BS ISO 7879-1998 Diesel engines - Cradle mounted in-line fuel injection pumps - Mounting dimensions《柴油发动机 托架安装直列式燃料喷射泵 安装尺寸》.pdf

1、BRITISH STANDARD BS ISO 7879:1997 Diesel engines Cradle mounted in-line fuel injection pumps Mounting dimensions ICS43.060.40BSISO 7879:1997 This British Standard, having been prepared under the directionof the Engineering SectorBoard, was published underthe authority of the Standards Board and come

2、s intoeffect on 15 March 1998 BSI 04-1999 ISBN 0 580 29313 0 National foreword This British Standard reproduces verbatim ISO7879:1997 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee MCE/22, Engines for road vehicles, which h

3、as the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in

4、 the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitle

5、d “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance

6、 with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO title page, pages ii to iv, pages1 to4 and a back cover. This standard has been updated (see copyright date) and m

7、ay have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSISO7879:1997 BSI 04-1999 i Contents Page National foreword Inside front cover Foreword iii Test of ISO7879 1ii blankBSISO 7879:199

8、7 ii BSI 04-1999 Contents Page Foreword iii 1 Scope 1 2 Dimensions and tolerances 1 3 Other dimensions and specifications 2 Annex A (informative) Bibliography 4 Figure 1 Cradle-mounted in-line fuel injection pumpType1 1 Figure 2 Cradle-mounted in-line fuel injection pumpType2 2 Figure 3 Cradle-mount

9、ed in-line fuel injection pumpType3 3BSISO7879:1997 BSI 04-1999 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technica

10、l committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely wit

11、h the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least75% of the

12、 member bodies casting a vote. International Standard ISO7879 was prepared by Technical Committee ISO/TC22, Road vehicles, Sub-committee SC7, Injection equipment and filters for use on road vehicles. This third edition cancels and replaces the second edition (ISO7879:1990), of which it constitutes a

13、 minor revision. Annex A of this International Standard is for information only. Descriptors: Road vehicles, motor vehicles, internal combustion engines, diesel engines, injection pumps, form specifications, dimensions, mounting dimensions.iv blankBSISO7879:1997 BSI 04-1999 1 1 Scope This Internatio

14、nal Standard specifies the dimensional requirements of cradle-mounted in-line fuel injection pumps for compression-ignition (diesel) engines. 2 Dimensions and tolerances See Figure 1, Figure 2 and Figure 3. Figure 1 Cradle-mounted in-line fuel injection pumpType1BSISO 7879:1997 2 BSI 04-1999 3 Other

15、 dimensions and specifications Dimensions and requirements not given in this International Standard are left to the manufacturerss choice. Figure 2 Cradle-mounted in-line fuel injection pumpType2BSISO7879:1997 BSI 04-1999 3 Figure 3 Cradle-mounted in-line fuel injection pumpType3BSISO 7879:1997 4 BS

16、I 04-1999 Annex A (informative) Bibliography 1 ISO6519:1993, Diesel engines Fuel injection pumps Tapers for shaft ends and hubs. 2 ISO7299:1996, Diesel engines End-mounting flanges for fuel injection pumps. 3 ISO7612:1994, Diesel engines Base-mounted in-line fuel injection pumps Mounting dimensions.

17、blankBS ISO 7879:1997 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions

18、 BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity

19、 while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatica

20、lly receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implem

21、entation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic info

22、rmation services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards.

23、For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Co

24、pyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing t

25、he standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.