BS ISO 4926-2007 Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids《道路车辆 液压制动系统 非石油基基准液》.pdf

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Non-petroleum-base reference fluidsICS 43.040.40; 75.120Road vehicles Hydraulic braking systems BRI

2、TISH STANDARDBS ISO 4926:2006BS ISO 4926:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 March 2007 BSI 2007ISBN 978 0 580 50317 7Amendments issued since publicationAmd. No. Date Commentscontract. Users are responsible for its correct

3、application.Compliance with a British Standard cannot confer immunity from legal obligations. National forewordThis British Standard was published by BSI. It is the UK implementation of ISO 4926:2006. It supersedes BS AU174-1:1979 which is withdrawn.The UK participation in its preparation was entrus

4、ted to Technical Committee PRI/69, Components and fluids for vehicle braking systems.A list of organizations represented on PRI/69 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a Reference numberISO 4926:2006(E)INTERNATIONAL

5、STANDARD ISO4926Second edition2006-11-01Road vehicles Hydraulic braking systems Non-petroleum-base reference fluids Vhicules routiers Systmes de freinage hydrauliques Liquides de rfrence base non ptrolire BS ISO 4926:2006ii iiiForeword ISO (the International Organization for Standardization) is a wo

6、rldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented o

7、n that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted

8、 in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standa

9、rd requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 4926 was prepared by T

10、echnical Committee ISO/TC 22, Road vehicles, Subcommittee SC 2, Braking systems and equipment. This second edition cancels and replaces the first edition (ISO 4926:1978), which has been technically revised. BS ISO 4926:2006blank1Road vehicles Hydraulic braking systems Non-petroleum-base reference fl

11、uids 1 Scope This International Standard specifies the composition and characteristics of a reference fluid used for the compatibility testing of hydraulic braking systems and components mounted on road vehicles. 2 Normative references The following referenced documents are indispensable for the app

12、lication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 4925, Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems 3 ISO brake fluid

13、for compatibility testing The composition of the reference brake fluid is specified in Table 1. The fluid shall comply with the specifications of ISO 4925. Table 1 Composition of the reference brake fluid Components Mass fraction % PurityaTriethylene glycol 19,40 W 95 % Triethylene glycol monomethyl

14、 ether 25,00 W 95 % Polyethylene glycol monobutyl ethers 35,80 Diethylene glycol monobutyl ether u 2 % Triethylene glycol monobutyl ether 60 % u purity u 80 % Tetraethylene glycol + higher glycol monobutyl ethers 20 % u purity u 40 % Borate of triethylene glycol monomethyl ether 18,60 Content of bor

15、ic acid 11,2 % to 11,5 % Diisopropanolamine 0,85 W 98 % Dibutylamine 0,10 W 99 % Bisphenol A 0,20 W 97 % Tolyltriazole 0,025 W 98 % Benzotriazole 0,025 W 98 % aThe water content of the reference fluid shall be less than or equal to 0,20 %. BS ISO 4926:20062 4 ISO fluid for storage corrosion test The

16、 fluid for the storage corrosion test shall be subject to an agreement between the customer and the supplier until a new reference fluid has been proposed for the next revision of this International Standard. BS ISO 4926:2006blankBS ISO BSI389 Chiswick High RoadLondonW4 4AL4926:2006BSI British Stand

17、ards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Stand

18、ards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical

19、 committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standard

20、sOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards

21、, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Expo

22、rters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards develop

23、ments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standa

24、rds Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under t

25、he Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementi

26、ng the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.