1、Equipment for crop protection Spraying equipmentPart 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayersBS ISO 56822:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Equipment for crop protection Spraying equipment Part
2、 2:Test methods to assess the horizontal transverse distribution for hydraulic sprayersMatriel de protection des cultures quipement de pulvrisation Partie 2: Mthodes dessai pour valuer la distribution transversale horizontale des pulvrisateurs jet projetINTERNATIONALSTANDARDISO5682-2Third edition201
3、7-05Reference numberISO 5682-2:2017(E)National forewordThis British Standard is the UK implementation of ISO 56822:2017. It supersedes BS 635614:1997, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AGE/15, Equipment for crop protection and application
4、 of liquid fertilizer.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 P
5、ublished by BSI Standards Limited 2017ISBN 978 0 580 80812 8ICS 65.060.40Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issu
6、ed since publicationDate Text affectedBRITISH STANDARDBS ISO 56822:2017 ISO 2017Equipment for crop protection Spraying equipment Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayersMatriel de protection des cultures quipement de pulvrisation Partie 2: Mthodes
7、dessai pour valuer la distribution transversale horizontale des pulvrisateurs jet projetINTERNATIONAL STANDARDISO5682-2Third edition2017-05Reference numberISO 5682-2:2017(E)BS ISO 56822:2017ISO 5682-2:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerla
8、ndAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be request
9、ed from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 56822:2017ISO 5682-2:2017(E)ii ISO 2017 All rights
10、reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an
11、intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.org
12、www.iso.orgISO 5682-2:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Measuring equipment . 15 Test conditions . 25.1 General . 25.2 Temperature and relative humidity 25.3 Choice of nozzles for the tests 25.4 Control pressure 26 Test methods . 26.1 General . 26.2 St
13、andard conditions . 36.3 Transverse distribution evaluation by means of sprayed liquid volume measurement sprayed liquid volume measurement method 36.3.1 Setup . 36.3.2 Measurement 36.3.3 Results . 46.4 Nozzle tip position . 46.4.1 Spacing . 46.4.2 Alignment . 46.5 Transverse distribution evaluation
14、 by means of nozzle flow rate measurement nozzle flow rate measurement test method 46.5.1 Setup . 46.5.2 Measurements 56.5.3 Results . 56.6 Transverse distribution evaluation by means of nozzle tip pressure measurement nozzle tip pressure measurement test method 56.6.1 Setup . 56.6.2 Measurements 66
15、.6.3 Results . 6Annex A (informative) Transverse distribution test report . 7Annex B (informative) Applicable test methods 9Annex C (informative) Guidance to estimate horizontal transverse distribution 10 ISO 2017 All rights reserved iiiContents PageBS ISO 56822:2017ISO 5682-2:2017(E)ForewordISO (th
16、e International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committ
17、ee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechn
18、ical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted i
19、n accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent right
20、s. Details of any patent rights identified during the development of the document will be in the introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not consti
21、tute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see t
22、he following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection.This third edition cancels and replaces the second edition (ISO 5682-2:1997), which
23、has been technically revised as follows: addition of a spray flow transverse volume distribution test method; addition of a spray pressure transverse distribution test method; clarification for nozzle positioning; addition of an annex; agitation method removed; suppression of fill from the tank fill
24、ing device; suppression of capacity of the tank; suppression of head losses in the delivery piping; suppression of discharge from the pump.A list of all the parts in the ISO 5682 series can be found on the ISO website.iv ISO 2017 All rights reservedBS ISO 56822:2017ISO 5682-2:2017(E)ForewordISO (the
25、 International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committe
26、e has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechni
27、cal standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in
28、 accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights
29、. Details of any patent rights identified during the development of the document will be in the introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constit
30、ute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see th
31、e following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection.This third edition cancels and replaces the second edition (ISO 5682-2:1997), which h
32、as been technically revised as follows: addition of a spray flow transverse volume distribution test method; addition of a spray pressure transverse distribution test method; clarification for nozzle positioning; addition of an annex; agitation method removed; suppression of fill from the tank filli
