BS ISO IEC 10641-1993 Information technology - Computer graphics and image processing - Conformance testing of implementations of graphics standards《信息技术 计算机制图和图象处理 图形标准实施的一致性试验》.pdf

1、BRITISH STANDARD BS ISO/IEC 10641:1993 Implementation of ISO/IEC 10641:1993 Information technology Computer graphics and image processing Conformance testing of implementations of graphics standards UDC 681.3.01:681.3.04(084)BSISO/IEC 10641:1993 This British Standard, having been prepared under the

2、directionof the Information Systems Technology Standards Policy Committee, was published under the authority of the Standards Board and comes intoeffect on 15 November 1993 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference IST/31 Draft for comment 91/6

3、3775 DC ISBN 0 580 22599 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Information Systems Technology Standards Policy Committee (IST/-) to Technical Committee IST/31, upon which the following bodies were represented: Department of T

4、rade and Industry It Standards Unit (Itd6a) Department of Trade and Industry (National Engineering Laboratory) Information Systems Committee of the Universities Funding Council Rutherford Appleton Laboratory Amendment issued since publication Amd. No. Date CommentsBSISO/IEC 10641:1993 BSI 02-2000 i

5、Contents Page Committees responsible Inside front cover National foreword ii Foreword iv Text of ISO/IEC 10641 1BSISO/IEC 10641:1993 ii BSI 02-2000 National foreword This British Standard reproduces verbatim ISO/IEC 10641:1993 and implements it as the UK national standard. This British Standard is p

6、ublished under the direction of the Information Systems Technology Standards Policy Committee whose Technical Committee IST/31 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change,

7、 and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, Publications, BSI, Linford Wood, Milton Keynes, MK14 6LE. A British S

8、tandard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cov

9、er, an inside front cover, pages i and ii, theISO/IEC title page, pages ii to iv, pages 1 to 21 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO/IEC 10641:1993(E

10、) ii BSI 02-2000 Contents Page Foreword iv Introduction 1 1 Scope 1 2 Normative references 1 3 Definitions 3 4 Overview 5 4.1 Conformance testing 5 4.2 Graphics conformance testing 5 4.2.1 The impact of registration 6 4.2.2 Interfaces in computer graphics conformance testing 6 4.3 The testing proces

11、s 7 5 Conformance testing requirements within graphics standards 8 6 Graphics test suite 10 6.1 Test software 10 6.1.1 Determination of testing domain 11 6.1.2 Structure of a test suite 11 6.1.3 Maintenance of a test suite 11 6.1.4 Portability of test software 12 6.1.5 Language bindings and encoding

12、s 12 6.2 Test documentation 12 6.2.1 Test Requirements document 12 6.2.2 Test Specifications document 13 6.2.3 Test suite and documentation 14 7 Graphics test service 14 7.1 Procedures and guidelines 14 7.1.1 Acceptance of a test suite 14 7.1.2 Establishment of test procedures 14 7.1.2.1 Testing Con

13、trol Board 15 7.1.2.2 Testing Control Board procedures 15 7.1.2.3 Applying for testing 15 7.1.2.4 Testing procedures 16 7.1.2.5 Preparation of the test report 17 7.1.2.6 Confidentiality 17 7.1.2.7 Documentation 17 7.1.2.8 Archiving of records 17 7.1.2.9 Checklists 17 7.2 Adoption of a test report fo

14、rmat 17 7.3 Issue of licences 18 7.4 Maintenance requirements 18 8 Establishing a test service 18 8.1 Components of a test service 18 8.1.1 The testing laboratory 18 8.1.2 Accreditation body 18 8.1.3 Certification body 18 8.1.4 Testing support service 19 8.1.5 Client 19 8.2 Harmonisation of test ser

15、vices 19ISO/IEC 10641:1993(E) BSI 02-2000 iii Page Annex A (informative) Overview of the testing process 20 Annex B (informative) Overview of test suite development process 21 Figure 1 External Interfaces 7 Figure 2 Reference Model 8 Figure A.1 20 Figure B.1 21ISO/IEC 10641:1993(E) iv BSI 02-2000 Fo

