BS ISO IEC 19798-2017 Information technology Office equipment Method for the determination of toner cartridge yield for colour printers and multifunction devices that contain print.pdf

1、BS ISO/IEC 19798:2017Information technology Office equipment Methodfor the determination of tonercartridge yield for colourprinters and multi-functiondevices that contain printercomponentsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO/IEC 19798:2017 BRITISH S

2、TANDARDNational forewordThis British Standard is the UK implementation of ISO/IEC 19798:2017. It supersedes BS ISO/IEC 19798:2006 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee IST/3, IT Printers and Cartridges.A list of organizations represented on t

3、his committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 84294 8 I

4、CS 37.100.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO/IEC

5、 19798:2017Information technology Office equipment Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer componentsTechnologies de linformation quipements de bureau Mthode pour la dtermination du rendement de cartouche de toner pour

6、 les imprimantes couleur et pour les dispositifs multifonctionnels qui contiennent des composants dimprimantesINTERNATIONAL STANDARDISO/IEC19798Reference numberISO/IEC 19798:2017(E)Third edition2017-01 ISO/IEC 2017BS ISO/IEC 19798:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT I

7、SO/IEC 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written pe

8、rmission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 19798:2017(E)BS

9、 ISO/IEC 19798:2017ISO/IEC 19798:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Test parameters and conditions . 24.1 Set-up 24.2 Sample size . 34.3 Print mode 34.4 Print environment 44.5 Paper 44.6 Maintenance 54.7 Test files 54.8 End of life . 55 Te

10、st methodology 65.1 Testing procedure . 65.2 Procedure for handling a defective cartridge or printer . 65.2.1 General 65.2.2 Defective cartridge . 65.2.3 Defective printer 76 Determination of the yield value and declaration 76.1 Determination of the declared yield value 76.2 Test data reporting 86.3

11、 Declaration of the yield 8Annex A (informative) Examples of fade .10Annex B (informative) Flow chart 11Annex C (normative) Sample reporting form .13Annex D (normative) Optional method for comparison of colour to ISO/IEC 19752 .17Bibliography .19 ISO/IEC 2017 All rights reserved iiiContents PageBS I

12、SO/IEC 19798:2017ISO/IEC 19798:2017(E)ForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of I

13、nternational Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in lia

14、ison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part

15、 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the

16、 elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations re

17、ceived (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO

18、s adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.The committee responsible for this document is ISO/IEC JTC 1, Information technology, SC 28, Office equipment.This third edition cancels and

19、 replaces the second edition (ISO/IEC 19798:2007), of which it constitutes a minor revision with the following changes: The definitions for 3.1, 3.2, 3.3 and 3.4 have been aligned with ISO/IEC 19752:2016. For the sample size in 4.2 at least has been inserted. 4.8 has been added as a subclause contai

20、ning information previously given in notes to entry in 3.5; ISO 29142-1 has been added to the Bibliography.iv ISO/IEC 2017 All rights reservedBS ISO/IEC 19798:2017ISO/IEC 19798:2017(E)IntroductionThe purpose of this document is to provide a process for determining the cartridge page yield for a give

21、n colour electrophotographic print system (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) using a standard office consumer type test suite. This test suite is not focused on printing of photographs, but is intended to be a sampling of typical office consumer pages. I

22、n the case where a cartridge set can be used in multiple printer models, only one yield test needs to be performed as long as the difference between printer models does not impact yield.NOTE A cartridge supplier can choose to use more than one market identifier for a single physical cartridge. In th

23、is case, only one yield test is required as long as there are no differences in the cartridges other than market identifiers.This document prescribes the following: the test method that manufacturers, test labs, etc. use to determine cartridge yield; the method for determination of declared yield va

24、lues from the test results; the appropriate method of describing the yield of cartridges in the documentation supplied to the consumer by the manufacturer.The cartridge yield is determined by an end of life judgment, or signalled with either of two phenomena: fade caused by depletion of the useable

25、toner in the cartridge or automatic printing stop caused by a toner out detection function.This document will be used for the measurement of one of the contributions to cost per page (CPP). This document does not directly measure CPP, only the yield of the magenta, cyan, yellow and black toner cartr

26、idges. In most cases, these are not the only contributors to the CPP. It is beyond the scope of this document to provide a methodology for calculation of CPP. ISO/IEC 2017 All rights reserved vBS ISO/IEC 19798:2017BS ISO/IEC 19798:2017Information technology Office equipment Method for the determinat

27、ion of toner cartridge yield for colour printers and multi-function devices that contain printer components1 ScopeThe scope of this document is limited to evaluation of toner cartridge page yield for toner-containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoco

28、nductor) for colour electrophotographic print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain electrophotographic printer components.This document is only intended

29、for the measurement of toner cartridge page yield when printing on plain paper using cyan, magenta, yellow and black toner cartridges. No other claims can be made from this testing regarding quality, reliability, etc.This document is not for use with printers whose minimum printable size is equal to

30、 or greater than A3 or for photo-only printers.NOTE 1 Application of this document for yield measurement of toner replenishment systems (i.e. toner cartridge and bottle type systems where the toner reservoir is internal to the printing system and not user-replaceable) requires some procedural modifi

31、cations specifically noted herein. This document is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this document.NOTE 2 An all-in-one toner c

32、artridge is a cartridge that includes at least: a toner containment part, a photoreceptor part and a developer part (see ISO/IEC 29142-1).2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this documen

33、t. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC 24712, Colour test pages for measurement of office equipment consumable yield3 Terms and definitionsFor the purposes of this docum

34、ent, the following terms and definitions apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp3.1fadephenome

35、non whereby a noticeable reduction in density uniformity in the bars around the sides of the diagnostic page occursNote 1 to entry: This does not have to be a distinct gap.INTERNATIONAL STANDARD ISO/IEC 19798:2017(E) ISO/IEC 2017 All rights reserved 1BS ISO/IEC 19798:2017ISO/IEC 19798:2017(E)Note 2

36、to entry: In this test, fade is defined as a noticeably lighter area, 3 mm or greater, located in the bars around the diagnostic page of the test suite. Generally, the lightening will occur parallel to the paper movement direction during printing. The determination of the change in lightness is to b

37、e made referenced to the 100th page (diagnostic page) printed for each cartridge in testing. For examples of fade, consult Annex A.3.2shake procedurespecified method to carry out shaking of a cartridge according to the user manualNote 1 to entry: If a shake procedure is used in testing, it will be n

38、oted in the report.3.3toner lowsignal generated by the printer when it has been detected that the amount of toner is such that a toner change will be required soonNote 1 to entry: It does not indicate that the system is out of toner.3.4toner outsignal generated by the printer when the toner in the s

39、ystem is depleted and the printer is incapable of reliable printing without user interventionNote 1 to entry: For the purpose of this test, the toner out signal will only be used if it causes the printer to stop printing and requires toner replacement to continue printing.3.5end of lifewhen the prin

40、ter declares “toner out” (3.4) or when fade (3.1) is observed3.6individual cartridge yieldvalue determined by counting the number of diagnostic pages (page 5 of the ISO/IEC 24712 test suite) printed between cartridge installation and end of life (3.5) and multiplying by 5Note 1 to entry: If the prin

41、ter stops due to toner out (3.4) in the middle of a test page suite, the number of the diagnostic pages printed is counted. Then, the first diagnostic page of the suspended print job is included in the subsequent cartridge yield. The number of test page suites counted may contain some pages that sho

42、w visible fade (3.1). To simplify the testing, determination of end of life (3.5) is only made on the diagnostic page (page 5).3.7declared cartridge yieldvalue at or below the lower 90 % confidence bound as prescribed in 6.1 and 6.34 Test parameters and conditions4.1 Set-upPlace the printer on a hor

43、izontal surface and set up the printer according to the installation guide provided in the printer users manual. Use the most recent printer driver available from the manufacturers website or the supplied driver with the printer. The driver version will be specified on the test report. Cartridge ins

44、tallation shall be completed following the instructions in the cartridge installation guide. If there is a contradiction between the printer and cartridge manuals for the cartridge installation, the cartridge manual will take precedence except if changes are recommended for printer or driver setting

45、s.If the cartridges used in testing are toner replenishment or toner bottle types, then one set of toner cartridges will be used to end of life in each printer before the start of the test. The pages printed to 2 ISO/IEC 2017 All rights reservedBS ISO/IEC 19798:2017ISO/IEC 19798:2017(E)deplete these

46、 priming cartridges do not have to be recorded and printing can be conducted at any environment. The priming cartridges are used to bring the printing system to a set toner level condition.NOTE 1 The cartridges used to bring the printing system to a set toner level condition do not have to start out

47、 full. For large capacity systems, using a complete cartridge could result in tens of thousands of pages printed just to bring the system to a set condition.All image and print quality modifiers shall be at their factory pre-set configuration for the printer and default installed condition for the d

48、river. If the printer and driver differ, then the driver defaults shall be used. Any user selectable toner conservation modes shall be disabled during testing. If auto media detection is available on the printer, it shall be disabled and media-type set to plain paper. This is to avoid inaccurate sen

49、sing of the media.For printers that default to duplex printing, the default shall be overridden and the printer be set to simplex for yield testing.If the printer under test uses an internal PDF interpreter, it is okay to use it as long as the printer defaults are set to not substitute fonts. If the internal interpreter is used, this shall be noted on the report.To assure that the test page is printed correctly, any page size modifiers such as “Fit to Page” and font substitution shall be turned off. If the option exists, render