BS ISO 4168-2002 Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits《计时仪表 对辐射发光沉积物进行检验的条件》.pdf

1、BRITISH STANDARD BS ISO 4168:2002 Timekeeping instruments Conditions for carrying out checks on radioluminescent deposits ICS 39.040.01 BS ISO 4168:2002 This British Standard, having been prepared under the direction of the Materials and Chemicals Sector Policy and Strategy Committee, was published

2、under the authority of the Standards Policy and Strategy Committee on 1 August 2002 BSI 1 August 2002 ISBN 0 580 40175 8 National foreword This British Standard reproduces verbatim ISO 4168:2002 and implements it as the UK national standard. The UK participation in its preparation was entrusted to T

3、echnical Committee STI/53, Jewellery, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the

4、 BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible f

5、or their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK

6、interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 3 and a back cover. The BSI copyright date displaye

7、d in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsINTERNATIONAL STANDARD ISO 4168 Second edition 2002-05-01 Reference number ISO 4168:2002(E) Timekeeping instruments Conditions for carrying out checks on radioluminescent deposit

8、s Instruments horaires Conditions dexcution des contrles des dpts radioluminescentsBSISO4168:2002 ii BSISO4168:2002 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International St

9、andards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also

10、 take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopte

11、d by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the sub

12、ject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 4168 was prepared by Technical Committee ISO/TC 114, Horology, Subcommittee SC 5, Luminescence. This second edition cancels and replaces the first edition (ISO 4168:1979

13、), which has been technically revised. BSISO4168:2002 1 Timekeeping instruments Conditions for carrying out checks on radioluminescent deposits 1 Scope This International Standard specifies the conditions in which checks on radioluminescent deposits for timekeeping instruments are to be carried out.

14、 It supplements ISO3157, in particular clause4 of that document, “Specifications and test methods for radioluminescent deposits”. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. F

15、or dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. F

16、or undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 2859-1:1999, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limi

17、t (AQL) for lot-by-lot inspection ISO 3157:1991, Radioluminescence for time measurement instruments Specifications 3 Terms and definitions For the purposes of this International Standard, the following terms and definitions apply. 3.1 user anyone who handles and applies the radioluminescent substanc

18、e NOTE The term “poseur” is widely used in Switzerland. 3.2 new support any part (hand, dial, bezel) which, owing to the nature of the materials and the treatments of the surface, is outside the previous experience of the user of the radioluminescent substance 3.3 new deposit any deposit of radiolum

19、inescent substance which, owing to its shape or dimensions, is outside the previous experience of the user of the radioluminescent substance BSISO4168:2002 2 4 Carrying out checks 4.1 General All radioluminescent deposits shall be capable of successfully withstanding the tests specified in clause 4

20、of ISO 3157:1991 carried out in the following conditions. 4.2 Checking of the colours, the specific luminous intensity and resistance to ageing The colours, the specific luminous intensity and the resistance to ageing shall be checked on five standard deposits as defined in 4.1 c) of ISO 3157:1991,

21、for each production batch of radioluminescent substance and each time the nature of the binder is altered. These checks are the responsibility of the manufacturer of the radioluminescent substance. If a user applies the radioluminescent substance in conditions which differ from those defined by the

22、manufacturer of this substance (proportion and nature of the binder), the checks are the responsibility of such a user. 4.3 Checking of adhesion 4.3.1 The adhesion shall be checked as follows. 4.3.2 Check each production batch of radioluminescent substance and each production batch of binder, on fiv

23、e standard supports. These checks are the responsibility of the manufacturer of the radioluminescent substance. 4.3.3 Check each new support or new deposit which has not undergone testing by the user concerned, on at least five pieces. These checks are the responsibility of the user of the radiolumi

24、nescent substance. 4.3.4 Check each production batch of dials or hands or any part bearing a radioluminescent deposit, on a representative sample ensuring an acceptable quality level (AQL) of , in accordance with the standard inspection conditions specified in ISO 2859-1. These checks are the respon

25、sibility of the user of the radioluminescent substance. 4.4 Checking of the insolubility 4.4.1 The insolubility shall be checked as follows. 4.4.2 Check each production batch of radioluminescent substance and each production batch of binder, on the standard supports used for the checking of adhesion

26、 as defined in 4.3.2. These checks are the responsibility of the manufacturer of the radioluminescent substance. 4.4.3 Check on the new supports which were used for the checking of adhesion as defined in 4.3.3 when the new element concerns the support material or the surface treatment of the support

27、. These supports are the responsibility of the user of the radioluminescent substance. 1% BSISO4168:2002 3 5 Certificate of conformity 5.1 The manufacturer of the radioluminescent substance shall be required, at the request of the customer, to furnish a certificate with each delivery, indicating the

28、 production batch numbers, and stating the characteristics defined in 4.2 and 4.3 of ISO 3157:1991 for one or more types of binder and for one or more proportions of mixture, and conformity of the product with the specifications in 4.4, 4.5 and 4.6 of ISO 3157:1991. 5.2 The user of the radioluminesc

29、ent substance shall be required, at the request of the customer, to furnish a certificate with each delivery of hands or dials, guaranteeing, firstly, use of a radioluminescent substance complying with the specifications of ISO 3157 and, secondly, conformity with the specifications in 4.5 and 4.6 of

30、 ISO 3157:1991. 5.3 Both the manufacturer and the user of the radioluminescent substance shall be required, with due regard to national regulations applying to prescribed time limits, to file the reports on checks carried out on their production, as well as the duplicate copies of certificates accom

31、panying deliveries, and to produce them on demand. BSISO4168:2002 BS ISO 4168:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the in

32、ternational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services

33、. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers member

34、s an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20

35、 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on

36、standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Inform

37、ation Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administratio

38、n. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subs

39、ists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by an

40、y means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.