16、reword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technica

17、l committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part i

18、n the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval

19、 by at least 75% of the national bodies casting a vote. International Standard ISO/IEC 10641 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Sub-Committee SC 24, Computer graphics and image processing. Annex A and Annex B of this International Standard are for inform

20、ation only.ISO/IEC 10641:1993(E) BSI 02-2000 1 Introduction This International Standard addresses conformance testing of implementations of graphics standards. Conformance testing is the method used to determine the adherence or non-adherence of an implementation under test (IUT) to a standard. This

21、 International Standard specifies an approach for testing the conformance to computer graphics standards of products that claim to implement these standards. It addresses the conformance testing processes for all classes of graphics standards. This International Standard defines a general framework

22、of procedures and guidelines for conformance testing, together with definitions of terms and concepts. The framework given in this International Standard, together with the Test Requirements document for a particular graphics standard, provides a description of the procedures to be followed to achie

23、ve successful conformance testing of products for conformance to a particular graphics standard. The concept of conformance is central to every standard. The aims and benefits of a standard can be realized if there is a means of testing for conformance. The main reasons for introducing a document on

24、 conformance testing in the area of computer graphics are: To promote standards that are developed in a way such that products can be tested for conformance to the standards requirements; To promote that conformance is addressed in each standard; To promote test suites that are appropriately defined

25、 for testing products for conformance to all areas of the standard, and are of high quality; To promote test methods for similar standards that are developed in a consistent way; To promote conformance testing that is carried out in a consistent way throughout the international graphics community. U

26、sers of this International Standard include: Developers of graphics standards; Implementors of graphics standards; Developers of graphics test suites; Testing laboratories; Certification bodies; Accreditation bodies. Annex A and Annex B contain diagrams illustrating the relationships among the users

27、 of this International Standard and the information shared by them. 1 Scope This International Standard specifies a general framework for testing conformance to a computer graphics standard. The general framework described in this International Standard addresses the following six components: Confor

28、mance in the standard itself; Test Requirements document, defining what shall be tested for a computer graphics standard; Test Specifications document, addressing the test technique and the content of each test; Test method, defining the implementation of the Test Specification document, including t

29、he test software; Test procedures, defining the application of the test software, which consists of the procedures to be used in conformance testing; The establishment of test services. This International Standard is applicable to all standards within the scope of the subcommittee within ISO/IEC JTC

30、1 responsible for computer graphics and image processing. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are su

31、bject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO/IEC 7942:19

32、85, Information processing systems Computer graphics Graphical Kernel System (GKS) functional description. ISO/IEC 8632-1:1992, Information technology Computer graphics Metafile for the storage and transfer of picture description information Part 1: Functional specification. ISO/IEC 8632-2:1992, Inf

33、ormation technology Computer graphics Metafile for the storage and transfer of picture description information Part 2: Character encoding. ISO/IEC 8632-3:1992, Information technology Computer graphics Metafile for the storage and transfer of picture description information Part3: Binary encoding. IS

34、O/IEC 10641:1993(E) 2 BSI 02-2000 ISO/IEC 8632-4:1992, Information technology Computer graphics Metafile for the storage and transfer of picture description information Part 4: Clear text encoding. ISO/IEC 8651-1:1988, Information processing systems Computer graphics Graphical Kernel System (GKS) la

35、nguage bindings Part 1: FORTRAN. ISO/IEC 8651-2:1988, Information processing systems Computer graphics Graphical Kernel System (GKS) language bindings Part 2: Pascal. ISO/IEC 8651-3:1988, Information processing systems Computer graphics Graphical Kernel System (GKS) language bindings Part 3: Ada. IS

36、O/IEC 8651-4:1991, Information technology Computer graphics Graphical Kernel System (GKS) language bindings Part 4: C. ISO/IEC 8805:1988, Information processing systems Computer graphics Graphical Kernel System for Three Dimensions (GKS-3D) functional description. ISO/IEC 8806-1:1988, Information pr