33、ng device; suppression of capacity of the tank; suppression of head losses in the delivery piping; suppression of discharge from the pump.A list of all the parts in the ISO 5682 series can be found on the ISO website.iv ISO 2017 All rights reserved INTERNATIONAL STANDARD ISO 5682-2:2017(E)Equipment
34、for crop protection Spraying equipment Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers1 ScopeThis document is applicable for sprayers intended to apply liquid over a horizontal surface.This document specifies test methods to assess sprayed liquid horizont
35、al transverse distribution. Methods are based on sprayed liquid volume measurement, nozzle flow rate measurement or nozzle tip pressure measurement.This document does not cover aerial sprayers.Hydraulic sprayers use a range of design features to deliver and control spray. The test methods provided i
36、n this document are all useful but dont give the same information. They are complementary. Some test methods are not suitable for all sprayer types. Applicable test methods are described in an informative annex.2 Normative referencesThe following documents are referred to in the text in such a way t
37、hat some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 5681, Equipment for crop protection VocabularyISO 5682-1:2017
38、, Equipment for crop protection Spraying equipment Part 1: Test methods for sprayer nozzles3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 5681 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses:
39、ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp IEC Electropedia: available at h t t p :/ www .electropedia .org/ 4 Measuring equipmentMeasuring equipment shall conform to ISO 5682-1:2017, Clause 4.The horizontal patternator shall be in accordance with ISO 5682-1:2017, 4.2.I
40、n the case of a horizontal patternator comprised of grooves spaced at intervals of 50 mm or 25 mm, summing of two or four adjacent grooves, respectively, to derive an equivalence to 100 mm grooves is acceptable. ISO 2017 All rights reserved 1BS ISO 56822:2017ISO 5682-2:2017(E)Low flow rate measureme
41、nts may not be possible directly with available flow meters. In this case, a volume collected over measured time may be used.5 Test conditions5.1 GeneralThe sprayer is to be operated per sprayer manufacturers instructions. All operational conditions and test parameters shall be indicated in the test
42、 report. Clean water used for testing shall be free from solids in suspension.If an adjuvant, plant protection product or other chemical is added, its identity, properties and concentration shall be documented in the test report.5.2 Temperature and relative humidityThe temperature of the test liquid
43、 and the air temperature of the test premises shall be between 5 C and 35 C during the test.The temperature and the relative humidity of the test premises shall be stated in the test report. Relative humidity is recorded for information only.5.3 Choice of nozzles for the testsThe spray boom shall be
44、 equipped with nozzles, including nozzle filters and anti-drip devices, according to the relevant specifications provided by the sprayer manufacturers instruction manual. The nozzle type that is used shall be documented by nozzle manufacturer, model and size.Nozzle size may be chosen for very high f
45、low if the purpose of the evaluation is to determine maximum variation of the sprayer transverse distribution.Nozzle size may be chosen to provide lower flow, more representative of a common application practice.5.4 Control pressureThe control pressure is to be chosen according to the operating char
46、acteristic of the nozzle. During the test period, the pressure shall not deviate by more than 5 % from the intended pressure.The control pressure shall be stated in the test report.6 Test methods6.1 GeneralSprayed liquid volume horizontal transverse distribution (6.3), nozzle volume transverse distr
47、ibution (6.5), and nozzle tip pressure transverse distribution (6.6) are three methods that evaluate differently horizontal transverse liquid distribution.When nozzle volume or nozzle tip pressure methods are used to evaluate horizontal transverse liquid distribution, nozzle tip position, nozzle ori
48、entation (verticality of the nozzle and twist of the nozzle from perpendicular) and nozzle tip spray pattern of all nozzles shall also be verified. It shall also be verified that no objects occur in the sprayed liquid stream.For nozzle tip position requirements, see 6.4.Annex B identifies tests or t
49、est methods typically applicable to different sprayer types.2 ISO 2017 All rights reservedBS ISO 56822:2017ISO 5682-2:2017(E)Low flow rate measurements may not be possible directly with available flow meters. In this case, a volume collected over measured time may be used.5 Test conditions5.1 GeneralThe sprayer is to be operated per sprayer manufacturers instructions. All operational conditions and test parameters shall be indicated in the test report. Clean water u
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1