BS ISO 6347-2017 Textile floor coverings Consumer information《纺织地板覆盖物 消费者信息》.pdf

1、BS ISO 6347:2017Textile floor coverings Consumer informationBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 6347:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 6347:2017.The UK participation in its preparation was e

2、ntrusted to Technical Committee PRI/3, Textile floor coverings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

3、 The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 90409 7 ICS 97.020; 97.150Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Commit

4、tee on 31 March 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 6347:2017 ISO 2017Textile floor coverings Consumer informationRevtements de sol textiles Information du consommateurINTERNATIONAL STANDARDISO6347Third edition2017-02Reference numberISO 6347:2017(E)B

5、S ISO 6347:2017ISO 6347:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, inc

6、luding photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel

7、. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 6347:2017ISO 6347:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Product specifications to be provided to the consumer 14.1 Essential information 14.1.1 General 14.1.2 Means of identifying the

8、responsible supplier. 14.1.3 A commercial reference . 24.1.4 Type and fibre content of use-surface . 24.1.5 Dimensions . 24.1.6 Total thickness . 24.1.7 Total mass per unit area 24.2 Optional information . 2Annex A (informative) Optional information for the consumer 3Bibliography 4 ISO 2017 All righ

9、ts reserved iiiContents PageBS ISO 6347:2017ISO 6347:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committ

10、ees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Int

11、ernational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the di

12、fferent types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO

13、 shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this doc

14、ument is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the

15、 Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.The committee responsible for this document is ISO/TC 219, Floor coverings.This third edition cancels and replaces the second edition (ISO 6347:2004), which has been technically revised to include the evolut

16、ion in the analysis test methods for fibre content.iv ISO 2017 All rights reservedBS ISO 6347:2017INTERNATIONAL STANDARD ISO 6347:2017(E)Textile floor coverings Consumer information1 ScopeThis document specifies the technical subjects that form the basis for the provision of information, at the poin

17、t of sale, for consumer guidance prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of

18、 this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1765, Machine-made textile floor coverings Determination of thicknessISO 2076, Textiles Man-made fibres Generic namesISO

19、3018, Textile floor coverings Rectangular textile floor coverings Determination of dimensionsISO 6938, Textiles Natural fibres Generic names and definitionsISO 8543, Textile floor coverings Methods for determination of massISO 24342, Resilient and textile floor-coverings Determination of side length

20、, edge straightness and squareness of tiles3 Terms and definitionsNo terms and definitions are listed in this document.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online bro

21、wsing platform: available at h t t p :/ www .iso .org/ obp4 Product specifications to be provided to the consumer4.1 Essential information4.1.1 GeneralEssential information shall be provided, along with the textile floor covering, at all stages from manufacturer to consumer. The manufacturer or his

22、authorized representative shall provide the following minimum information to each consumer with each textile floor covering. The manufacturers tolerances shall be included.4.1.2 Means of identifying the responsible supplierThis information shall contain the name of the manufacturer or his authorized

23、 representative, brand name and trade mark. ISO 2017 All rights reserved 1BS ISO 6347:2017ISO 6347:2017(E)4.1.3 A commercial referenceInformation which positively and uniquely identifies the individual textile floor covering within the suppliers range, i.e. style name and/or style number.4.1.4 Type

24、and fibre content of use-surfaceMan-made fibres shall be identified in accordance with ISO 2076. Natural fibres shall be identified in accordance with ISO 6938.When analysis of fibre contents is required, it shall be in accordance with ISO 1833-1 to ISO 1833-26.Attention is drawn to national legisla

25、tion having requirements for labelling textiles according to fibre content.4.1.5 DimensionsThe length and width of rectangular textile floor coverings sold as rugs or mats, and the width of those sold as a single piece (e.g. runners or wall-to-wall floor covering) shall be determined in accordance w

26、ith ISO 3018.The side length, edge straightness and squareness of textile floor covering tiles, sold as modular carpet tiles, shall be determined in accordance with ISO 24342.4.1.6 Total thicknessTotal thickness shall be determined in accordance with ISO 1765.4.1.7 Total mass per unit areaTotal mass

27、 per unit area shall be determined in accordance with ISO 8543.4.2 Optional informationOptional information relating to the textile floor covering shall be provided in a leaflet, or other form, at the request of the purchaser.Annex A lists the items of optional information, some or all of which shou

28、ld be provided.2 ISO 2017 All rights reservedBS ISO 6347:2017ISO 6347:2017(E)Annex A (informative) Optional information for the consumerThe following is a list of optional information related to the textile floor covering which should be provided at the request of the purchaser:a) type of manufactur

