BS ISO IEC 29142-1-2013 Information technology Print cartridge characterization General terms symbols notations and cartridge characterization framework《信息技术 打印盒特性描述 总论 术语、符号、标记和墨盒.pdf

1、BSI Standards PublicationBS ISO/IEC 29142-1:2013Information technology Print cartridge characterizationPart 1: General: terms, symbols, notationsand cartridge characterization frameworkBS ISO/IEC 29142-1:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO/IEC2

2、9142-1:2013.The UK participation in its preparation was entrusted to TechnicalCommittee IST/3, IT Printers and Cartridges.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a con

3、tract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 77892 6ICS 37.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the auth

4、ority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS ISO/IEC 29142-1:2013Information technology Print cartridge characterization Part 1: General: terms, symbols, notations and cartridge characterization frameworkTechnologies de l

5、information Caractrisation de cartouche dimpression Partie 1: Gnralits: termes, symboles, notations et cadre de travail de caractrisation de cartouche ISO/IEC 2013INTERNATIONAL STANDARDISO/IEC29142-1First edition2013-04-01Reference numberISO/IEC 29142-1:2013(E)BS ISO/IEC 29142-1:2013ISO/IEC 29142-1:

6、2013(E)ii ISO/IEC 2013 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2013All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the int

7、ernet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.

8、iso.orgPublished in SwitzerlandBS ISO/IEC 29142-1:2013ISO/IEC 29142-1:2013(E) ISO/IEC 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Requirements 75 Structure of ISO/IEC 29142 . 85.1 Data Reporting 85.2 Environmental

9、 85.3 Toner and ink cartridge characterization 96 Framework Overview for cartridge characterization 96.1 Elements of a print system . 96.2 Cartridge configurations 106.3 Performance attributes measured on a printed page 106.4 Physical attributes 117 Attribute framework for testing and characterizin

10、g cartridges 117.1 Overview . 117.2 Special considerations for binomial and continuous performance point attributes 137.3 Special considerations for point and lifetime binomial attributes137.4 Special considerations for performance testing with page attribute values 137.5 Test requirements for all a

11、ttributes . 157.6 Test methodology for lifetime and point attributes .198 Framework requirements for determination of declared attribute values .228.1 Determination of the declared value for continuous lifetime or continuous physical attributes. 228.2 Determination of the declared value for continuo

12、us point attributes .238.3 Determination of the declared value for lifetime, point and physical binomial attributes 249 Framework requirements for reporting cartridge characterization results .24Annex A (informative) Terms cross-reference 25Bibliography .28BS ISO/IEC 29142-1:2013ISO/IEC 29142-1:2013

13、E)ForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through tech

14、nical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take pa

15、rt in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of the joint technical committee is to prepare Intern

16、ational Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.Attention is drawn to the possibility that some of

17、 the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.ISO/IEC 29142-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 28, Office equipment.iv ISO/IEC

18、 2013 All rights reservedBS ISO/IEC 29142-1:2013ISO/IEC 29142-1:2013(E)IntroductionThe purpose of this part of ISO/IEC 29142 is to define the framework for characterizing ink and toner cartridges used in printing devices that have a digital input printing path, including multi-function devices. This

19、 part of ISO/IEC 29142 defines terms, symbols, and notations used throughout the ISO/IEC 29142 series to characterize such ink and toner cartridges.Customer information related to ink and toner cartridges is not consistent in the global marketplace.Cartridge manufacturers, including original, non-or

20、iginal manufacturers, refillers, and remanufacturers, have each communicated expressions of cartridge characteristics.The ISO/IEC 29142 series is provided to aid transparency between manufacturers, suppliers and their customers regarding selected cartridge characteristics. The selected cartridge cha

21、racteristics do not provide for an exhaustive cartridge characterization. Where applicable, cartridge attributes and the associated characterization tests are used consistently with both ink and toner cartridge technologies. The selected cartridge attributes are defined for all cartridges, regardles

22、s of manufacturing methodology. ISO/IEC 2013 All rights reserved vBS ISO/IEC 29142-1:2013BS ISO/IEC 29142-1:2013Information technology Print cartridge characterization Part 1: General: terms, symbols, notations and cartridge characterization framework1 ScopeThis part of ISO/IEC 29142 establishes ter

23、ms, symbols, notations and a framework for characterizing toner and ink cartridges used in printing devices that have a digital input printing path, including multi-function devices. This part of ISO/IEC 29142 is intended for equipment used in office environments.It primarily provides a foundation f

24、or measuring, evaluating, or specifying characteristics of such toner and ink cartridges.The terms, symbols, notations and framework established herein can be applied to such cartridges.The characterizations associated with the terms, symbols, notations, and framework established herein are specifie

25、d throughout the ISO/IEC 29142 series.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the ref

26、erenced document (including any amendments) applies.ISO 13655, Graphic technology Spectral measurement and colorimetric computation for graphic arts imagesISO 5-3, Photography and graphic technology Density measurements Part 3: Spectral conditionsISO/IEC 29142-2, Information technology Print cartrid

27、ge characterization Part 2: Cartridge characterization data reportingISO/IEC 29142-3, Information technology Print cartridge characterization Part 3: Environment3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1all-in-one toner cartridgecartridge

28、that includes at least: a toner containment part, a photoreceptor part, and a developer part3.2black-only printerprinter with an operating part to apply ink or toner on a substrate with functionality limited to print output using only a single black colourantNote 1 to entry: In the case of a printer

