:2016ISO 4046-1:2016(E/F) ISO 2016 All rights reserved/Tous droits rservs 3CMP 2.14, 2.17 coated folding boxboard 4.42 coated paper 4.43 coating

47、3.25 coating colour 3.26, 3.27 coating slip 3.27 Cobb value 5.29, 5.126 cockle 5.30 cockle finish 3.28 cockle-finished paper 4.44 cold-soda pulp 2.18 colour stripping 2.19 competent technical group 5.31 composition 3.29 compression index 5.32 compressive strength 5.33 condenser paper 4.29, 4.45 cond

48、itioning of paper or board 5.34 constant mass 5.35 contrary 2.20 contrary (1) 3.30 contrary (2) 3.31 converting 3.32 cooking 2.21 copy paper 4.46 correspondence envelope 4.47 correspondence pocket 4.47, 4.48 corrugated fibreboard 4.49 corrugating medium 4.50, 4.73 corrugating paper or board 4.51, 4.74 couch 3.33 crpe paper 4.52 crping 3.34 cross-direction 3.35 crushing (1) 3.36 crushing (2) 3.37 CTMP 2.15,