BS ISO IEC 29109-5-2014 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO IEC 19794 Face image data《信息技术 ISO IEC 19794中所定.pdf

1、BSI Standards PublicationBS ISO/IEC 29109-5:2014Information technology Conformance testingmethodology for biometricdata interchange formatsdefined in ISO/IEC 19794Part 5: Face image dataBS ISO/IEC 29109-5:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO/IEC

2、29109-5:2014. It supersedes BS ISO/IEC 29109-5:2012 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee IST/44, Biometrics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to i

3、nclude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 78775 1ICS 35.040Compliance with a British Standard cannot confer immunity fromlegal obligations.This Briti

4、sh Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2014.Amendments issued since publicationDate Text affectedBS ISO/IEC 29109-5:2014Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19

5、794 Part 5: Face image dataTechnologies de linformation Mthodologie dessai de conformit pour les formats dinterchange de donnes biomtriques dfinis dans lISO/CEI 19794 Partie 5: Donnes dimage de la face ISO/IEC 2014INTERNATIONAL STANDARDISO/IEC29109-5Third edition2014-04-15Reference numberISO/IEC 291

6、09-5:2014(E)BS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E)ii ISO/IEC 2014 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechan

7、ical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11F

8、ax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E) ISO/IEC 2014 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope .12 Conformance .13 Normative references 24 Terms and definitions . 25 Symbols and abbrev

9、iated terms . 26 Conformance testing methodology . 26.1 Overview 26.2 Table of requirements in the base standard 26.3 ISO/IEC 19794-5:2005 Level 1 and 2 test assertions 13Bibliography .28BS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E)ForewordISO (the International Organization for Standardization) an

10、d IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal wi

11、th particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC ha

12、ve established a joint technical committee, ISO/IEC JTC 1.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be no

13、ted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for id

14、entifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the conv

15、enience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword

16、 - Supplementary informationThe committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 37, Biometrics.This third edition cancels and replaces the second edition (ISO/IEC 29109-5:2012), the tables of which have been technically revised.ISO/IEC 29109 consists

17、 of the following parts, under the general title Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794: Part 1: Generalized conformance testing methodology Part 2: Finger minutiae data Part 4: Finger image data Part 5: Face image data

18、Part 6: Iris image data Part 7: Signature/sign time series data Part 8: Finger pattern skeletal data Part 9: Vascular image data Part 10: Hand geometry silhouette dataiv ISO/IEC 2014 All rights reservedBS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E)IntroductionThe ISO/IEC 19794-5:2005 standard specif

19、ies a data record interchange format for storing, recording, and transmitting one or more face images within a Common Biometric Exchange Formats Framework (CBEFF) data structure. Each image is accompanied by subject-specific and image-specific metadata contained in a header record. This part of the

20、ISO/IEC 29109 multipart standard establishes tests for checking the correctness of the binary record.The objective of ISO/IEC 19794-5:2005 cannot be completely achieved until biometric products can be tested to determine whether they conform to those specifications. Conforming implementations are a

21、necessary prerequisite for achieving interoperability among implementations; therefore there is a need for a standardized conformance testing methodology, test assertions, and test procedures as applicable to specific modalities addressed by each part of ISO/IEC 19794. The test assertions will cover

22、 as much as practical of the ISO/IEC 19794 requirements (covering the most critical features), so that the conformity results produced by the test suites will reflect the real degree of conformity of the implementations to ISO/IEC 19794 Data Interchange Format records. This is the motivation for the

23、 development of this conformance testing methodology.This part of ISO/IEC 29109 supports those applications that require use of face image data according to ISO/IEC 19794-5:2005. It defines a testing methodology to ensure conformance of a vendors application or service to the base ISO/IEC 19794-5:20

24、05 specification. Thus this document is intended to establish elements of the Conformance Testing Methodology framework that are specific to the Face Image-based Data Record requirements of ISO/IEC 19794-5:2005 conformance testing, define requirements and guidelines for specifying conformance test s

25、uites and related test methods for measuring conformity of products and services to the Face Image-based Data Record requirements of ISO/IEC 19794-5:2005, and define test procedures to be followed before, during, and after conformance testing.This standard is applicable to the development and use of

26、 conformity test method specifications, conformity test suites for ISO/IEC 19794-5:2005 records, and conformance testing programs for ISO/IEC 19794-5:2005 conformant products. It is intended primarily for use by testing organizations, but may be applied by developers and users of test method specifi

27、cations and test method implementations. ISO/IEC 2014 All rights reserved vBS ISO/IEC 29109-5:2014BS ISO/IEC 29109-5:2014Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 5: Face image data1 ScopeThis part of ISO/IEC 29109 spe

28、cifies elements of conformance testing methodology, test assertions, and test procedures as applicable to two-dimensional face images defined in the ISO/IEC 19794-5:2005 biometric data interchange format standard for face image data.This part of ISO/IEC 29109 establishes test assertions of the struc

29、ture of the face image data format as specified in ISO/IEC 19794-5:2005 (Type A Level 1 as defined in ISO/IEC 29109-1:2009), test assertions of internal consistency by checking the types of values that may be contained within each field (Type A Level 2 as defined in ISO/IEC 29109-1:2009).This part o

30、f ISO/IEC 29109 does not establish tests of conformance of 3D face records defined in ISO/IEC 19794-5:2005/Amd.2, tests of conformance of CBEFF structures required by ISO/IEC 19794-5:2005, tests of consistency with the input biometric data record (Level 3), tests of conformance of the image data to

