BS ISO 6753-2-1998 Tools for pressing and moulding - Machined plates - Machined plates for moulds《模压工具 机加工金属板 第2部分 模具用机加工金属板》.pdf

1、BRITISH STANDARD BS ISO 6753-2:1998 Tools for pressing and moulding Machined plates Part 2: Machined plates for moulds ICS 25.120.30BSISO6753-2:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Boa

2、rd and comes into effect on 15 July1998 BSI 05-1999 ISBN 0 580 30167 2 National foreword This British Standard reproduces verbatim ISO6753-2:1998 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee MTE/12, Tools for pressing and

3、 moulding, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and

4、promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under t

5、he section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct appli

6、cation. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO title page, page ii, pages 1 to 6 and a back cover. This standard has been updated (see copyrigh

7、t date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSISO6753-2:1998 BSI 05-1999 i Contents Page National foreword Inside front cover Foreword ii 1 Scope 1 2 Dimensions 1

8、3 Material and corresponding hardness 1 4 Designation 1 Figure 1 Clamping, cavity and intermediate plates 1 Figure 2 Ejector plates and risers 4 Table 1 Dimensions of clamping, cavity and intermediate plates 2 Table 2 Dimensions of ejector plates and risers 4 Table 3 Tolerances, limit deviations and

9、 surface roughness 6ii blankBSISO6753-2:1998 ii BSI 05-1999 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical commit

10、tees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the In

11、ternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75% of the member

12、 bodies casting a vote. International Standard ISO6753-2 was prepared by Technical Committee ISO/TC29, Small tools, Subcommittee 8, Tools for pressing and moulding. Together with ISO6753-1, it cancels and replaces ISO6753:1982, which has been technically revised. ISO6753 consists of the following pa

13、rts, under the general title Tools for pressing and moulding Machined plates: Part 1: Machined plates for press tools, jigs and fixtures; Part 2: Machined plates for moulds. Descriptors: Moulding equipment, tools, plates, form specifications, dimensions, designation.BSISO6753-2:1998 BSI 05-1999 1 1

14、Scope This part of ISO6753 specifies the dimensions and tolerances, in millimetres, of machined plates for moulds of the following types: type A: clamping plates; type B: cavity plates; type C: intermediate plates; type D: ejector plates; type E: risers. It gives guidance relative to materials and h

15、ardness and specifies the designation of machined plates in accordance with this part of ISO6753. 2 Dimensions 2.1 Clamping plates (type A), cavity plates (type B) and intermediate plates (type C) See Figure 1 and Table 1. 2.2 Ejector plates (type D) and risers (type E) assigned to the size of plate

16、s See Figure 2 and Table 2. 2.3 Tolerances, limit deviations and surface roughness See Table 3. 3 Material and corresponding hardness The material and hardness are left to the manufacturers discretion. 4 Designation Machined plates for moulds in accordance with this part of ISO6753 shall be designat

17、ed by a) “machined plate”; b) reference to this part of ISO6753, i.e.ISO6753-2; c) its type (A, B, C, D or E); d) its length, l 2 , in millimetres (for types A, B orC), or its length l 1 , in millimetres (for types D or E); e) its length, l 1 , in millimetres (for types A, B or C), or its width b or

18、 b 1 , in millimetres (for types D or E); f) its thickness t 1 , t 2or t 3 , in millimetres; g) its class (I or II). EXAMPLE 1 The designation for a machined plate of type A of length l 2= 96mm, length l 1= 120mm, thickness t 1= 12,5mm and of class I is as follows: Machined plate ISO6753-2 A 96 120

19、12,5 I EXAMPLE 2 The designation for a machined plate of type D of length l 1= 96mm, width b = 20mm, thickness t 3 =25mm and of class II is as follows: Machined plate ISO6753-2 D 96 20 25 II Figure 1 Clamping, cavity and intermediate platesBSISO6753-2:1998 2 BSI 05-1999 Table 1 Dimensions of clampin

20、g, cavity and intermediate plates Sizes of plates t 1 l 2 l 1 12,5 16 20 25 32 40 50 63 80 100 125 160 200 96 96 x x x x x x x 120 x x x x x x x 120 120 x x x x x x x x 156 x x x x x x x x 156 156 x x x x x x x x x 196 x x x x x x x x x 220 x x x x x x x x x 246 x x x x x x x x x 276 x x x x x x x x

