BS ISO 603-8-1999 Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling snagging《粘合磨料产品 尺寸 去毛刺和清理用砂轮》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 603-8:1999 ICS 25.

2、100.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Bonded abrasive products Dimensions Part 8: Grinding wheels for deburring and fettling/snaggingThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the au

3、thority of the Standards Committee and comes into effect on 15 November 1999 BSI 11-1999 ISBN 0 580 35704 X BS ISO 603-8:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 603-8:1999 and implements it as the UK national sta

4、ndard. The UK participation in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, abrasive tools, paper, cloths and powder, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on t

5、he interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Stand

6、ards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standar

7、d does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an

8、 inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO6038:1999 (E) INTERNATIONAL STANDARD ISO 6038 Firstediti

9、on 19990715 Bondedabrasiveproducts Dimensions Part8: Grindingwheelsfordeburringand fettling/snagging ProduitsabrasifsagglomrsDimensions Partie8:MeulespourbarbageetbavurageISO6038:1999(E) ii Foreword ISO (the InternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(

10、ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonw

11、ithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesa

12、recirculatedtoth ememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO6038waspreparedbyTechnicalCommitteeISO/TC 29,Smalltools,subcommittee SC5, Grindingwheelsandabrasives . Thisfirstedition,togetherwithISO6031:

13、1999toISO6037:1999andISO6039:1999toISO 60316:1999 , cancels andreplacesISO/R603:1967,ISO6032:1981,ISO1117:1975,ISO2220:1972,ISO2933:1974,ISO 3290:1976 andISO3921:1976asatechnicalrevisionofthesestandards. ISO603consistsofthefollowingparts,underthegeneraltitle BondedabrasiveproductsDimensions : Part1:

14、Grindingwheelsforexternalcylindricalgrindingbetweencentres Part2:Grindingwheelsforcentrelessexternalcylindricalgrinding Part3:Grindingwheelsforinternalcylindricalgrinding Part4:Grindingwheelsforsurfacegrinding/peripheralgrinding Part5:Grindingwheelsforsurfacegrinding/facegrinding Part6:Grindingwheel

15、sfortoolandtoolroomgrinding Part7:Grindingwheelsformanuallyguidedgrinding Part8:Grindingwheelsfordeburringandfettling/snagging Part9:Grindingwheelsforhighpressuregrinding Part10:Stonesforhoningandsuperfinishings Part11:Handfinishingsticks Part12:Grindingwheelsfordeburringandfettlingonastraightgrinde

16、r ISO6038:1999(E) iii Part13:Grindingwheelsfordeburringandfettlingonaverticalgrinder Part14:Grindingwheelsfordeburringandfettling/snaggingonananglegrinder Part15:Grindingwheelsforcuttingoffonstationaryormobilecuttingoffmachines Part16:GrindingwheelsforcuttingoffonhandheldpowertoolsINTERNATIONALSTAND

17、ARD ISO6038:1999(E) 1 BondedabrasiveproductsDimensions Part8: Grindingwheelsfordeburringandfettling/snagging 1Scope ThispartofISO603specifiesthenominaldimensions,inmillimeters,of: Type1Straightgrindingwheel These bonded abrasive productsareintendedtobeusedfordeburringandfettlingofanysurfaceofaworkpi

18、ece.The workpieceismanuallyguidedandthegrindingwheelisfixed. 2Normativereferences The following normativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsof this partofISO 603.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdo notapply.Howe

19、ver,partiestoagreementsbasedonthispartofISO 603areencouragedtoinvestigatethe possibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.For undated references,thelateseditionofthenormativedocumentreferre dtoapplies.MembersofISOandIECmaintain registersofcurrentlyvalidInternationa

20、lStandards. ISO525:1999, BondedabrasiveproductsGeneralrequirements . ISO6103:1999, BondedabrasiveproductsStaticbalancingofgrindingwheelsTesting . ISO13942: 1) , BondedabrasiveproductsLimitdeviationsandrunouttolerances . 1) Tobepublished.ISO6038:1999(E) 2 3Dimensions SeeFigure1andTable1. Figure1Type1

21、 Table1DimensionsofType1 DTH 13 20 25 32 40 50 63 80 100 100XX 16 20 125XX 20 32 150XX 20 32 200 250 X X X X 32 300 XX 32 50,8 76,2 350/356 X X X 32 50,8 76,2 400/406 XXX 50,8 76,2 127 450/457 XXX 50,8 76,2 127 152,4 500/508 XXX 50,8 127 152,4 203,2 600/610 XXX 203,2 304,8 750/762 XXX 203,2 304,8 IS

22、O6038:1999(E) 3 4Designation Acompletedesignationofabondedabrasiveproductinaccordancewit h this part of ISO 603 shall be consist of the followinginformation: a) b) designationofthebondedabrasives,e.g.Grindingwheel; referenceofthispartofISO603; c) d) e) f) type(shape); dimensions; specificationsofani

23、nternalnature; themaximumoperatingspeed. InaccordancewithISO525 andthispartofISO603 EXAMPLE Agrindingwheelfordeburringandfettlingonabench,pedestalgrinderor swing frame machine, Type 1, D=350mm, T=40mm ,H = 32 mm,natureofabrasive A,grainsize 36,grade N,structure 5,natureofbon d Vandamaximum operating

24、speedof40m/sisdesignatedasfollows: Grinding wheelISO60381350 340 332 A36N5V40m/s 5Specifications Thespecificationsarelefttothemanufacturesdiscretion,seeISO525. 5.1Tolerances LimitdeviationsandrunouttolerancesinaccordancewithISO13942. 5.2Balancing BalancingisinaccordancewithISO6103. 5.3Marking Markin

25、gofbondedabrasiveproductsisinaccordancewithISO525.ISO6038:1999(E) 4 Bibliography 1ISO84861, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart1:MacrogritsF4 toF220 . 2ISO84862, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart2:Microgrits F230toF1200 .BS ISO 60

26、3-8:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

27、| | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision

28、. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the S

29、ecretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.

30、Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publish

31、ed as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available whi

32、ch give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other be

33、nefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Paten

34、ts Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary

35、details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.