BS ISO 5610-9-2014 Tool holders with rectangular shank for indexable inserts Style L《数控刀片的矩形柄刀架 L款》.pdf

1、BSI Standards PublicationBS ISO 5610-9:2014Tool holders with rectangularshank for indexable insertsPart 9: Style LBS ISO 5610-9:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 5610-9:2014. Itsupersedes BS ISO 5610-9:2010 which is withdrawn.The UK participa

2、tion in its preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract.

3、 Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 83617 6ICS 25.100.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority

4、of theStandards Policy and Strategy Committee on 31 August 2014.Amendments issued since publicationDate Text affectedBS ISO 5610-9:2014 ISO 2014Tool holders with rectangular shank for indexable inserts Part 9: Style LPorte-plaquette queue rectangulaire pour plaquettes amovibles Partie 9: Forme LINTE

5、RNATIONAL STANDARDISO5610-9Second edition2014-09-01Reference numberISO 5610-9:2014(E)BS ISO 5610-9:2014ISO 5610-9:2014(E)ii ISO 2014 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized othe

6、rwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeC

7、ase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 5610-9:2014ISO 5610-9:2014(E) ISO 2014 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 13 Dimensions . 13.1 General . 13.2

8、Tool holder style L for rhombic indexable insert shape C . 23.3 Tool holder style L for hexagonal indexable insert shape W . 44 Designation 55 Material 66 Design 66.1 Type of mounting 66.2 Corner radius, r66.3 Thickness, s, of indexable insert . 77 Extent of delivery . 78 Marking 7Bibliography 8BS I

9、SO 5610-9:2014ISO 5610-9:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body intere

10、sted in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical

11、Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documen

12、ts should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible

13、 for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for t

14、he convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: F

15、oreword - Supplementary informationThe committee responsible for this document is ISO/TC 29, Small tools, Subcommittee SC 9, Tools with defined cutting edges, cutting items.This second edition cancels and replaces the first edition (ISO 5610-9:2010), of which it constitutes a minor revision.ISO 5610

16、 consists of the following parts, under the general title Tool holders with rectangular shank for indexable inserts: Part 1: General survey, correlation and determination of dimensions Part 2: Style A Part 3: Style B Part 4: Style D Part 5: Style F Part 6: Style G Part 7: Style J Part 8: Style K Par

17、t 9: Style L Part 10: Style N Part 11: Style R Part 12: Style S Part 13: Style Tiv ISO 2014 All rights reservedBS ISO 5610-9:2014ISO 5610-9:2014(E) Part 14: Style H Part 15: Style V ISO 2014 All rights reserved vBS ISO 5610-9:2014BS ISO 5610-9:2014Tool holders with rectangular shank for indexable in

18、serts Part 9: Style L1 ScopeThis part of ISO 5610 specifies tool holders with rectangular shank, style L, i.e. with offset shank and cutting edge angle r= 95 for side and end cutting.These tool holders are primarily intended for indexable inserts made of hard metal or other cutting materials to be m

19、ounted by clamping and to be used for turning operations.NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS 13399-3 are given in ISO 5610-1:2014, Table A.1.2 Normative referencesT

20、he following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 5608:

21、2012, Turning and copying tool holders and cartridges for indexable inserts DesignationISO 5610-1:2014, Tool holders with rectangular shank for indexable inserts Part 1: General survey, correlation and determination of dimensions3 Dimensions3.1 GeneralIt is not necessary for tool holders to comply w

22、ith the pictorial representation; only the dimensions given shall be observed.For determination of dimensions h1, f, and l1, see ISO 5610-1.For explanation of the designation code for tool holders, see ISO 5608.NOTE The values of rake angles and inclination angles shown in the figures are recommende

23、d values; they can vary according to the application.INTERNATIONAL STANDARD ISO 5610-9:2014(E) ISO 2014 All rights reserved 1BS ISO 5610-9:2014ISO 5610-9:2014(E)3.2 Tool holder style L for rhombic indexable insert shape CKeyaInclination angle, s.bRake angle, o.NOTE This figure shows a right-hand too

24、l holder (R); left-hand tool holder (L) laterally reversed.Figure 1 Tool holder style L for rhombic indexable insert CTable 1Dimensions in millimetresSymbolah1js13bh13l3f005+ ,h2h13l1ak16l2max.sbSCLCR 0808 068 8 6,4 10 8 12 2,38SCLCL 0808 06aFor the selection of length, l1, the dash may be replaced

