1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Family T (Turbines) Specification for lubricating oils for turbinesICS 75.100Lubricants, industrial
2、 oils and related products (class L) BRITISH STANDARDBS ISO 8068:2006BS ISO 8068:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 December 2006 BSI 2006ISBN 0 580 49884 0Amendments issued since publicationAmd. No. Date Commentscontract.
3、 Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of ISO 8068:2006. The UK participation in its preparation was entrusted to Tech
4、nical Committee PTI/7, Lubricants and process fluids.A list of organizations represented on PTI/7 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a Reference numberISO 8068:2006(E)INTERNATIONAL STANDARD ISO8068Second edition200
5、6-09-15Lubricants, industrial oils and related products (class L) Family T (Turbines) Specification for lubricating oils for turbines Lubrifiants, huiles industrielles et produits connexes (classe L) Famille T (Turbines) Spcifications pour les huiles lubrifiantes pour turbines BS ISO 8068:2006ii iii
6、Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Sampling 4 4 Requirements for turbine oils 4 5 Specification tables 5 Bibliography . 16 BS ISO 8068:2006iv Foreword IISO (the International Organization for Standardization) is a worldwide federation of national standa
7、rds bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organ
8、izations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given i
9、n the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 %
10、 of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8068 was prepared by Technical Committee ISO/TC 28, Petrole
11、um products and lubricants, Subcommittee SC 4, Classifications and specifications. This second edition cancels and replaces the first edition (ISO 8068:1987), which has been technically revised. ISO 8068:1987 is only dealing with the specifications of TSA and TGA categories of turbine oils. This new
12、 edition gives specifications for all the turbine oil categories described in ISO 6743-5:2006. BS ISO 8068:2006vIntroduction New turbine technologies have emerged in recent years leading to the changes in lubricant requirements. For example, the development of single shaft combined cycle turbines ha
13、s resulted in the use of a common lubrication system for both the gas and steam turbine. The lubricant should therefore meet the requirements for the lubrication of both pieces of equipment. The growing concern regarding the environmental behaviour of lubricants is also leading to the use of biodegr
14、adable products when there are risks of leakage into soil or surface water. This is particularly the case with hydraulic power plants and lubricants in this application should demonstrate a low ecotoxicity. BS ISO 8068:2006blank1Lubricants, industrial oils and related products (class L) Family T (Tu
15、rbines) Specification for lubricating oils for turbines WARNING The handling and use of products as specified in this International Standard can be hazardous, if suitable precautions are not observed. This International Standard does not purport to address all of the safety problems associated with
16、its use. It is the responsibility of the users of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1 Scope This International Standard specifies the minimum requirements for turbine lubricants, as delivered. It
17、 specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turbines, combined-cycle turbines with a common lubrication system and hydraulic (water driven) turbines. This International Standard does not specify the requirements for wind turbines, wh
18、ich are dealt with in ISO 12925-14. Whilst power generation is the primary application for turbines, steam and gas turbines can also be used to drive rotating equipment, such as pumps and compressors. The lubrication systems of these driven loads can be common to that of the turbine. Turbine install
19、ations incorporate complex auxiliary systems requiring lubrication, including hydraulic systems, gearboxes and couplings. Depending upon the design and configuration of the turbine and driven equipment, turbine lubricants can also be used in these auxiliary systems. This International Standard shoul
20、d be read in conjunction with ISO 6743-52, the classification of different turbine lubricant types. The following lubricants are considered in this International Standard: mineral oils; synthetic lubricants, ester and polyalphaolefin types intended for high-temperature gas turbines; synthetic lubric
21、ants, ester and polyalphaolefin types, environmentally acceptable for use in hydraulic turbines; fire-resistant phosphate-ester type lubricants. NOTE For the purposes of this International Standard, the term “% (m/m)” is used to represent the mass fraction. 2 Normative references The following refer
22、enced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. BS ISO 8068:20062 ISO 760, Determination of water Karl Fischer metho
23、d (General method) ISO 2049, Petroleum products Determination of colour (ASTM scale) ISO 2160, Petroleum products Corrosiveness to copper Copper strip test ISO 2592, Determination of flash and fire points Cleveland open cup method ISO 2719, Determination of flash point Pensky-Martens closed cup meth
24、od ISO 2909, Petroleum products Calculation of viscosity index from kinematic viscosity. ISO 3016, Petroleum products Determination of pour point ISO 3104, Petroleum product Transparent and opaque liquids Determination of kinematic viscosity and calculation of dynamic viscosity ISO 3170, Petroleum l
25、iquids Manual sampling ISO 3448, Industrial liquid lubricants ISO viscosity classification ISO 3675, Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method ISO 4259, Petroleum products Determination and application of precision data in relation to methods
26、 of test ISO 4263-1, Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils ISO 4263-3, Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 3: Anhydrou
27、s procedure for synthetic hydraulic fluids ISO 4406, Hydraulic fluid power Fluids Method for coding the level of contamination by solid particles ISO 6072, Hydraulic fluid power Compatibility between fluids and standard elastomeric materials ISO 6247, Petroleum products Determination of foaming char
28、acteristics of lubricating oils ISO 6296, Petroleum products Determination of water Potentiometric Karl Fischer titration method ISO 6341, Water quality Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) Acute toxicity test ISO 6614, Petroleum products Det
29、ermination of water separability of petroleum oils and synthetic fluids ISO 6618, Petroleum products and lubricants Determination of acid or base number Colour-indicator titration method ISO 6619, Petroleum products and lubricants Neutralization number Potentiometric titration method ISO 7120, Petro
30、leum products and lubricants Petroleum oils and other fluids Determination of rust-preventing characteristics in the presence of water ISO 7346-2, Water quality Determination of the acute lethal toxicity of substances to a freshwater fish Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae) P
31、art 2: Semi-static method ISO 7537, Petroleum products Determination of acid number Semi-micro colour-indicator titration method BS ISO 8068:20063ISO 7624, Petroleum products and lubricants Inhibited mineral turbine oils Determination of oxidation stability ISO 8192, Water quality Test for inhibitio
32、n of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation ISO 9120, Petroleum and related products Determination of air-release properties of steam turbine and other oils Impinger method ISO 9439, Water quality Evaluation of ultimate aerobic biodegradability of organic comp
33、ounds in aqueous medium Carbon dioxide evolution test ISO 12185, Crude petroleum and petroleum products Determination of density Oscillating U-tube method ISO 12937, Petroleum products Determination of water Coulometric Karl Fischer titration method ISO 13357-1, Petroleum products Determination of t
34、he filterability of lubricating oils Part 1: Procedure for oils in the presence of water ISO 13357-2, Petroleum products Determination of the filterability of lubricating oils Part 2: Procedure for dry oils ISO 14593, Water quality Evaluation of ultimate aerobic biodegradability of organic compounds
35、 in aqueous medium Method by analysis of inorganic carbon in sealed vessels (CO2headspace test) ISO 14635-1, Gears FZG test procedures Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils ISO 14935, Petroleum and related products Determination of wick flame persisten
36、ce of fire-resistant fluids ISO 20764, Petroleum and related products Preparation of a test portion of high-boiling liquids for the determination of water content Nitrogen purge method ISO 20823, Petroleum and related products Determination of the flammability characteristics of fluids in contact wi
37、th hot surfaces Manifold ignition test ASTM D2272-02, Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel ASTM D 2711-01a, Standard Test Method for Demulsibility Characteristics of Lubricating Oils ASTM D 2893, Standard Test Method for Oxidation Characteris
38、tics of Extreme-Pressure Lubrication Oils ASTM D 4636, Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils ASTM D 6081, Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and
39、 Results Interpretation EN 14832, Petroleum and related products Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids EN 14833, Petroleum and related products Determination of hydrolytic stability of fire-resistant phosphate ester fluids DIN 51554-3, Test
40、ing of mineral oils Test of susceptibility to ageing according to Baader Testing at 95 C BS ISO 8068:20064 3 Sampling Unless otherwise specified in commodity specifications, samples shall be drawn in accordance with ISO 3170. 4 Requirements for turbine oils Fluids, when tested under the prescribed m
41、ethods, shall be in accordance with the limits set out in Tables 3 to 11, depending on the type. The appearance of the delivered oils shall be clear and bright and free of any visible particulate matter, under visible light at ambient temperature. These oils shall not contain any viscosity-index imp
42、rover. Most of the test methods specified in the tables contain a precision statement. In cases of dispute, the procedure described in ISO 4259 shall apply. Water content is specified using ISO 760, ISO 6296, ISO 12937 or ISO 20764. In case of dispute, ISO 20764 shall be used. The elastomer compatib
43、ility index shall be determined according to ISO 6072 under the conditions listed in Table 1, according to the product category. Table 2 gives guidelines on acceptable changes of properties. Other elastomers and other limits may be used or specified by the end user depending on the purpose and condi
44、tions of actual use. In addition, the turbine oil shall be compatible with all material constituents of the lubricating system. Table 1 Test conditions according to ISO 6072 for the determination of the elastomer compatibility index Fluid Symbol (ISO 6743-52) Suitable elastomer Test temperature 1 C
45、Examples of test duration a 2 h NBR 1,2 100 HNBR 1 130 Mineral oils TSA, TGA, TSE, TGE, TGB, TGSB, TGF, TGSE, THA, THE FKM 2 150 168 1 000 NBR 1,2 60 HNBR 1 100 Synthetic esters TGCE THCE FKM 2 100 168 1 000 NBR 1,2 100 HNBR 1 130 Synthetic hydrocarbons TGCH THCH FKM 2 150 168 1 000 FKM 2 150 Aryl p
46、hosphate ester TSD TGD EPDM 1 130 168 1 000 aThe test duration of 1 000 h is recommended for evaluation of elastomer compatibility with fluids which cause longer term changes to the elastomer. BS ISO 8068:20065Table 2 Guidelines on acceptable changes of properties, according to ISO 6072 Immersion ti
47、me h Maximum volume swell % Maximum volume shrinkage % Hardness change IRHD Maximum tensile stress change % Maximum elongation change% 168 15 4 8 20 20 1 000 20 5 10 50 50 5 Specification tables 5.1 Specification for TSA and TGA turbine oils These lubricants are mineral oils with suitable antioxidan
48、ts and corrosion inhibitors, for the lubrication of steam turbines and gas turbines (normal service). Specifications are given in Table 3. 5.2 Specification for TSE and TGE turbine oils These lubricants are TSA and TGA types turbine oils, with additional extreme-pressure performance to lubricate gea
49、r systems. Specifications are given in Table 4. 5.3 Specification for TGB and TGSB turbine oils These lubricants are mineral oils or synthetic-base stocks with suitable antioxidants and corrosion inhibitors. These oils shall withstand higher temperatures and exhibit higher thermal stability than TSA and TGA oil types. The TGSB type shall fulfil the requirements
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1