29、 capable to operate with only a black colourant cartridge and alternatively to operate with other cartridge configurations that include other colourants, the black-only printer condition is limited to when only the single black colourant cartridge is installed.INTERNATIONAL STANDARD ISO/IEC 29142-1:

30、2013(E) ISO/IEC 2013 All rights reserved 1BS ISO/IEC 29142-1:2013ISO/IEC 29142-1:2013(E)3.3binomial attributeattribute which either occurs or does not occur and which is characterized by a count of the number of times it occurs in a particular number of observationsNote 1 to entry: A random process

31、is said to be binomial if it satisfies four basic properties:a) It consists of a sequence of n trials for some n 1.b) Each trial has exactly two possible outcomes, A and B, which are mutually exclusive.c) P(A), the probability of A, takes the same value p on all n trials. P(B) is likewise fixed at 1

32、p.d) The n trials are independent of one another.3.4cartridgeuser replaceable unit operating with a printing system that includes at least a containing mechanism designed for materials intended for deposition on a substrate3.5cartridge attribute test reportreport including the information of a cart

33、ridge customer report and the detailed cartridge characterization results of an ISO/IEC 29142 cartridge characterization test reported for customer presentation according to a required formatNote 1 to entry: The format is prescribed according to each ISO/IEC 29142 standardized or specified cartridge

34、 characterization test and is in compliance with ISO/IEC 29142-2.3.6cartridge characterization testtest method provided in or in compliance with ISO/IEC 29142-1 for the purpose of evaluating an attribute of a cartridge or cartridge set of interest to cartridge and cartridge set users3.7cartridge col

35、lectorany party providing a cartridge take-back or collection programEXAMPLE A business entity designated to collect cartridges.3.8cartridge elementsub piece of a cartridge other than the containment part of the cartridge3.9cartridge end-of-lifepoint in a cartridge life-cycle from which the cartridg

36、e is no longer used for its intended purpose without additional non-customer interaction3.10cartridge identifierformatted human readable arrangement of information uniquely specifying a distinct cartridge3.11cartridge life percent completion pointpoint in the life of a cartridge computed as a percen

37、t of expected cartridge life3.12cartridge setgroup of colourants and their assignment to one or more cartridges as defined by a printer manufacturer to be necessary and sufficient to produce the fully functional default colour renditionsEXAMPLE Default colour renditions: printed black, red, green, b

38、lue, cyan, magenta, and yellow.2 ISO/IEC 2013 All rights reservedBS ISO/IEC 29142-1:2013ISO/IEC 29142-1:2013(E)Note 1 to entry: A printer may have more than one fully functional cartridge set.3.13cartridge suppliercartridge marketer, manufacturer, remanufacturer, refiller, or distributor, being the

39、party or parties responsible for marketing the cartridge and providing customer support for the cartridge3.14colour printerprinter with an operating part to apply ink or toner on a substrate, with functionality to produce print output containing colours3.15containment partcontaining mechanism design

40、ed for materials intended for deposition on a substrate3.16continuous attributeattribute which can take on any of a range of values3.17cross-systems attribute tolerance rangeCSATRrange of actual attribute values for a cartridge characterization attribute of a particular cartridge characterization te

41、st method, determined from evaluation of exemplary systems to which the test method applies3.18customer reportreport, including a cartridge notification, and a cartridge attribute checklist, with summary results of selected ISO/IEC 29142 cartridge attribute characterization tests, presented accordin

42、g to a required formatNote 1 to entry: The format is prescribed according to each ISO/IEC 29142 standardized or specified cartridge characterization test and is in compliance with ISO/IEC 29142-2.3.19deposition materialmaterial, ink or toner, liquid or solid, colourant or non-colourant, that can be

43、contained in a cartridge, and that is designed for deposition on a surface by means of a printing system3.20developer partphysical mechanism, which may or may not be a cartridge element, which functions to apply toner particles to the latent image on the photoreceptor part of an electrophotographic

44、printing system3.21discrete attributeattribute which can take only a finite number of values within a range, such as an integer count3.22dye inkmaterial designed for liquid state deposition on a substrate, including a chemical dye colourant3.23electrophotographic printerprinter principally using opt

45、o electric phenomena and electrostatic attraction to move toner to a substrate3.24end-of-lifephase in a cartridge life-cycle when the cartridge can no longer be used for its intended purpose without additional non-customer interaction ISO/IEC 2013 All rights reserved 3BS ISO/IEC 29142-1:2013ISO/IEC

46、29142-1:2013(E)3.25expected cartridge lifeapproximate number of pages likely to be printed from a cartridge when run to cartridge end-of-life according to an ISO/IEC 29142 standardized or specified test method3.26filled cartridgeuser replaceable unit of a printing system that includes at least ink o

47、r toner materials, intended for deposition on a substrate and a containing mechanism for such materials3.27incinerationdisposal method that involves combustion of waste material converting it into heat, gas, steam and ash but not including smelting3.28inkmaterial, which may or may not include colour

48、ant, designed for liquid state deposition on a substrate3.29ink cartridgeuser replaceable unit of a printing system that includes at least a containing mechanism designed for ink intended for deposition on a substrate3.30ink deposition mechanismimaging apparatus for depositing ink on a printing subs

49、trateEXAMPLE A printhead.3.31ink transport partink channelling mechanism operating between an ink deposition mechanism and an ink containment part, particularly when the ink deposition mechanism and the ink containment part are not physically abutted3.32inkjet printerprinter with an operating part, for example a printhead, to apply ink on a substrate3.33integrated ink cartridgecartridge that includes at least: an ink containment part, an ink transport part, and an ink deposition mechanism3.34landfilledwaste disposal in a landfill or