25、by the dimensions of ISO 5610-1:2014, Table 2. For letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.2 ISO 2014 All rights reservedBS ISO 5610-9:2014ISO 5610-9:2014(E)Symbolah1js13bh13l3f005+ ,h2h13l1ak16l2max.sbSCLCR 1010 0610 10 6,

26、4 12 10 12 2,38SCLCL 1010 06SCLCR 1212 0912 12 9,7 16 12 32 3,97SCLCL 1212 09SCLCR 1616 0916 16 9,7 20 16 32 3,97SCLCL 1616 09SCLCR 1616 1216 16 12,9 20 16 36 4,76SCLCL 1616 12PCLNR 1616 12PCLNL 1616 12SCLCR 2020 1220 20 12,9 25 20 36 4,76SCLCL 2020 12PCLNR 2020 12PCLNL 2020 12CCLNR 2525 1225 25 12,

27、9 32 25 367,95CCLNL 2525 12SCLCR 2525 124,76SCLCL 2525 12PCLNR 2525 12PCLNL 2525 12CCLNR 2525 1625 25 16,1 32 25 407,95CCLNL 2525 16PCLNR 2525 166,35PCLNL 2525 16CCLNR 3225 1232 25 12,9 32 32 367,95CCLNL 3225 12SCLCR 3225 124,76SCLCL 3225 12PCLNR 3225 12PCLNL 3225 12CCLNR 3225 1632 25 16,1 32 32 407

28、,95CCLNL 3225 16PCLNR 3225 166,35PCLNL 3225 16PCLNR 3225 1932 32 19,3 40 32 45 6,35PCLNL 3225 19aFor the selection of length, l1, the dash may be replaced by the dimensions of ISO 5610-1:2014, Table 2. For letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness witho

29、ut shim, if applicable.Table 1 ISO 2014 All rights reserved 3BS ISO 5610-9:2014ISO 5610-9:2014(E)Symbolah1js13bh13l3f005+ ,h2h13l1ak16l2max.sbPCLNR 4040 1940 40 19,3 50 40 45 6,35PCLNL 4040 19aFor the selection of length, l1, the dash may be replaced by the dimensions of ISO 5610-1:2014, Table 2. Fo

30、r letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.3.3 Tool holder style L for hexagonal indexable insert shape WKeyaInclination angle, s.bRake angle, o.NOTE This figure shows a right-hand tool holder (R); left-hand tool holder (L)

31、laterally reversed.Figure 2 Tool holder style L for hexagonal indexable insert WTable 14 ISO 2014 All rights reservedBS ISO 5610-9:2014ISO 5610-9:2014(E)Table 2Dimensions in millimetresSymbolah1js13bh13l3f005+ ,h2h13l1ak16l2max.sbSWLCR 0808 048 8 4,35 10 8 25 2,38SWLNL 0808 04SWLCR 1010 0410 10 4,35

32、 12 10 25 2,38SWLCL 1010 04SWLCR 1212 0412 12 4,35 16 12 25 2,38SWLCL 1212 04SWLCR 1212 0612 12 6,5 16 12 25 4,76SWLCL 1212 06PWLNR 1616 0616 16 6,5 20 16 364,76PWLNL 1616 06SWLNR 1616 063,97SWLNL 1616 06PWLNR 2020 0620 206,525 20 364,76PWLCL 2020 06SWLNR 2020 06SWLCL 2020 063,97PWLNR 2020 088,7 45P

33、WLNL 2020 08PWLNR 2525 0625 256,532 25 364,76PWLNL 2525 06SWLCR 2525 063,97SWLCL 2525 06PWLNR 2525 088,7 45 4,76PWLNL 2525 08PWLNR 3225 0632 256,532 32 364,76PWLNL 3225 06PWLNR 3225 088,7 45PWLNL 3225 08PWLNR 3232 0832 32 8,7 40 32 45 4,76PWLNL 3232 08aFor the selection of length, l1, the dash can b

34、e replaced by the dimensions of ISO 5610-1:2014, Table 2. For letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.4 DesignationA tool holder in accordance with this part of ISO 5610 shall be designated by the following:a) “Tool holder”

35、;b) a reference to this part of ISO 5610 (i.e. ISO 5610-9); ISO 2014 All rights reserved 5BS ISO 5610-9:2014ISO 5610-9:2014(E)c) type of mounting, in accordance with ISO 5608;d) symbol for indexable insert shape, in accordance with ISO 5608;e) symbol for tool style, in accordance with ISO 5608;f) sy

36、mbol for the indexable insert normal clearance, in accordance with ISO 5608;g) symbol for hand of tool, in accordance with ISO 5608;h) its height, h1, width, b, and length, l1(symbol for tool length in accordance with ISO 5608);i) its cutting edge length, l3.EXAMPLE 1 Tool holder for a horizontally

37、mounted bore-clamped (P) rhombic indexable insert shape C (C), tool holder style L (L), for normal clearance of indexable insert n= 0 (N), right-hand type (R), with height h1= 32 mm and width b = 25 mm (3225), length l1= 170 mm (P), for cutting edge length l3= 12,9 mm (12) is designated as follows:T

38、ool holder ISO 5610-9 - PCLNR 3225 P12EXAMPLE 2 Tool holder for a horizontally mounted bore-clamped (P) trigon indexable insert shape W (W), tool holder style L (L), for normal clearance of indexable insert n= 0 (N), right-hand type (R), with height h1= 20 mm and width b = 20 mm (2020), length l1= 1

39、25 mm (K), for cutting edge length l3= 8,7 mm (08) is designated as follows:Tool holder ISO 5610-9 - PWLNR 2020 K085 MaterialThe material should be steel with a tensile strength of at least 1 200 N/mm2.6 Design6.1 Type of mountingStandard design of tool holders with indexable insert shall be mounted

40、 in accordance with Tables 1 and 2.Other types of mounting are at the manufacturers discretion or upon agreement. The letter symbol in the designation, symbol 1, shall then be replaced by the respective symbol for the chosen or agreed-upon type of mounting in accordance with ISO 5608.For the modifie

41、d type of mounting deviating from Tables 1 and 2, the relevant indexable insert thickness shall also be considered.6.2 Corner radius, rTool holders in accordance with this part of ISO 5610 can be equipped with indexable inserts with cutting edge length, l3, as specified in Tables 1 and 2 and any cor

42、ner radius, r.The values for l1given in ISO 5610-1:2014, Table 2, apply to tool holders with indexable inserts having corner radii, r, in accordance with Table 3.6 ISO 2014 All rights reservedBS ISO 5610-9:2014ISO 5610-9:2014(E)Table 3Dimensions in millimetresl3rC W6,4 4 0,49,7 6,50,812,9 8,716,1 1,

43、219,3 NOTE The values given for rare nominal values. The accurate values converted from the inch dimensions are 0,397 mm, 0,794 mm and 1,191 mm.For indexable inserts with corner radii, r, other than those specified in Table 3, the dimensions of f and l1shall be determined in accordance with ISO 5610

44、-1.The tolerances for h1, f, and l1refer to dimensions measured with master indexable insert and master shim, if applicable.6.3 Thickness, s, of indexable insertThe values for thickness, s, given in Tables 1 and 2, apply to indexable inserts without shim and for the standard design of tool holders.F

45、or tool holders for indexable inserts with thicknesses deviating from the specified values, the thickness shall be indicated when ordering or upon delivery (in the handbook).7 Extent of deliveryTool holders shall be delivered complete with clamping device, but without indexable insert(s).8 MarkingTo

46、ol holders shall be marked with the letter symbol and the name or trademark of the manufacturer.Additional marking is at the manufacturers discretion or upon agreement.Deviations in marking may be by mutual agreement.A reference to this part of ISO 5610, i.e. ISO 5610-9:2014, shall be given on the p

47、ackaging. ISO 2014 All rights reserved 7BS ISO 5610-9:2014ISO 5610-9:2014(E)Bibliography1 ISO 883, Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole Dimensions2 ISO 3002-1, Basic quantities in cutting and grinding Part 1: Geometry of the active part of cutting tools Gen

48、eral terms, reference systems, tool and working angles, chip breakers3 ISO 3364, Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole Dimensions4 ISO 6987, Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole Dimensions5 ISO/TS 13399-2, Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items6 ISO/TS 13399-3, Cutting tool data representation and exchange Part 3: Reference dictionary for tool items8 ISO 2014 All rights reservedBS ISO 5610-9:2014BS ISO 5610-9:2014ISO 5610-