BS ISO 702-1-2009 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Conical connection《机床 主轴端头与工作夹持头的连接尺寸规格 锥形连接》.pdf

1、BSISO702-1:2009ICS25.060.20NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBY COPYRIGHTLAWBRITISHSTANDARDMachinetoolsConnectingdimensionsofspindlenosesandworkholdingchucksPart1:ConicalconnectionIncorporating corrigendumAugust 2015This British Standardwas publishedundertheauthorityofthe StandardsPolicy

2、 and StrategyCommittee on 31 August2009ISBN9780580914348Amendments/corrigenda issued sincepublicationDate CommentsBS ISO 702-1:2009National forewordThis British Standard is the UK implementationofISO 702-1:2009.The UK participation in its preparation was entrusted by TechnicalCommitteeMTE/1,Machinet

3、ools, to MTE/1/2, Machine tools Accuracy.A list of organizations represented on this subcommittee can be obtainedThis publication does not purport to include all the necessary provisionsof acontract. Users areresponsible for itscorrect application.Compliance withaBritish Standard cannotconfer immuni

4、tyfrom legal obligations.on requesttoitssecretary. The British Standards Institution 2015.Published by BSI Standards Limited 201531 August 2015 Implementation of ISO corrected text1 October 2009. Tables 1 and 2 updatedReference numberISO 702-1:2009(E)ISO 2009INTERNATIONAL STANDARD ISO702-1Third edit

5、ion2009-07-15Corrected version2009-10-01Machine tools Connecting dimensions of spindle noses and work holding chucks Part 1: Conical connection Machines-outils Dimensions dassemblage des nez de broche et des mandrins porte-pices Partie 1: Assemblage conique ISO 702-1:2009(E) PDF disclaimer This PDF

6、file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein t

7、he responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF

8、-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT I

9、SO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in th

10、e country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2009 All rights reservedBS ISO 702-1:2009ISO 702-1:2009(E) ISO 2009 All rights reserved iiiForeword

11、ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical

12、committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of elect

13、rotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the

14、member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for ident

15、ifying any or all such patent rights. ISO 702-1 was prepared by Technical Committee ISO/TC 39, Machine tools, Subcommittee SC 8, Work holding spindles and chucks. This third edition cancels and replaces the second edition (ISO 702-1:2001), Tables 1 and 2 and Figures 1 and 2 of which have been techni

16、cally revised. ISO 702 consists of the following parts, under the general title Machine tools Connecting dimensions of spindle noses and work holding chucks: Part 1: Conical connection Part 2: Camlock type Part 3: Bayonet type Part 4: Cylindrical connection In this corrected version of ISO 702-1:200

17、9, the “” (minus) sign has been deleted from the zero values of tolerance of d1in Table 1 and footnote “c” of Table 2 has been corrected to read “Type A1” and “Type A2”. BS ISO 702-1:2009BS ISO 702-1:2009INTERNATIONAL STANDARD ISO 702-1:2009(E) ISO 2009 All rights reserved 1Machine tools Connecting

18、dimensions of spindle noses and work holding chucks Part 1: Conical connection 1 Scope This part of ISO 702 specifies the sizes for interchangeability of conical spindle noses and corresponding connecting faces of face plates or work holding chucks. NOTE The “camlock type”, “bayonet type” and “cylin

19、drical connection” are specified in ISO 702-2, ISO 702-3 and ISO 702-4, respectively. 2 Interchangeability In this part of ISO 702, all dimensions and tolerances are expressed in millimetres. Although there are differences in the values of dimensions and assembly screws in metric and inch series, th

20、e connecting dimensions in Tables 1 and 2 allow for interchangeability between metric- and inch-based chucks (see also footnote “a” in Table 2). 3 Sizes for interchangeability 3.1 Spindle noses See Figure 1 and Table 1. Type A1: Two bolt circles of diameter d2and d3; Type A2: One outer bolt circle o

21、f diameter d3(Type A2 for Nos. 3 and 4; types A1 and A2 for Nos. 5 to 28). BS ISO 702-1:2009ISO 702-1:2009(E) 2 ISO 2009 All rights reservedFigure 1 (continued) BS ISO 702-1:2009ISO 702-1:2009(E) ISO 2009 All rights reserved 3Key 1 size No. 3 2 size No. 4 3 size Nos. 5 to 11 4 size Nos. 15 to 28 aAl

22、l fixing holes. Figure 1 Spindle noses BS ISO 702-1:2009ISO 702-1:2009(E) 4 ISO 2009 All rights reservedTable 1 Dimensions of spindle noses No. Dimension 3 4 5 6 8 11 15 20 28 nom. 53,975 63,513 82,563 106,375 139,719 196,869 285,775 412,775 584,225 d1tol.0,0080+0,0080+0,0100+0,0100+0,0120+0,0140+0,

23、0160+0,0200+0,0230+d2 61,9 82,6 111,1 165,1 247,6 368,3 530,2 d370,6 82,6 104,8 133,4 171,4 235 330,2 463,6 647,6 d492 108 133 165 210 280 380 520 725 d5M10 M10 M10 M12 M16 M20 M24 M24 M30 d6H8/h8 14,25 15,9 19,05 23,8 28,6 34,9 41,3 50,8 l1(Type A1) 00,025 14,288 15,875 17,462 19,050 20,638 22,225

24、25,400 l1(Type A2) 11 11 13 14 16 18 19 21 24 l216 20 22 25 28 35 42 48 56 l3 5 5 5 6 8 8 8 8 l414 17 19 22 25 32 37 42 50 w and x 0,2 0,2 0,2 0,2 0,2 0,2 0,3 0,3 0,3 NOTE The general tolerance for untoleranced dimensions is 0,4 mm. BS ISO 702-1:2009ISO 702-1:2009(E) ISO 2009 All rights reserved 53.

25、2 Connecting face dimensions See Figure 2 and Table 2. a) With inner bolt circle (for mounting on spindle nose A1 by means of its inner bolt circle) b) With outer bolt circle (for mounting on spindle nose A1, or spindle nose A2 by means of its outer bolt circle) Figure 2 Connecting face dimensions B

26、S ISO 702-1:2009ISO 702-1:2009(E) 6 ISO 2009 All rights reservedTable 2 Connecting face dimensions No. Dimension 3 4 5 6 8 11 15 20 28 d153,975 63,513 82,563 106,375 139,719 196,869 285,775 412,775 584,225 tol. Type 1 a0,0030,005+0,0030,005+0,0040,006+0,0040,006+0,0040,008+0,0040,010+0,0040,012+0,00

27、50,015+0,0060,017+tol. Type 2 a0,0080+0,0080+0,0100+0,0100+0,0120+0,0140+0,0160+0,0200+0,0300+d2 61,9 82,6 111,1 165,1 247,6 368,3 530,2 d370,6 82,6 104,8 133,4 171,4 235 330,2 463,6 647,6 d492 108 133 165 210 280 380 520 725 d512 12 12 14 18 22 25,5 b27 b33 d60,10+ 14,7 16,3 19,45 24,2 29,4 35,7 42

28、,1 51,6 l1(Type A1) 0,0250+ 14,288 15,875 17,462 19,050 20,638 22,225 25,400 l1min.(Type A2) c 15 16 18 20 21 23 26 l210 10 12 13 14 16 17 19 22 l3 6,5 6,5 6,5 8 10 10 10 10 w and x 0,2 0,2 0,2 0,2 0,2 0,2 0,3 0,3 0,3 NOTE The general tolerance for untoleranced dimensions is 0,4 mm. aType identifica

29、tion shall be marked. bThese are compromise dimensions to allow for interchangeability between inch and metric chucks. cl1of Type A1 may be used in place of l1of Type A2 only if the face plate is rigid enough not to cause bending when the screws are tightened on the inner bolt circle. BS ISO 702-1:2

30、009BS ISO 702-1:2009ISO 702-1:2009(E) ICS 25.060.20 Price based on 6 pages ISO 2009 All rights reserved BS ISO 702-1:2009BS ISO 702-1:2009This page has been intentionally left blank BSI is the national body responsible for preparing British Standards and other standards-related publications, informa

31、tion and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government

32、, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all

33、 sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying stan

34、dardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard co

35、pies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and ad

36、opted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format,

37、by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, plea

38、se visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .Revisi

39、onsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre

40、.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed

41、 such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior writ

42、ten permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW