BS ISO 5433-2013 Leather Bovine wet blue Specification《皮革 湿铬鞣革牛皮 规格》.pdf

1、BSI Standards PublicationBS ISO 5433:2013Leather Bovine wet blue SpecificationBS ISO 5433:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 5433:2013. It supersedes BS ISO 5433:1999 which is withdrawn.It is considered the view of the UK committee that the ap

2、plication of this standard to bovine wet blue can be limiting on three counts:1. The requirement for a water extract pH value of greater than 3.5 isconsidered restrictive as tanners are producing high quality bovine wetblue with water extract values of less than 3.5, such as a pH value 3.2.2. It sta

3、tes that a 3.5 % chrome content is required to achieve a 100 C shrinkage temperature. However, this shrinkage temperature is being commercially achieved at a chrome content of 3 %.3. At the request of their customers, tanners are not placing trade namesor names and addresses of the manufacturer on t

4、heir packaging. Thelabelling requirements of the standard do not reflect the commercialrealities that tanners operate within and would require the tanner andcustomer to disclose this information without any perceived benefit.It is acknowledged by the UK committee that this standard can be applied fo

5、r UK commercial transactions and aspects can be used in case of dispute between parties but all parties should be aware of the limitations detailed above for bovine wet blue production.The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear, leather and coated f

6、abrics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BS

7、I Standards Limited 2013ISBN 978 0 580 80571 4ICS 59.140.30 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2013.Amendments/corrigenda issued since

8、publicationDate Text affectedBS ISO 5433:2013 ISO 2013Leather Bovine wet blue SpecificationCuir Peaux de bovins ltat “bleu humide” SpcificationsINTERNATIONALSTANDARDISO5433Second edition2013-08-15Reference numberISO 5433:2013(E)BS ISO 5433:2013 ISO 2013Leather Bovine wet blue SpecificationCuir Peaux

9、 de bovins ltat “bleu humide” SpcificationsINTERNATIONAL STANDARDISO5433Second edition2013-08-15Reference numberISO 5433:2013(E)BS ISO 5433:2013ISO 5433:2013(E)ii ISO 2013 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2013All rights reserved. Unless otherwise specified, no part of this publica

10、tion may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country

11、 of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 5433:2013ISO 5433:2013(E) ISO 2013 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 1

12、3 Terms and definitions . 14 Requirements 24.1 Raw material . 24.2 Form and trimming . 24.3 Tanning 24.4 Fungicidal additives 24.5 Presentation 34.6 Shrinkage temperature 34.7 Chemical requirements 35 Sampling 35.1 Sampling for routine testing 35.2 Sampling in case of dispute 35.3 Preparation of sam

13、ples 46 Method of test 46.1 Visual tests 46.2 Shrinkage temperature 46.3 Volatile matter . 46.4 pH of the water extract 46.5 Effectiveness of the fungicide . 47 Packaging and marking . 47.1 Packaging . 47.2 Marking . 4BS ISO 5433:2013ISO 5433:2013(E)ii ISO 2013 All rights reservedCOPYRIGHT PROTECTED

14、 DOCUMENT ISO 2013All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permissio

15、n can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 5433:2013ISO 5433:2013(E) I

16、SO 2013 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Requirements 24.1 Raw material . 24.2 Form and trimming . 24.3 Tanning 24.4 Fungicidal additives 24.5 Presentation 34.6 Shrinkage temperature 34.7 Chemical requirements 35 Sampling

17、35.1 Sampling for routine testing 35.2 Sampling in case of dispute 35.3 Preparation of samples 46 Method of test 46.1 Visual tests 46.2 Shrinkage temperature 46.3 Volatile matter . 46.4 pH of the water extract 46.5 Effectiveness of the fungicide . 47 Packaging and marking . 47.1 Packaging . 47.2 Mar

18、king . 4BS ISO 5433:2013ISO 5433:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member bod

19、y interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrote

20、chnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO

21、 documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsibl

22、e for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patentsAny trade name used in this document is information given for the con

23、venience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Forewo

24、rd - Supplementary informationThe committee responsible for this document is ISO/TC 120, Leather, Subcommittee SC 2, Tanned leather.This second edition cancels and replaces the first edition (ISO 5433:1999), which has been technically revised.iv ISO 2013 All rights reservedBS ISO 5433:2013INTERNATIO

25、NAL STANDARD ISO 5433:2013(E)Leather Bovine wet blue Specification1 ScopeThis International Standard specifies requirements, methods of sampling and methods of test for wet blue leather produced from bovine hides and parts of bovine hides tanned without hair and with the use of basic chromium sulfat

26、e as the primary tanning agent.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