29、e or construction, defined in accordance with ISO 2424;b) total pile mass per unit area, determined in accordance with ISO 8543;c) surface pile thickness, determined in accordance with ISO 1766;d) surface pile density, determined in accordance with ISO 8543;e) number of tufts and/or loops per unit l

30、ength and width, determined in accordance with ISO 1763;f) static electrical propensity, determined in accordance with ISO 6356;g) electrical resistance, determined in accordance with ISO 10965;h) colour fastness to light, determined in accordance with ISO 105-B02;i) colour fastness to agents other

31、than light, e.g. colour fastness to rubbing in accordance with ISO 105-X12 and colour fastness to water in accordance with ISO 105-E01.j) appearance retention rating, determined in accordance with ISO 10361 and assessed in accordance with ISO 9405;k) pile anchorage, determined in accordance with ISO

32、 4919;l) resistance to delamination of the substrate, determined in accordance with ISO 11857;m) flammability behaviour, determined in accordance with ISO 9239-1 and applicable national requirement;n) ignitability behaviour subjected to direct impingement of flame, determined in accordance with ISO

33、11925-2 and applicable national requirement;o) typical use areas for which the product is considered as suitable, indicated in accordance with ISO 10874;p) substrate details;q) installation instructions in accordance with national regulations or in accordance with the manufacturers guidelines;r) cle

34、aning/maintenance instructions in accordance to the manufacturers guidelines;s) any other information relevant to the product and its intended use. ISO 2017 All rights reserved 3BS ISO 6347:2017ISO 6347:2017(E)Bibliography1 ISO 105-B02, Textiles Tests for colour fastness Part B02: Colour fastness to

35、 artificial light: Xenon arc fading lamp test2 ISO 105-E01, Textiles Tests for colour fastness Part E01: Colour fastness to water3 ISO 105-X12, Textiles Tests for colour fastness Part X12: Colour fastness to rubbing4 ISO 1763, Carpets Determination of number of tufts and/or loops per unit length and

36、 per unit area5 ISO 1766, Textile floor coverings Determination of thickness of pile above the substrate6 ISO 1833-1, Textiles Quantitative chemical analysis Part 1: General principles of testing7 ISO 1833-2, Textiles Quantitative chemical analysis Part 2: Ternary fibre mixtures8 ISO 1833-3, Textile

37、s Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibres (method using acetone)9 ISO 1833-4, Textiles Quantitative chemical analysis Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite)10 ISO 1833-5, Textiles Quantitative chemical anal

38、ysis Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)11 ISO 1833-6, Textiles Quantitative chemical analysis Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)12 ISO 1833-7

39、, Textiles Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibres (method using formic acid)13 ISO 1833-8, Textiles Quantitative chemical analysis Part 8: Mixtures of acetate and triacetate fibres (method using acetone)14 ISO 1833-9, Textiles Quantitative chemical anal

40、ysis Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol)15 ISO 1833-10, Textiles Quantitative chemical analysis Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)16 ISO 1833-11, Textiles Quantitative chemical analysis Pa

41、rt 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid)17 ISO 1833-12, Textiles Quantitative chemical analysis Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)18 ISO 1833-13, Te

42、xtiles Quantitative chemical analysis Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone)19 ISO 1833-14, Textiles Quantitative chemical analysis Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid)20 ISO 1833-15, Text

43、iles Quantitative chemical analysis Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content)21 ISO 1833-16, Textiles Quantitative chemical analysis Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene)4 ISO 2017 All rights reserv

44、edBS ISO 6347:2017ISO 6347:2017(E)22 ISO 1833-17, Textiles Quantitative chemical analysis Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid)23 ISO 1833-18, Textiles Quantitative chemical analysis Part 18: Mixtures of silk and wool

45、 or hair (method using sulfuric acid)24 ISO 1833-19, Textiles Quantitative chemical analysis Part 19: Mixtures of cellulose fibres and asbestos (method by heating)25 ISO 1833-20, Textiles Quantitative chemical analysis Part 20: Mixtures of elastane and certain other fibres (method using dimethylacet

46、amide)26 ISO 1833-21, Textiles Quantitative chemical analysis Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone)27 ISO 1833-22, Textiles Quantitative chemical analysis Part 22: Mixtures of viscose or

47、certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)28 ISO 1833-24, Textiles Quantitative chemical analysis Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane)29 ISO 1833-25, Textiles Quantitative chem

48、ical analysis Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform)30 ISO 1833-26, Textiles Quantitative chemical analysis Part 26: Mixtures of melamine and cotton or aramide fibres (method using hot formic acid)31 ISO 2424, Textile floor covering

49、s Vocabulary32 ISO 4919, Carpets Determination of tuft withdrawal force33 ISO 6356, Textile and laminate floor coverings Assessment of static electrical propensity Walking test34 ISO 9239-1, Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source35 ISO 9405, Textile floor cover