BS ISO IEC 29102-2015 Information technology Office equipment Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function .pdf

1、BSI Standards PublicationBS ISO/IEC 29102:2015Information technology Office equipment Methodfor the determination of inkcartridge photo yield for colourprinting with inkjet printersand multi-function devicesthat contain inkjet printercomponentsBS ISO/IEC 29102:2015 BRITISH STANDARDNational forewordT

2、his British Standard is the UK implementation of ISO/IEC29102:2015. It supersedes BS ISO/IEC 29102:2011 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee IST/3, IT Printers and Cartridges.A list of organizations represented on this committee can beobtaine

3、d on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 84355 6ICS 37.100.10Compliance with a B

4、ritish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2015.Amendments issued since publicationDate Text affectedBS ISO/IEC 29102:2015Information technology Office equipment Metho

5、d for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer componentsTechnologies de linformation quipement de bureau Mthode dessai de la dtermination du rendement des cartouches dencre pour limpression de phot

6、ographies en couleurs avec des imprimantes jet dencre et des dispositifs multi-fonctions contenant des composants dimprimantes jet dencreINTERNATIONAL STANDARDISO/IEC29102Reference numberISO/IEC 29102:2015(E)Second edition2015-08-15 ISO/IEC 2015BS ISO/IEC 29102:2015ii ISO/IEC 2015 All rights reserve

7、dCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an int

8、ranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww

9、.iso.orgISO/IEC 29102:2015(E)BS ISO/IEC 29102:2015ISO/IEC 29102:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Test parameters and conditions . 44.1 Set up . 44.2 Sample size . 54.3 Print mode 54.4 Print environment 64.5 Paper 74.6 Maintenance 74.7 Te

10、st files 75 Test methodology 85.1 Testing procedure . 85.1.1 Preparation . 85.1.2 Installation of test cartridges 85.1.3 Testing . 85.1.4 End of cartridge life procedure . 85.2 Procedure for handling streaks 85.2.1 General 85.2.2 Nozzle cleaning . 95.3 Procedure for handling a defective cartridge, p

11、rinthead or printer . 95.3.1 General 95.3.2 Defective cartridge 105.3.3 Defective printhead 105.3.4 Defective printer .106 Determination of the declared yield value and declaration 106.1 Yield of primary cartridges . 106.2 Yield of supplemental cartridges . 116.2.1 General. 116.2.2 Case 1: supplemen

12、tal cartridges that has not reached End of life .126.2.3 Case 2: supplemental cartridges that have reached End of life once or twice 136.3 Test data reporting . 156.4 Declaration of the yield . 15Annex A (informative) Examples of fade .19Annex B (informative) Examples of streaks .20Annex C (normativ

13、e) Test reporting form 21Annex D (informative) Process flowchart.24Annex E (informative) Method for black and white photo yield determination 26 ISO/IEC 2015 All rights reserved iiiContents PageBS ISO/IEC 29102:2015ISO/IEC 29102:2015(E)ForewordISO (the International Organization for Standardization)

14、 and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal

15、 with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC

16、 have established a joint technical committee, ISO/IEC JTC 1.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be

17、 noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for

18、identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the con

19、venience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Forewo

20、rd Supplementary information .The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 28, Office equipment.This second edition cancels and replaces the first edition (ISO/IEC 29102:2011), of which it constitutes a minor revision.iv ISO/IEC 2015 All right

21、s reservedBS ISO/IEC 29102:2015ISO/IEC 29102:2015(E)IntroductionThe scope of this International Standard is limited to evaluation of ink cartridge photo yield of ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated printheads) for colour photo printing with

22、 colour inkjet printers. This International Standard can be applied to colour inkjet printers having an interface to a computer as well as colour inkjet printers that cannot be connected to a computer. This International Standard can also be applied to the inkjet printer component of any multifuncti

23、onal device that has a digital input printing path, including multi-function devices that contain inkjet printer components. Both liquid and solid ink products can be tested using this International Standard.The cartridge photo yields of primary cartridges are determined by an end of life judgment,

24、or signalled with either of two phenomena: fade, caused by depletion of ink in the cartridge, or automatic printing stop, caused by an Ink Out detection function. The cartridge photo yields of supplemental cartridges are estimated. It is envisioned that one of the uses of this International Standard

25、 will be for the calculation of cost per page (CPP). While this International Standard measures a portion of this cost, it is not used as the sole component of CPP calculation. Additional factors need to be considered for accurate CPP calculations. ISO/IEC 2015 All rights reserved vBS ISO/IEC 29102:

26、2015BS ISO/IEC 29102:2015Information technology Office equipment Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components1 ScopeThe purpose of this International Standard is to provide a metho

27、d to determine the ink cartridge photo yield of ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated printheads) for colour photo printing with colour inkjet printers and multifunction devices that contain inkjet printer components. In the case where a cart

28、ridge set can be used in multiple printer models, only one yield test needs to be performed as long as the difference between printer models does not impact yield.NOTE A cartridge supplier may choose to use more than one market identifier for a single physical cartridge. In this case only one yield

29、test is required as long as there are no differences in the cartridges other than market identifiers.This International Standard prescribes the following: the test method that manufacturers, test laboratories, etc. use to determine ink cartridge photo yield; the method for determination of declared

30、photo yield values from the test results; and the appropriate method of describing the photo yield of cartridges in documentation supplied to the consumer by the manufacturer.This International Standard is only intended for the determination of ink cartridge photo yield. No other claims can be made

31、from this testing regarding quality, reliability, etc.This International Standard can be used to determine the yield of any cartridge that is used during the printing of the photo test file defined in ISO/IEC 29103.This International Standard is not for use with printers whose minimum printable size

32、 is equal to or greater than A3. This International Standard is not intended to measure the yield of photo printing on paper size larger than 46, L or A6. In addition, this International Standard is not for use with industrial printers or point of sale printers. It only applies to desktop printing s

33、ystems.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any

34、 amendments) applies.ISO/IEC 29103, Information technology Office equipment Colour photo test pages for measurement of ink cartridge yield for colour photo printingISO/IEC 24711, Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain pr

35、inter components INTERNATIONAL STANDARD ISO/IEC 29102:2015(E) ISO/IEC 2015 All rights reserved 1BS ISO/IEC 29102:2015ISO/IEC 29102:2015(E)3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1fadephenomenon in which a significant colour change occurs

36、due to ink depletionNote 1 to entry: If a printer exhibits fade, a five minute pause is allowed to provide for recovery of the ink delivery system and printing can continue. If fade appears on the next page, then the cartridge is judged at end of life and the additional page printed after the five m

37、inute pause is not counted in the yield calculation. If fade does not appear on the next page, then printing can continue until the next fade or ink out is encountered.Note 2 to entry: For examples of fade, please consult Annex A.Note 3 to entry: In some printer systems, fade can occur prematurely d

38、ue to the way that ink is provided to the printing system.Note 4 to entry: It can be helpful to use the first photo test suite print samples from the first cartridge set for colour comparison.Note 5 to entry: A blue light source (such as a blue LED) can be used to help in the detection of yellow fad

39、e.3.2streakthin lines of colour that appear in test imagesNote 1 to entry: Streaks differ from fade in the width.Note 2 to entry: If streaks occur in two or more out of four consecutive test pages, then a streak removal operation is required.Note 3 to entry: Streaks can appear due to a number of rea

40、sons; thermal issues and clogged nozzles being two of the main causes. Comparisons are made using the phenomenon sample provided in Annex B.3.3streak removal operationprocedure used to restore the print performance by removing streaksNote 1 to entry: It is often called a nozzle cleaning operation.No

41、te 2 to entry: If streaks are observed in two or more out of four consecutive test pages, first the printer can be left idle for five minutes. Then an additional four pages are printed. If the streaks are still observed, then a streak removal operation is conducted according to the latest printer ma

42、nufacturer documentation. Due to the significant amount of ink that is used for cleaning, the maximum permissible number of times that the streak removal operation can be used on a given cartridge is prescribed in 5.2.1. All test pages printed during this process will be included in the page count f

43、or determining the yield.3.4printhead alignment operationfunction that aligns newly installed printheadsNote 1 to entry: If it is mandatory according to the latest printer manufacturer documentation, this operation is performed during testing. The pages used in the alignment procedure are not counte

44、d in the measurement of yield.3.5ink lowwarning generated by the printing system when it has determined that the amount of ink is such that a cartridge change may be required soonNote 1 to entry: It does not indicate that the system is out of ink.2 ISO/IEC 2015 All rights reservedBS ISO/IEC 29102:20

45、15ISO/IEC 29102:2015(E)3.6ink outsignal generated by the printing system when the usable ink in the system is depleted and the printer stops printing3.7end of lifecondition determined by one of two mechanisms: fade (3.1) or ink out (3.6)Note 1 to entry: For cartridges containing multiple colour inks

46、, end of life is defined when the first colour exhibits fade or ink out. In the event that the printer can continue printing after ink out is reported, the cartridge will still be considered at end of life.3.8end of testingpoint of time when all of primary cartridges are consumed three times per pri

47、nter under testing3.9photo test suiteseries of pages defined in ISO/IEC 29103 that are printed as separate jobs3.10individual cartridge photo yieldnumber of pages printed between cartridge installation and end of life3.11declared cartridge photo yieldat or below the lower 90 % confidence bound of th

48、e meanNote 1 to entry: 90 % confidence bound of the mean is prescribed in 6.1 and 6.2.3.12primary cartridgemajor contributing cartridge for ink consumptionNote 1 to entry: The minimum number of primary cartridges to be tested for different printing systems is prescribed in 4.2. Cartridges that reach

49、 end of life (3.7) first are classified as primary cartridges. They should be consumed at least three times per printer at end of testing (3.8).Note 2 to entry: Colour inkjet printers commonly utilize a set of different colour inks to improve quality of photo images. The number of different colour inks ranges from three to more than 10. Ink usages of different colours are not designed to be uniform. In order to maintain testing time and cost at a reasonable level, the definition of primary cartridges is introduced in this Inte