BS ISO IEC 24779-1-2016 Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms icons and symbols for use with biome.pdf

1、BSI Standards PublicationBS ISO/IEC 24779-1:2016Information technology Cross-jurisdictional and societalaspects of implementationof biometric technologies Pictograms, icons and symbolsfor use with biometric systemsPart 1: General principlesBS ISO/IEC 24779-1:2016 BRITISH STANDARDNational forewordThi

2、s British Standard is the UK implementation of ISO/IEC24779-1:2016.The UK participation in its preparation was entrusted to TechnicalCommittee IST/44, Biometrics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to incl

3、ude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 74848 6ICS 01.080.50; 35.040Compliance with a British Standard cannot confer immunity fromlegal obligations.Th

4、is British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2016.Amendments issued since publicationDate Text affectedBS ISO/IEC 24779-1:2016Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologie

5、s Pictograms, icons and symbols for use with biometric systems Part 1: General principlesTechnologie de linformation Aspects socitaux et trans-juridictionnels de la mise en oeuvre de technologies biomtriques Pictogrammes, icnes et symboles pour lutilisation avec les systmes biomtriques Partie 1: Pri

6、ncipes gnrauxINTERNATIONAL STANDARDISO/IEC24779-1Reference numberISO/IEC 24779-1:2016(E)First edition2016-04-15 ISO/IEC 2016BS ISO/IEC 24779-1:2016ii ISO/IEC 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no

7、 part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs membe

8、r body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 24779-1:2016(E)BS ISO/IEC 24779-1:2016ISO/IEC 24779-1:2016(E)Foreword ivIntroduction v1 Scope . 12 Conf

9、ormance . 13 Terms and definitions . 14 Needs and use of icons and symbols in biometric systems 24.1 General . 24.2 Cross application and industry icons and symbols . 24.3 Types of biometric modalities . 24.4 Recognition scenarios enrolment, identification or verification . 25 Methodology for icons

10、and symbols definition 35.1 Design . 35.2 Testing 36 Icons and symbols for biometric systems 46.1 Modality independent icons/symbols for aiding human interaction with capture devices 46.2 System notification 5Bibliography .10 ISO/IEC 2016 All rights reserved iiiContents PageBS ISO/IEC 24779-1:2016IS

11、O/IEC 24779-1:2016(E)ForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Stan

12、dards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and

13、 IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular

14、 the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this documen

15、t may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.i

16、so.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the W

17、TO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 37, Biometrics.ISO/IEC 24779 consists of the following parts, under the general titl

18、e Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms, icons and symbols for use with biometric systems: Part 1: General principles Part 4: Fingerprint applications Part 5: Face applications Part 9: Vascular applicationsiv ISO/IEC 2

19、016 All rights reservedBS ISO/IEC 24779-1:2016ISO/IEC 24779-1:2016(E)IntroductionA major public application of biometric authentication today is likely to be passports, but in the near future it is probable that biometric recognition will be used in other public terminals. These terminals will be lo

20、cated in a variety of environments including unsupervised, a terminal supervised by an attendant or only partly supervised for example an attendant supervising a number of terminals or observed via CCTV and an audio link.With the widespread use of biometrics throughout the world today, this Internat

21、ional Standard is intended to provide the necessary symbols and icons that show the modality of biometrics and to advise the necessity of appropriate preparation for and behaviour required when using biometric systems. This International Standard is also intended to assist subjects by guiding them a

22、s they use biometric systems and thus create a base of internationally recognized symbols and icons.Language-independent symbols that indicate the modality of biometrics and/or instructions, such as icons, will be particularly important for occasional users. In general, it is desirable for there to

23、be more than one mode of presentation (e.g. visual and audible or tactile). Only visual presentation is addressed in this International Standard.A standard family of icons and/or symbols is required since in the absence of widely used standard icons and/or symbols manufacturers will adopt their own

24、proprietary symbols and icons for display on screens. This is likely to lead to confusion, as an example, for public users of self-service terminals.Though common usage makes the distinction that icons are for display on visual display screens and symbols are for printing on signs and in documents i

25、ncluding: user documents, handouts, training material, installation/maintenance manuals, and on the case or key tops and buttons of devices; but in this International Standard no distinction is made between these terms.There are no normative symbols in this International Standard, but it contains a

26、collection of symbols that may be used by biometric systems. ISO/IEC 2016 All rights reserved vBS ISO/IEC 24779-1:2016BS ISO/IEC 24779-1:2016Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms, icons and symbols for use with biometr

27、ic systems Part 1: General principles1 ScopeThe ISO/IEC 24779 multi-part International Standard specifies a family of icons and symbols used in association with devices for biometric enrolment, verification and/or identification. This part of ISO/IEC 24779 describes the approach used in specifying i

28、cons and the range of biometric technologies for which icon and symbol development is considered. The symbols and icons are intended to show the modality of biometrics and to advise the necessity of appropriate preparation for and behaviour required when using the biometric systems. They are also in

29、tended to assist subjects by guiding them as they use the biometric systems.This multi-part International Standard focuses on both enrolment and recognition processes. Icons and symbols used exclusively for biometric enrolment are not specified since most enrolment systems will be supervised, and an

30、 attendant will be available to explain to biometric capture subjects what to do.This multi-part International Standard focuses on communication with the data capture subject. Operators could use this part of ISO/IEC 24779, but they might need additional symbols and information.2 ConformanceThe use

31、of icons, pictograms and symbols within a biometric system is conformant to this part of ISO/IEC 24779 if it follows the specifications provided in Clause 6. The definition of icons, pictograms and symbols for being used in a biometric system is conformant to this part of ISO/IEC 24779 if they follo

32、w the methodology provided in Clause 5.3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1attendantindividual who is present to guide or assist a (biometric capture) subject in enrolling or verifying their biometric data3.2(biometric capture) subje

33、ctindividual who provides biometric data for storage or comparison in a biometric systemINTERNATIONAL STANDARD ISO/IEC 24779-1:2016(E) ISO/IEC 2016 All rights reserved 1BS ISO/IEC 24779-1:2016ISO/IEC 24779-1:2016(E)4 Needs and use of icons and symbols in biometric systems4.1 GeneralThe icons and sym

34、bols specified in this part of ISO/IEC 24779 are for use across different applications, industries and consistent for all biometric types/modalities.4.2 Cross application and industry icons and symbolsIcons and symbols which are used across different applications will be encountered more often and t

35、herefore achieve wider recognition by the public and improve user familiarity.4.3 Types of biometric modalitiesThe part numbers of ISO/IEC 24779 correspond to the part number of ISO/IEC 19794.Table 1 Part number correspondence between ISO/IEC 24779 and ISO/IEC 19794ISO/IEC 24779 ISO/IEC 19794Part 1:

36、 General principles Part 1: FrameworkPart 4: Fingerprint applications Part 4: Finger image dataPart 5: Face applications Part 5: Face image dataPart 9: Vascular applications Part 9: Vascular image data4.4 Recognition scenarios enrolment, identification or verificationThe icons and symbols specified

37、in this part of ISO/IEC 24779 indicate system provided notifications, which could include:a) Wait (or hold steady);b) Success process;c) Failure;d) Request assistance.Icons and symbols for general use of biometric device and its type/modality (e.g. facial recognition or fingerprints) shall be descri

38、bed for each modality. For each modality, the icons and symbols will be defined in the part of ISO/IEC 24779 that addresses that modularity including specifications on how to use or display the icon or symbol. Where multiple modalities are present then multiple symbols and icons may be used.Compound

39、 concepts such as retrying following a failure through to seeking assistance may use a series of combined icons and symbols to guide a user.Where icons and symbols are common to biometric enrolment and recognition, they shall be used in both contexts. It is recommended that the enrolment of an appli

40、cant is used to familiarize both the applicant and operator with the generic symbols for the various biometric modalities.NOTE 1 Other features such as illuminated signs indicating that the system is operational or internally illuminated fingerprint readers are not within the scope of this part of I

41、SO/IEC 24779. The use of icons included in this part of ISO/IEC 24779 would not preclude other illuminated features to help partially sighted persons position their finger in the reader.NOTE 2 It is not precluded that other icon/symbols can be applied where biometric capture is undertaken while a su

42、bject is moving.2 ISO/IEC 2016 All rights reservedBS ISO/IEC 24779-1:2016ISO/IEC 24779-1:2016(E)5 Methodology for icons and symbols definition5.1 DesignThe family of icons and symbols specified should achieve high levels of association between the meaning and the symbol and visual discrimination in

43、a variety of different situations. Symbols and icons in the different parts of this International Standard are developed in line with ISO and IEC 80416: Basic principles for graphical symbols for use on equipment (4 parts) and through liaison with the relevant ISO/IEC committee IEC/SC 3C.5.2 Testing

44、The symbols and icons defined in different parts of this International Standard should have been tested under operational conditions with subjects from both genders and a range of age, cultural, ethnic, religious and different educational backgrounds, as well as people with disabilities (in accordan

45、ce with ISO 9186 (all parts): Procedures for the development and testing of public information symbols). Different approaches to testing may have been used and should have been described. For example, ISO/IEC 24779-4:, Annex A describes the NIST testing approach used.The testing methodology needs to

46、 acknowledge real world situations and conditions, so that care has been taken with respect to considerations to cultural sensitivities including hands, face, eyes etc. Scenario and/or operational testing will need to be supplemented by testing in one or more realistic environments. For example, the

47、 testing allows for various types of usage, e.g. when queuing to use a terminal as well as when using the terminal itself.The tests comprise of different aspects of thought and functionality of the icon/symbol for example:a) Does the user understand what the symbol/icon means (use a scale based poin

48、t system)?b) Is the symbol/icon clear in its instruction (same point system to be used)?c) Any cultural/ethnic considerations brought to the testers attention by the subject?d) Ideal location of where the location of the symbol/icon will be (2-3 locations suggested to the test subject?With comprehen

49、sion testing, consideration should be given to the difference between modalities which can have a physical representation (e.g. face and fingerprint) and those which are more abstract (e.g. voice and vascular image). ISO/IEC 2016 All rights reserved 3BS ISO/IEC 24779-1:2016ISO/IEC 24779-1:2016(E)6 Icons and symbols for biometric systems6.1 Modality independent icons/symbols for aiding human interaction with capture devicesFigure 1 Standing position, forward IEC 60417-6333-1This symbol is used to indicate that the st