21、 x 310 x x x x x x x x x 196 196 x x x x x x x x 220 x x x x x x x x 246 x x x x x x x x 276 x x x x x x x x 310 x x x x x x x x 350 x x x x x x x x 396 x x x x x x x x 220 220 x x x x x x x x 246 x x x x x x x x 276 x x x x x x x x 310 x x x x x x x x 350 x x x x x x x x 246 246 x x x x x x x x x 2

22、76 x x x x x x x x x 310 x x x x x x x x x 350 x x x x x x x x x 396 x x x x x x x x x 446 x x x x x x x x x 496 x x x x x x x x x 276 276 x x x x x x x x 310 x x x x x x x x 350 x x x x x x x x 396 x x x x x x x x 446 x x x x x x x x 496 x x x x x x x x 556 x x x x x x x x 310 310 x x x x x x x x 3

23、50 x x x x x x x x 396 x x x x x x x x 446 x x x x x x x x 496 x x x x x x x x 556 x x x x x x x x 626 x x x x x x x xBSISO6753-2:1998 BSI 05-1999 3Table 1 Dimensions of clamping, cavity and intermediate plates Sizes of plates t 1 l 2 l 1 12,5 16 20 25 32 40 50 63 80 100 125 160 200 350 350 x x x x

24、x x x x x 396 x x x x x x x x x 446 x x x x x x x x x 496 x x x x x x x x x 556 x x x x x x x x x 626 x x x x x x x x x 706 x x x x x x x x x 396 396 x x x x x x x x 446 x x x x x x x x 496 x x x x x x x x 556 x x x x x x x x 626 x x x x x x x x 706 x x x x x x x x 796 x x x x x x x x 446 446 x x x

25、x x x x x 496 x x x x x x x x 556 x x x x x x x x 626 x x x x x x x x 706 x x x x x x x x 796 x x x x x x x x 896 x x x x x x x x 496 496 x x x x x x x x 556 x x x x x x x x 626 x x x x x x x x 706 x x x x x x x x 796 x x x x x x x x 896 x x x x x x x x 996 x x x x x x x x 556 556 x x x x x x x x 62

26、6 x x x x x x x x 706 x x x x x x x x 796 x x x x x x x x 896 x x x x x x x x 996 x x x x x x x x 1.116 x x x x x x x x 626 626 x x x x x x x 706 x x x x x x x 796 x x x x x x x 896 x x x x x x x 996 x x x x x x x 1.116 x x x x x x x 706 706 x x x x x x x 796 x x x x x x x 896 x x x x x x x 996 x x

27、x x x x x 1.116 x x x x x x x 796 796 x x x x x x x 896 x x x x x x x 996 x x x x x x x 1.116 x x x x x x x 896 896 x x x x x x x 996 x x x x x x x 1.116 x x x x x x xBSISO6753-2:1998 4 BSI 05-1999 Table 2 Dimensions of ejector plates and risers Figure 2 Ejector plates and risers Sizes of plates Ris

28、ers Ejector plates Outside dimensions Thickness, t 2 Outside dimensions Thickness, t 3 l 2 l 1 l 1 b 25 32 40 50 63 80 100 125 160 l 1 b 1 8 10 12,5 16 20 25 32 40 50 96 96 96 20 x x x x 96 54 x x 120 120 x x x x 120 x x 120 120 120 26 x x x x 120 66 x x 156 156 x x x x 156 x x 156 156 156 33 x x x

29、x 156 88 x x 196 196 x x x x 196 x x 220 220 x x x x 220 x x 246 246 x x x x 246 x x 276 276 x x x x 276 x x 310 310 x x x x 310 x x 196 196 196 40 x x x x 196 114 x x 220 220 x x x x 220 x x 246 246 x x x x 246 x x 276 276 x x x x 276 x x 310 310 x x x x 310 x x 350 350 x x x x 350 x x 396 396 x x

30、x x 396 x x 220 220 220 40 x x x x 220 138 x x 246 246 x x x x 246 x x 276 276 x x x x 276 x x 310 310 x x x x 310 x x 350 350 x x x x 350 x xBSISO6753-2:1998 BSI 05-1999 5Table 2 Dimensions of ejector plates and risers Sizes of plates Risers Ejector plates Outside dimensions Thickness, t 2 Outside

31、dimensions Thickness, t 3 l 2 l 1 l 1 b 25 32 40 50 63 80 100 125 160 l 1 b 1 8 10 12,5 16 20 25 32 40 50 246 246 246 47 x x x x 246 150 x x 276 276 x x x x 276 x x 310 310 x x x x 310 x x 350 350 x x x x 350 x x 396 396 x x x x 396 x x 446 446 x x x x 446 x x 496 496 x x x x 496 x x 276 276 276 47

32、x x x x 276 180 x x 310 310 x x x x 310 x x 350 350 x x x x 350 x x 396 396 x x x x 396 x x 446 446 x x x x 446 x x 496 496 x x x x 496 x x 556 556 x x x x 556 x x 310 310 310 47 x x x x 310 214 x x 350 350 x x x x 350 x x 396 396 x x x x 396 x x 446 446 x x x x 446 x x 496 496 x x x x 496 x x 556 5

33、56 x x x x 556 x x 626 626 x x x x 626 x x 350 350 350 47 x x x x 350 252 x x 396 396 x x x x 396 x x 446 446 x x x x 446 x x 496 496 x x x x 496 x x 556 556 x x x x 556 x x 626 626 x x x x 626 x x 706 706 x x x x 706 x x 396 396 396 60 x x x x 396 272 x x 446 446 x x x x 446 x x 496 496 x x x x 496

34、 x x 556 556 x x x x 556 x x 626 626 x x x x 626 x x 706 706 x x x x 706 x x 796 796 x x x x 796 x x 446 446 446 60 x x x x 446 322 x x 496 496 x x x x 496 x x 556 556 x x x x 556 x x 626 626 x x x 626 x x 706 706 x x x 706 x x 796 796 x x x 796 x x 896 896 x x x 896 x x 496 496 496 60 x x x x 496 3

35、72 x x 556 556 x x x x 556 x x 626 626 x x x x 626 x x 706 706 x x x x 706 x x 796 796 x x x x 796 x x 896 896 x x x x 896 x x 996 996 x x x x 996 x xBSISO6753-2:1998 6 BSI 05-1999Table 2 Dimensions of ejector plates and risers Table 3 Tolerances, limit deviations and surface roughness Sizes of plat

36、es Risers Ejector plates Outside dimensions Thickness, t 2 Outside dimensions Thickness, t 3 l 2 l 1 l 1 b 25 32 40 50 63 80 100 125 160 l 1 b 1 8 10 12,5 16 20 25 32 40 50 556 556 556 74 x x x x 556 404 x x 626 626 x x x x 626 x x 706 706 x x x x 706 x x 796 796 x x x x 796 x x 896 896 x x x x 896

37、x x 996 996 x x x x 996 x x 1116 1116 x x x 1116 x x 626 626 626 74 x x x 626 474 x x 706 706 x x x 706 x x 796 796 x x x 796 x x 896 896 x x x 896 x x 996 996 x x x 996 x x 1116 1116 x x x 1116 x x 706 706 706 74 x x x 706 554 x x 796 796 x x x 796 x x 896 896 x x x 896 x x 996 996 x x x 996 x x 11

38、16 1116 x x x 1116 x x 796 796 796 74 x x 796 644 x x 896 896 x x 896 x x 996 996 x x 996 x 1116 1116 x x 1116 x x 896 896 896 74 x x 896 744 x x 996 996 x x 996 x x 1116 1116 x x 1116 x x Plate Surface roughness, Ra, for l 1 , l 2 , t 1 , t 2 , t 3 4m Limit deviations for l 1 , l 2 mm Limit deviati

39、ons for t 1 , t 2 , t 3 mm Perpendicularity on 100mm measurement length a mm Parallelism on 100mm measurement length a mm Class I, forfinishedplates 0,8 +0,4 +0,2 +0,05 0 0,02 0,02 Class II, forprefinished plates 3,2 +0,4 +0,2 +0,5 +0,3 0,04 0,04 a These limit deviations apply for 100mm. For length

40、100mm, the limit deviations shall be multiplied by the values for l 1or l 2 10 2 . For example, for a plate l 2= 556mm, the limit deviations for parallelism are calculated as follows: (556 10 2 ) 0,02 (forclass I) = 0,11mm. For length 100mm the values given in Table 3 apply. They remain unchanged.7

41、blankBS ISO 6753-2:1998 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisio

42、ns BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambigui

43、ty while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automati

44、cally receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI impl

45、ementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic in

46、formation services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards

47、. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior w