BS ISO 7739-2016 Cinematography Two-track photographic analogue sound records on 16 mm motion-picture prints Positions and width dimensions《电影 16mm电影拷贝上两轨道摄影模拟声音记录 位置和宽度尺寸》.pdf

1、BS ISO 7739:2016Cinematography Two-trackphotographic analogue soundrecords on 16 mm motion-picture prints Positions andwidth dimensionsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 7739:2016 BRITISH STANDARDNational forewordThis British Standard is the UK im

2、plementation of ISO 7739:2016.The UK participation in its preparation was entrusted to TechnicalCommittee CPW/36, Cinematography.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions o

3、f a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 91746 2ICS 37.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under t

4、he authority of theStandards Policy and Strategy Committee on 31 July 2016.Amendments issued since publicationDate Text affectedBS ISO 7739:2016 ISO 2016Cinematography Two-track photographic analogue sound records on 16 mm motion-picture prints Positions and width dimensionsCinmatographie Enregistre

5、ment de deux pistes sonores optiques analogues sur copies dexploitation cinmatographiques 16 mm Positions et dimensions en largeurINTERNATIONAL STANDARDISO7739Second edition2016-07-01Reference numberISO 7739:2016(E)BS ISO 7739:2016ISO 7739:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DO

6、CUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior writte

7、n permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 7739:2016ISO

8、 7739:2016(E)Foreword iv1 Scope . 12 Normative references 13 Positions and dimensions . 14 Sound records 15 Picture-sound displacement 16 Track usage 1 ISO 2016 All rights reserved iiiContents PageBS ISO 7739:2016ISO 7739:2016(E)ForewordISO (the International Organization for Standardization) is a w

9、orldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented

10、on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this

11、 document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Dir

12、ectives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the devel

13、opment of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO s

14、pecific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 36, Cinematograp

15、hy.This second edition cancels and replaces the first edition (ISO 7739:1983), of which it constitutes a minor revision.iv ISO 2016 All rights reservedBS ISO 7739:2016INTERNATIONAL STANDARD ISO 7739:2016(E)Cinematography Two-track photographic analogue sound records on 16 mm motion-picture prints Po

16、sitions and width dimensions1 ScopeThis International Standard specifies the lateral positions and width dimensions of two-track variable area sound records on 16 mm motion-picture prints.This International Standard also specifies the area scanned by the sound reproducer.2 Normative referencesThe fo

17、llowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4243, Cine

18、matography Picture image area and photographic sound record on 16 mm motion-picture release prints Positions and dimensions3 Positions and dimensionsThe positions and dimensions of the two sound records shall be as shown in Figure 1 and given in Table 1. In all other respects, the sound records shal

19、l comply with ISO 4243.4 Sound records4.1 Channel 1 and channel 2 recording and reproducing slit images shall be positioned in line at an angle 90 5 to the reference edge of the film.4.2 Channel 2 shall be recorded in the record nearest the outer edge of the film, as shown in Figure 1.4.3 The septum

20、 between channel records shall be effectively opaque on prints.A lighter septum resulting from direct positive recordings being printed on reversal print materials should not be cause for rejection of prints.5 Picture-sound displacementThe picture-sound displacement shall be as specified in ISO 4243

21、.6 Track usageThe two tracks specified in this International Standard may be used for either related stereophonic material or unrelated material. When used for two-channel stereophonic program material, track 1 shall be used for the left (as viewed from the auditorium) loudspeaker channel and track

22、2 shall be used for the right (as viewed from the auditorium) loudspeaker channel.It is recommended that the container and leader of the print having two sound records be labelled with the above information. ISO 2016 All rights reserved 1BS ISO 7739:2016ISO 7739:2016(E)Dimensions B and C were chosen

23、 to ensure separation of channel 1 and channel 2 signals upon reproduction. Projector manufacturers will probably want to reduce the guard band between channel 1 and channel 2 scanned areas as much as possible so that the projector will be fully compatible with sound records bearing a single channel

24、 and made in accordance with ISO 4243. However, the crosstalk between them should not be less than 20 dB for stereophonic material, and not less than 26 dB for unrelated material.12345Key1 track 12 track 23 reference edge4 direction of film travel5 area scanned by reproducerFigure 1 Two photographic

25、 sound tracks on 16 mm motion-picture prints2 ISO 2016 All rights reservedBS ISO 7739:2016ISO 7739:2016(E)Table 1 DimensionsDimension mm inA ref. 13,71 0,540B 14,35 0,05 0,565 0,002C 14,60 0,05 0,575 0,002D ref. 15,24 0,600E ref. 14,48 0,03 0,570 0,001F max. 0,05 0,002G ref. 1,80 0,071 ISO 2016 All

26、rights reserved 3BS ISO 7739:2016ISO 7739:2016(E) ISO 2016 All rights reservedICS 37.060.20Price based on 3 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporate

27、d by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standard

28、s -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide

29、 you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted Eur

30、opean and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content

31、in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Sav

32、e for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and

33、 using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that o

34、nly 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format

35、to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce co

36、ntent from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55

37、,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and su

38、bscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits

39、of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further informa

40、tion, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform t

41、he Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20