27、 document (including any amendments) applies.ISO 2418, Leather Chemical, physical and mechanical and fastness tests Sampling locationISO 3380, Leather Physical and mechanical tests Determination of shrinkage temperature up to 100 CISO 4045, Leather Chemical tests Determination of pHISO 4684, Leather

28、 Chemical tests Determination of volatile matterISO 5398-1, Leather Chemical determination of chromic oxide content Part 1: Quantification by titrationASTM D4576, Standard test method for mold growth resistance of wet blue3 Terms and definitionsFor the purposes of this document, the following terms

29、and definitions apply.3.1curedpreserved temporarily from putrefaction until it can be tannedNote 1 to entry: Any method of curing, including wet or dry salting or drying, is included.3.2pigmentationcolouration produced by fungi growing on wet blue chrome leatherNote 1 to entry: The colouration produ

30、ced by fungi will normally be black, white, green or yellow but can also be pink or violet.3.3bellythe part of the hide covering the underside and part of the legs of the animal3.4dossetdouble back part of the hide remaining after the belly has been removed3.5shoulderfore part of the hide covering t

31、he shoulders and the neck of the animal, with or without the head ISO 2013 All rights reserved 1BS ISO 5433:2013ISO 5433:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internati

32、onal Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with IS

33、O, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Par

34、t 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the element

35、s of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received.

36、www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to th

37、e WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 120, Leather, Subcommittee SC 2, Tanned leather.This second edition cancels and replaces the first edition (ISO 5433:1999), whic

38、h has been technically revised.iv ISO 2013 All rights reservedBS ISO 5433:2013INTERNATIONAL STANDARD ISO 5433:2013(E)Leather Bovine wet blue Specification1 ScopeThis International Standard specifies requirements, methods of sampling and methods of test for wet blue leather produced from bovine hides

39、 and parts of bovine hides tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only

40、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 2418, Leather Chemical, physical and mechanical and fastness tests Sampling locationISO 3380, Leather Physical and mechanical tests Determination of shrinkage temp

41、erature up to 100 CISO 4045, Leather Chemical tests Determination of pHISO 4684, Leather Chemical tests Determination of volatile matterISO 5398-1, Leather Chemical determination of chromic oxide content Part 1: Quantification by titrationASTM D4576, Standard test method for mold growth resistance o

42、f wet blue3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1curedpreserved temporarily from putrefaction until it can be tannedNote 1 to entry: Any method of curing, including wet or dry salting or drying, is included.3.2pigmentationcolouration pr

43、oduced by fungi growing on wet blue chrome leatherNote 1 to entry: The colouration produced by fungi will normally be black, white, green or yellow but can also be pink or violet.3.3bellythe part of the hide covering the underside and part of the legs of the animal3.4dossetdouble back part of the hi

44、de remaining after the belly has been removed3.5shoulderfore part of the hide covering the shoulders and the neck of the animal, with or without the head ISO 2013 All rights reserved 1BS ISO 5433:2013ISO 5433:2013(E)3.6buttthe part of the hide remaining after the belly and the shoulder have been rem

45、oved3.7sidehalf a whole hide with offal (head, shoulder and belly) attached, obtained by dividing it along the line of the backbone3.8culattarear part of the bovine hide, comprising the butt, the belly middles and the hind shanks3.9frontfore part of the bovine hide, consisting of the shoulders and f

46、ore shanks4 Requirements4.1 Raw materialBovine wet blue hides shall be processed from cured or fresh hides or part hides.4.2 Form and trimming4.2.1 Bovine wet blue hide shall be in one or more of the following forms, as specified by the purchaser:a) whole hides;b) bellies;c) dossets (double backs);d

47、) shoulders;e) butts;f) sides;g) culattas;h) fronts.4.2.2 The trim shall be as agreed between the supplier and purchaser4.3 TanningAfter pretanning operations, bovine hides or part hides shall be tanned with basic chromium sulfate as the primary tanning agent. The cut cross-section shall be such tha

48、t the hide is completely penetrated by the bluish colour of the chromium sulfate when examined visually. Tanning shall be carried out at a pH of 3,0 or above.4.4 Fungicidal additivesFungicides shall be used to inhibit mould growths in bovine wet blue leather.NOTE 1 Fungicides used to inhibit mould g

49、rowth and pigmentation should be effective and should not cause a health hazard. The types of fungicide used and their dosage should preferably be agreed between the purchaser and the supplier2 ISO 2013 All rights reservedBS ISO 5433:2013ISO 5433:2013(E)NOTE 2 Fungicides should preferably be applied in quantities appropriate to ensure storage for up to 4 months at the temperature and humidity prevailing during storage or transportation.4.5 PresentationBovine wet blue l