37、ocessing Computer graphics Graphical Kernel System for Three Dimensions (GKS-3D) language bindings Part 1: FORTRAN. ISO/IEC 8806-4:, Information technology Computer graphics Graphical Kernel System for Three Dimensions (GKS-3D) language bindings Part 4: C 1) . ISO/IEC 9592-1:1989/Amd.1:1992, Informa

38、tion processing systems Computer graphics Programmers Hierarchical Interactive Graphics System (PHIGS) Part 1: Functional description Amendment 1. ISO/IEC 9592-2:1989/Amd.1:1992, Information processing systems Computer graphics Programmers Hierarchical Interactive Graphics System (PHIGS) Part 2: Arc

39、hive file format Amendment 1. ISO/IEC 9592-3:1989/Amd.1:1992, Information processing systems Computer graphics Programmers Hierarchical Interactive Graphics System (PHIGS) Part 3: Clear text encoding of archive file Amendment 1. ISO/IEC 9592-4:1992, Information processing systems Computer graphics P

40、rogrammers Hierarchical Interactive Graphics System (PHIGS) Part 4: Plus Lumiere und Surfaces, PHIGS PLUS. ISO/IEC 9593-1:1990, Information processing systems Computer graphics Programmers Hierarchical Interactive Graphics System (PHIGS) language bindings Part 1: FORTRAN. ISO/IEC 9593-3:1990, Inform

41、ation technology Computer graphics Programmers Hierarchical Interactive Graphics System (PHIGS) language bindings Part 3: Ada. ISO/IEC 9593-4:1992, Information technology Computer graphics Programmers Hierarchical Interactive Graphics System (PHIGS) language bindings Part 4: C. ISO/IEC 9636-1:1991,

42、Information technology Computer graphics Interfacing techniques for dialogues with graphical devices (CGI) Functional specification Part 1: Overview, profiles and conformance. ISO/IEC 9636-2:1991, Information technology Computer graphics Interfacing techniques for dialogues with graphical devices (C

43、GI) Functional specification Part 2: Control. ISO/IEC 9636-3:1991, Information technology Computer graphics Interfacing techniques for dialogues with graphical devices (CGI) Functional specification Part 3: Output. ISO/IEC 9636-4:1991, Information technology Computer graphics Interfacing techniques

44、for dialogues with graphical devices (CGI) Functional specification Part 4: Segments. ISO/IEC 9636-5:1991, Information technology Computer graphics Interfacing techniques for dialogues with graphical devices (CGI) Functional specification Part 5: Input and echoing. ISO/IEC 9636-6:1991, Information t

45、echnology Computer graphics Interfacing techniques for dialogues with graphical devices (CGI) Functional specification Part 6: Raster. ISO/IEC 9637-1:, Information technology Computer graphics Interfacing techniques for dialogues with graphical devices (CGI) Data stream binding Part 1: Character enc

46、oding 1) . ISO/IEC 9637-2:1992, Information technology Computer graphics Interfacing techniques for dialogues with graphical devices (CGI) Data stream binding Part 2: Binary encoding. ISO/IEC 11072:1992, Information technology Computer graphics Computer Graphics Reference Model. ISO/IEC Guide 2:1991

47、, General terms and their definitions concerning standardization and related activities. 1) To be published.ISO/IEC 10641:1993(E) BSI 02-2000 3 ISO/IEC Guide 23:1982, Methods of indicating conformity with standards for third-party certification systems. ISO/IEC Guide 25:1990, General requirements fo

48、r the competence of calibration and testing laboratories. ISO/IEC Guide 28:1982, General rules for a model third-party certification system for products. ISO/IEC Guide 45:1985, Guidelines for the presentation of test results. 3 Definitions For the purposes of this International Standard, the followi

49、ng definitions apply. 3.1 accreditation formal recognition that a testing laboratory is competent to carry out specific tests or specific types of tests 3.2 accreditation body a body which conducts and administers a laboratory accreditation system and grants accreditation 3.3 application programmer interface (API) standard a standard which provid