BS ISO 4261-2013 Petroleum products Fuels (class F) Specifications of gas turbine fuels for industrial and marine applications《石油产品 燃料(F类) 工业和海洋应用燃气涡轮燃料规范》.pdf

1、BSI Standards PublicationBS ISO 4261:2013Petroleum products Fuels(class F) Specifications of gasturbine fuels for industrial andmarine applicationsBS ISO 4261:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 4261:2013. The UK participation in its preparatio

2、n was entrusted to TechnicalCommittee PTI/7, Lubricants and process fluids.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

3、application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 78543 6 ICS 75.160.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy

4、 Committee on 30 September 2013.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 4261:2013 ISO 2013Petroleum products Fuels (class F) Specifications of gas turbine fuels for industrial and marine applicationsProduits ptroliers Combustibles (classe F) Spcifications des

5、 combustibles pour turbines gaz en service dans lindustrie et la marineINTERNATIONAL STANDARDISO4261Second edition2013-09-01Reference numberISO 4261:2013(E)BS ISO 4261:2013ISO 4261:2013(E)ii ISO 2013 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2013All rights reserved. Unless otherwise specif

6、ied, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO

7、s member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 4261:2013ISO 4261:2013(E) ISO 2013 All rights reserved iiiContents PageForeword iv1 Scope

8、 . 12 Normative references 13 General requirements . 24 Detailed requirements . 25 Sampling 26 Precision and interpretation of test results . 2Annex A (normative) Method of calculation of specific energy 5Annex B (informative) Trace metal limits of fuel entering turbine combustion chambers 7Annex C

9、(informative) Significance of specifications for gas turbine fuels .10Bibliography .17BS ISO 4261:2013ISO 4261:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Stand

10、ards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also ta

11、ke part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In pa

12、rticular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this

13、document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.or

14、g/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement.The committee responsible for this document is ISO/TC 28, Petroleum products and lubricants, Subcommittee SC 4, Classifications and specifications, WG 5, Gas turbine

15、 fuels.This second edition cancels and replaces the first edition (ISO 4261:1993), of which it constitutes a minor revision with the following changes: Reference to ISO 4260 has been removed; Reference to ISO 4262 has been removed; Reference is made to ISO 10370.Annex A forms an integral part of thi

16、s International Standard. Annex B and C are for information only.iv ISO 2013 All rights reservedBS ISO 4261:2013INTERNATIONAL STANDARD ISO 4261:2013(E)Petroleum products Fuels (class F) Specifications of gas turbine fuels for industrial and marine applicationsWARNING The use of this International St

17、andard may involve hazardous materials, operations, and equipment. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and

18、determine the applicability of regulatory limitations prior to use.1 ScopeThis International Standard specifies the requirements for petroleum fuels for gas turbines (see ISO 3977) used in public utility, industrial, and marine applications. It does not cover requirements for gas turbine fuels for a

19、viation use. This International Standard is intended for the guidance of users such as turbine manufacturers, suppliers, and purchasers of gas turbine fuels.This International Standard sets out the properties of fuels at the time and place of transfer of custody to the user. Further information and

20、recommendations for the quality of the fuel entering the turbine combustion chambers are provided in Annex B.The terminology used and the test methods referred to in these specifications are presented in Annex C.NOTE 1 Additional information on fuels for gas turbines is given in ISO 3977.NOTE 2 The

21、requirements for petroleum fuels for diesel engines and steam turbines for marine use are given in ISO 8217.The fuel categories in this International Standard have been classified in accordance with ISO 8216-2:1986.2 Normative referencesThe following documents, in whole or in part, are normatively r

22、eferenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 2160, Petroleum products Corrosiveness to copper Copper strip testI

23、SO 2719, Determination of flash point Pensky-Martens closed cup methodISO 3104, Petroleum products Transparent and opaque liquids Determination of kinematic viscosity and calculation of dynamic viscosityISO 3170, Petroleum liquids Manual samplingISO 3171, Petroleum liquids Automatic pipeline samplin

24、gISO 3405, Petroleum products Determination of distillation characteristics at atmospheric pressureISO 3675, Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer methodISO 3733, Petroleum products and bituminous materials Determination of water Distillation me

25、thodISO 3735, Crude petroleum and fuel oils Determination of sediment Extraction methodISO 4259, Petroleum products Determination and application of precision data in relation to methods of test ISO 2013 All rights reserved 1BS ISO 4261:2013ISO 4261:2013(E)ISO 6245, Petroleum products Determination

26、of ashISO 8217, Petroleum products Fuels (class F) Specifications of marine fuelsISO 8754, Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometryISO 10370, Petroleum products Determination of carbon residue Micro method3 General requirements3.1 The fuel

27、shall be a homogeneous mixture of hydrocarbons, free from inorganic acids and adventitious foreign matter.NOTE Guidelines for limits for trace metals for fuels entering the turbine combustion chambers are contained in Annex A.3.2 Fuels of all categories shall remain homogeneous during storage and ha

28、ndling in the countries or locality where the fuel is to be used, taking into account local storage conditions, handling, and duration of storage.4 Detailed requirementsNOTE The properties listed in this specification are those which permit acceptable performance of the turbine. However, certain met

29、als, even in trace quantities, are detrimental to gas turbine service life. Information on the significance and concentration of critical metallic elements in the fuel as it enters the turbine combustion chambers is provided in Annex B.4.1 The various categories of gas turbine fuels shall conform to

30、 the limiting requirements shown in Table 1 when the fuel is tested by the methods specified.4.2 Incorporation of additives by the fuel supplier for legal purposes or to improve certain aspects of performance is permitted, provided that the amount and type incorporated do not cause the additive-trea

31、ted fuel properties to fall outside the general requirements and specification limits laid down in Table 1.NOTE Additives may also be introduced subsequent to delivery, as noted in Annex C.4.3 A limit for low-temperature operability is a requirement of this International Standard, but limits cannot

32、be included in Table 1 because of the need to conform to local or national requirements. When this specification is called up, such limits, together with the test methods required, shall be stated.Information on internationally available test methods for low-temperature operability is given in Annex

33、 C (C.2.5).5 SamplingSampling for the requirements in Table 1 shall be carried out by the methods described in ISO 3170, ISO 3171, or equivalent International Standards.NOTE If sampling for trace metals is agreed upon by the interested parties, the recommendations in Annex B should be followed.6 Pre

34、cision and interpretation of test resultsThe majority of test methods specified in Table 1 contain a statement of the precision (repeatability and reproducibility) to be expected from it. Attention is drawn to ISO 4259, which covers the use of precision data in the interpretation of test results; th

35、is procedure shall be used in cases of dispute.2 ISO 2013 All rights reservedBS ISO 4261:2013ISO 4261:2013(E)Table 1 Detailed requirements for gas turbine fuels at time and place of custody transfer to userPropertyTest methodISO-F CategoryaDST.0 DST.1/ DMT.1DST.2/ DMT.2DST.3/ DMT.3RST.3/ RMT.3RST.4/

36、 RMT.4Low flash point petro-leum distillate (naphtha type)Medium flash point petroleum distillate (jet fuel kerosine type)Petro-leum distil-late (gas-oil type)Low ash petroleum distillateLow ash residual fuel or a distillate fuel containing heavy compo-nents from petroleum processingPetroleum fuel c

37、ontaining heavy components from petroleum processingFlash point, C, min. ISO 2719binland: 38 marine: 43cinland: 56 marine: 60inland: 56 marine: 6060 60Kinematic viscosity at 40 C to 100 C, in mm2/s, max.ISO 3104 1,3 min.d1,3 to 2,4d1,3 to 5,5 1,3 to 11,0 1,3 to 20,0 55 (see C.2.2)Density at 15 C in

38、kg/m2, max.eISO 3675 Value to be reportedValue to be reported880 900 (see B.5)920 (see B.5)996 (see B.5)Distillation 90 % ( V/ V ) recovered at C, max.ISO 3405 288 288 365 Low-temperature operability, CSee 4.3 Value to be reportedValue to be reportedValue to be reportedValue to be reportedValue to b

39、e reportedValue to be reportedCarbon residue % (m/m), max.ISO 10370 0,15 (on 10 % residue)0,15 (on 10 % residue)0,15 (on 10 % residue)0,25 1,50 Value to be reportedfAsh content % (m/m), max.ISO 6245 0,01 0,01 0,01 0,01 0,03 0,15Water % (V/V), max. ISO 3733 0,05 0,05 0,05 0,30 0,50 1,0a Crude oils, b

40、ecause of their varied properties, do not necessarily fit any category designation. If crude oil is considered as a turbine fuel for industrial applications, the manner of its use should be agreed between the turbine manufacturer and user.b Other methods may be required by law for the determination

41、of minimum flash point.c In marine applications, this category is for use in engines for emergency purposes and shall conform to the requirements of ISO 8217.d Fuel with a viscosity below the minimum value of 1,3 mm2/s at 40 C may be substituted by agreement with the turbine manufacturer.e Density m

42、easured at 15 C, in kilogram per litre or in units of similar magnitude, shall be multiplied by 1 000 before comparison with these values.f An assessment of the significance of carbon residue for RST.4/RMT.4 is given in C.2.6.g Gas turbines with waste heat recovery equipment may require additional s

43、ulfur control to prevent cold end corrosion (see C.2.9). ISO 2013 All rights reserved 3BS ISO 4261:2013ISO 4261:2013(E)PropertyTest methodISO-F CategoryaDST.0 DST.1/ DMT.1DST.2/ DMT.2DST.3/ DMT.3RST.3/ RMT.3RST.4/ RMT.4Low flash point petro-leum distillate (naphtha type)Medium flash point petroleum

44、distillate (jet fuel kerosine type)Petro-leum distil-late (gas-oil type)Low ash petroleum distillateLow ash residual fuel or a distillate fuel containing heavy compo-nents from petroleum processingPetroleum fuel containing heavy components from petroleum processingSediment % (m/m), max. ISO 3735 0,0

45、1 0,01 0,01 0,05 0,05 0,25Sulfur % (m/m), max.gISO 8754 0,5 0,5 1,3 2,0 2,0 4,5Copper corrosion clas-sification, max.ISO 2160 1 1 1 Calculated net specific energy in MJ/kg, min. (lower calorific value)See Annex AValue to be reported42,8 41,6 40,0 40,0 39,4a Crude oils, because of their varied proper

46、ties, do not necessarily fit any category designation. If crude oil is considered as a turbine fuel for industrial applications, the manner of its use should be agreed between the turbine manufacturer and user.b Other methods may be required by law for the determination of minimum flash point.c In m

47、arine applications, this category is for use in engines for emergency purposes and shall conform to the requirements of ISO 8217.d Fuel with a viscosity below the minimum value of 1,3 mm2/s at 40 C may be substituted by agreement with the turbine manufacturer.e Density measured at 15 C, in kilogram

48、per litre or in units of similar magnitude, shall be multiplied by 1 000 before comparison with these values.f An assessment of the significance of carbon residue for RST.4/RMT.4 is given in C.2.6.g Gas turbines with waste heat recovery equipment may require additional sulfur control to prevent cold

49、 end corrosion (see C.2.9).Table 1 (continued)4 ISO 2013 All rights reservedBS ISO 4261:2013ISO 4261:2013(E)Annex A (normative) Method of calculation of specific energyA.1 Specific energy (lower calorific value) is controlled indirectly by the specification of other properties. Specific energy shall be calculated with a degree of accuracy accept-able for normal purposes from the density of the fuel, applying corrections as follows for any sulfur, water, and incombust