BS ISO IEC 14766-1997 Information technology - Telecommunications and information exchange between systems - Use of OSI applications over the internet transmission control protocol.pdf

1、BRITISH STANDARD BS ISO/IEC 14766:1997 Information technology Telecommunications and information exchange between systems Use of OSI applications over the Internet Transmission Control Protocol (TCP) ICS 35.100.01BSISO/IEC14766:1997 This British Standard, having been prepared under the directionof t

2、he DISC Board, waspublished under the authorityof the Standards Boardand comes into effect on 15 September 1997 BSI 09-1999 ISBN 0 580 27862 X National foreword This British Standard reproduces verbatim ISO/IEC 14766:1997 and implements it as the UK national standard. The UK participation in its pre

3、paration was entrusted to Technical Committee IST/6, Data communications, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informe

4、d; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number60000added to the old number. For instance, IEC27-1 ha

5、s been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may

6、be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Stand

7、ards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO/IEC title page, pages ii to iv, pages 1 and 2 and a

8、back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSISO/IEC14766:1997 BSI 09-1999 i Contents Page National forewo

9、rd Inside front cover Foreword iii Text of ISO/IEC 14766 1ii blankBSISO/IEC14766:1997 ii BSI 09-1999 Contents Page Foreword iii 1 Scope 1 2 Normative references 1 3 Mechanism for interconnecting OSI applications 1 Annex A (informative) Availability of RFCs 2 Figure 1 Functional diagram 1 Descriptors

10、: Data processing, information interchange, telecommunications, network interconnection, open systems interconnection, data transmission.BSISO/IEC14766:1997 BSI 09-1999 iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form

11、the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC tec

12、hnical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. D

13、raft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75%of the national bodies casting a vote. International Standard ISO/IEC 14766 was prepared by Joint Technical Co

14、mmittee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunications and information exchange between systems. Annex A of this International Standard is for information only.iv blankBSISO/IEC14766:1997 BSI 09-1999 1 1 Scope This International Standard defines a mechanism which allows

15、 OSI upper layers (all session, presentation, and application entities) to operate over the Internet Transmission Control Protocol (TCP) without being aware that they are running on a TCP/IP internetwork. It provides similar functionality to ISO/IEC Transport Protocol Class4. It does not provide a g

16、ateway facility between Internet and OSI applications. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subje

17、ct to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. 2.1 International

18、Standards ISO/IEC 8072:1996, Information technology Open Systems Interconnection Transport service definition. 2.2 Other references All references in this subclause were correct at the time of approval of this International Standard. The provisions of the referenced specifications, as indicated in t

19、his subclause, are valid within the context of this International Standard. The reference to a specification within this International Standard does not give it any further status within ISO/IEC; in particular, it does not give the referenced specification the status of an International Standard. RF

20、C 1006, ISO Transport Service on top of the TCP, Request for Comments 1006, May 1987, Internet Standard 35. 3 Mechanism for interconnecting OSI applications Figure 1 shows the connection between two OSI TS-Users operating in accordance with ISO/IEC8072via a TCP/IP based network. The adaptation which

21、 is bounded by the dotted lines is described in RFC1006(Internet Standard35). Systems, for which conformance to this International Standard is claimed, shall implement this adaptation mechanism when interconnecting OSI applications via Internet networks. Figure 1 Functional diagramBSISO/IEC14766:199

22、7 2 BSI 09-1999 Annex A (informative) Availability of RFCs RFCs are freely available in electronic format from numerous sources by using a variety of access mechanisms. For example, RFC 1006 may be obtained in ASCII text format by sending an e-mail message to the Internet Network Information Center

23、Directory and Database Services automated mail server at the address In the body of the message, include the following command: send rfc1006.txtblankBS ISO/IEC 14766:1997 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for pre

24、paring BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions

25、. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside

26、front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addresse

27、d to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of info

28、rmation on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967

29、048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI p

30、ublications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic

31、, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.