31、the quality-related specifications of ISO/IEC 19794-5:2005, tests of conformance of the image data blocks to the respective JPEG or JPEG 2000 standards, tests of other characteristics of biometric products or other types of testing of biometric products (e.g. acceptance, performance, robustness, sec

32、urity).2 ConformanceBiometric data interchange format conformance tests conform to this part of ISO/IEC 29109 if they satisfy all of the normative requirements related to Clause 6. Specifically, they shall use the test methodology specified in Clauses 6, 7 and 8 of ISO/IEC 29109-1, and all Level 1 a

33、nd Level 2 tests shall use the assertions defined in Table 2 of this part of ISO/IEC 29109.Implementations of ISO/IEC 19794-5:2005 tested according to the methodology specified shall be able to claim conformance only to those biometric data record requirements specified in ISO/IEC 19794-5:2005 that

34、are tested by the test methods established by this methodology.Implementations of ISO/IEC 19794-5:2005 do not necessarily need to conform to all possible aspects of ISO/IEC 19794-5:2005, but only to those ISO/IEC 19794-5:2005 requirements that are claimed to be supported by the implementation in an

35、Implementation Conformance Statement, filled out in accordance with Clause 8 of ISO/IEC 29109-1 and Table 1 of this part of ISO/IEC 29109.INTERNATIONAL STANDARD ISO/IEC 29109-5:2014(E) ISO/IEC 2014 All rights reserved 1BS ISO/IEC 29109-5:2014ISO/IEC 29109-5:2014(E)3 Normative referencesThe following

36、 documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC 19794-5:2005,

37、 Information technology Biometric data interchange formats Part 5: Face image dataISO/IEC 29109-1:2009, Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 1: Generalized conformance testing methodology4 Terms and definitionsFor

38、 the purposes of this document, the terms and definitions given in ISO/IEC 29109-1 apply.5 Symbols and abbreviated termsFor the purposes of this document, the symbols and abbreviated terms given in ISO/IEC 29109-1 apply.6 Conformance testing methodology6.1 OverviewThe testing methodology specified i

39、n Clauses 6, 7 and 8 of ISO/IEC 29109-1 shall apply. The content of the tables below is based on the conformance testing methodology outlined in ISO/IEC 29109-1 and shall only be used in the context of that testing methodology.6.2 Table of requirements in the base standardThe normative requirements

40、of ISO/IEC 19794-5:2005 Biometric Data Interchange Format Part 5: Face Image Data are listed in Table 1. The supplier of the IUT can explain which optional components of the standard are supported and the testing laboratory can note the results of the test.Under subformat applicability the columns l

41、abelled B, F and T indicate the Basic, Full Frontal and Token Frontal image types.Table 1 Requirements of the Base Standard (ISO/IEC 19794-5:2005)Require-ment IDRef. in Base StdRequirement Summary Level Sta-tusSubformat Applicabil-ityIUT Sup-portSup-ported RangeTest ResultB F TR-1 5.2.1 Within the r

42、ecord format and all well-defined data blocks therein, all multi-byte quantities are implied shall stored in Big-Endian format. That is, the more significant bytes of any multi-byte quantity are stored at lower addresses in memory than less significant bytes. For example, the value 1025 (2 to the 10

43、th power plus one) would be stored as first byte = 00000100 and second byte = 00000001.1 M Y Y YR-2 5.2.2 Numeric ValuesAll numeric values are fixed-length unsigned integer quantities, unless otherwise specified.3C O-3 Y Y Y2 ISO/IEC 2014 All rights reservedBS ISO/IEC 29109-5:2014ISO/IEC 29109-5:201

44、4(E)Require-ment IDRef. in Base StdRequirement Summary Level Sta-tusSubformat Applicabil-ityIUT Sup-portSup-ported RangeTest ResultB F TR-3 5.4.1 Format IdentifierThe (4 byte) Format Identifier shall consist of three ASCII characters “FAC” followed by a zero byte as a NULL string terminator to ident

45、ify the record format as the face record format.1 M Y Y YR-4 5.4.2 Version NumberThe (4 byte) Version Number block shall consist of three ASCII numerals followed by a zero byte as a NULL string terminator.The first and second character will represent the major version number and the third character

46、will represent the minor revision number.The version number of this specification shall be 0x30313000; “010” Version 1 revision 01 M Y Y YR-5 Table 2 57 Length of Record 232- 1 1 M Y Y YR-6 5.4.3 Length of RecordThe (4 byte) Record Length Block shall be the combined length in bytes for the record. T

47、his is the entire length of the record including the Facial Record Header and Facial Record Data.2 M Y Y YR-7 Table 2 1 Number of Facial Images 65 535 1 M Y Y YR-8 5.4.4 Number of Facial ImagesThe (2 byte) Number of Facial Images block shall be the number of facial images included in the record.2 M

48、Y Y YR-9 5.5 The Facial Information blockThe (20 byte) Facial Information block is intended to describe discrete properties of the individual discern-able from the image, one is included for each facial image included in the record. The structure of this block is shown in ISO/IEC 19794-5:2005 Figure

49、 2.Zero or more Facial Feature blocks, one Image Infor-mation block, and one Image Data block follow this block.2 M-2 Y Y YR-10 5.5.1 Facial Record Data LengthThe (4 byte) Facial Record Data Length field denotes the sum of the lengths of the Facial Information block, the Feature Point block(s), the Image Information block, and the Image Data block.The minimum value of the Facial Record Data Length is 32 bytes plus the size of the Image Data block (in bytes).2 M Y Y YR-11 5.5.2 Number of Feature