BS ISO IEC 8650-2-1997 Information technology - Open systems interconnection - Protocol specification for the association control service element - Protocol implementation conforma.pdf

1、BRITISH STANDARD BS ISO/IEC 8650-2:1997 Information technology OpenSystems Interconnection Protocol specification for the Association Control Service Element: Protocol Implementation Conformance Statement (PICS) proforma (ITU-T Rec. X.247 (1996)| ISO/IEC 8650-2:1997) ICS 35.100.70BSISO/IEC8650-2:199

2、7 This British Standard, having been prepared under the directionof the DISC Board, waspublished under the authorityof the Standards Boardand comes into effect on 15December1997 BSI 04-2000 ISBN 0 580 28718 1 National foreword This British Standard reproduces verbatim ISO/IEC8650-2:1997 and implemen

3、ts it as the UK national standard. It supersedes BS ISO/IEC8650-2:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/21, Open Systems Interconnection, Data Management and Open Distributed Processing, which has the responsibility to: aid enquirer

4、s to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations repre

5、sented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the other,

6、publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or

7、 by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer i

8、mmunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO/IECtitle page, pages ii to iv, pages1 to11 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will b

9、e indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSISO/IEC8650-2:1997 BSI 04-2000 i Contents Page National foreword Inside front cover Foreword iii Text of ISO/IEC 8650-2 1ii blankBSISO/IEC8650-2:1997 ii BSI 04-2000 Contents Page

10、 Foreword iii Introduction 1 1 Scope 1 2 Normative references 1 2.1 Identical Recommendations|International Standards 1 2.2 Paired Recommendations|International Standards equivalent in technical contents 2 2.3 Additional references 2 3 Definitions 2 3.1 Terms defined in ITU-T Rec. X.227|ISO/IEC8650-

11、1 2 3.2 Terms defined in ITU-T Rec. X.290|ISO/IEC9646-1 2 3.3 Additional terms 2 4 Abbreviations 2 5 Conformance 2 Annex A Protocol Implementation Conformance Statement (PICS) proforma for the ACSE protocol 3 A.1 Identification of PICS proforma corrigenda 3 A.2 Instructions 3 A.3 Identification of t

12、he implementation 5 A.4 Protocol Identification 6 A.5 Global statement of conformance 6 A.6 Supported roles 6 A.7 Protocol mechanisms 7 A.8 Functional units 7 A.9 Supported APDUs 7 A.10 Supported APDU parameters 8 A.11 Supported parameter forms 10 Annex B Summary of conditions 11 Table A.1 3 Descrip

13、tors: Data processing, information interchange, network interconnection, open systems interconnection, application layer, control procedures, services, protocols, implementation.BSISO/IEC8650-2:1997 BSI 04-2000 iii Foreword ISO (the International Organization for Standardization) and IEC (the Intern

14、ational Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fie

15、lds of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a

16、joint technical committee, ISO/IECJTC1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least75% of the national bodies casting a vote. International Standard ISO/IEC

17、8650-2 was prepared by Joint Technical Committee ISO/IEC JTC1, Information technology, Subcommittee SC21, Open systems interconnection, data management and open distributed processing, in collaboration with ITU-T. The identical text is published as ITU-T Recommendation X.247. This second edition can

18、cels and replaces the first edition (ISO/IEC8650-2:1995), which has been technically revised. ISO/IEC 8650 consists of the following parts, under the general title Information technology Open Systems Interconnection Protocol specification for the Association Control Service Element: Part 1: Protocol

19、 specification; Part 2: Protocol Implementation Conformance Statement (PICS) proforma. Annex A forms an integral part of this part of ISO/IEC8650. Annex B is for information only.iv blankBSISO/IEC8650-2:1997 BSI 04-2000 1 Introduction This Recommendation|International Standard is one of a set of Rec

20、ommendations|International Standards produced to facilitate the interconnection of information processing systems. It is related to other Recommendations and International Standards in the set as defined by the Reference Model for Open Systems Interconnection (see ITU-T Rec. X.200|ISO/IEC7498-1). Th

21、e Reference Model subdivides the area of standardization for interconnection into a series of layers of specification, each of manageable size. The goal of Open Systems Interconnection is to allow, with a minimum of technical agreement outside the interconnection standards, the interconnection of in

22、formation processing systems: from different manufacturers; under different managements; of different levels of complexity; and of different technologies. ITU-T Rec. X.227|ISO/IEC 8650-1 specifies the connection-oriented mode protocol for the application-service-element for application-association c

23、ontrol: the Association Control Service Element (ACSE). The ACSE connection-oriented mode provides services for establishing and releasing application-associations. The ACSE protocol also includes an optional functional unit for exchanging information to support authentication during association est

24、ablishment. The ACSE services apply to a wide range of application-process communication requirements. To evaluate the conformance of a particular implementation, it is necessary to have a description of the capabilities and options which have been implemented. Such a description is called a Protoco

25、l Implementation Conformance Statement (PICS). This Recommendation|International Standard includes the PICS proforma for the connection-oriented ACSE protocol as defined in ITU-T Rec. X.227|ISO/IEC8650-1. 1 Scope This Recommendation|International Standard provides the Protocol Implementation Conform

26、ance Statement (PICS) proforma for the connection-oriented ACSE protocol specified in ITU-T Rec. X.227| ISO/IEC8650-1. This PICS proforma is in compliance with the relevant requirements, and in accordance with the relevant guidance, given in ITU-T Rec. X.296|ISO/IEC9646-7. Detail of the use of this

27、proforma is provided in this Recommendation|International Standard. The supplier of an implementation which is claimed to conform to ITU-T Rec. X.227|ISO/IEC8650-1 is required to complete a copy of the PICS proforma provided in Annex A, and is required to provide the information necessary to identif

28、y both the supplier and the implementation. 2 Normative references The following Recommendations and International Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation|International Standard. At the time of publication, the editions indicat

29、ed were valid. All Recommendations and Standards are subject to revision, and the parties to agreements based on this Recommendation|International Standard are encouraged to investigate the possibility of applying the most recent edition of the Recommendations and Standards indicated below. Members

30、of IEC and ISO maintain registers of currently valid International Standards. The Telecommunication Standardization Bureau of the ITU maintains a list of currently valid ITU-T Recommendations. 2.1 Identical Recommendations|International Standards ITU-T Recommendation X.200 (1994)|ISO/IEC7498-1:1994,

31、 Information technology Open Systems Interconnection Basic Reference Model: The Basic Model. ITU-T Recommendation X.216 (1994)|ISO/IEC8822:1994, Information technology Open Systems Interconnection Presentation service definition. ITU-T Recommendation X.217 (1995)|ISO/IEC 8649:1996, Information techn

32、ology Open Systems Interconnection Service definition for the association control service element. ITU-T Recommendation X.225 (1995)|ISO/IEC 8327-1:1996, Information technology Open Systems Interconnection Connection-oriented session protocol: Protocol specification.BSISO/IEC8650-2:1997 2 BSI 04-200

33、0 ITU-T Recommendation X.226 (1994)|ISO/IEC 8823-1:1994, Information technology Open Systems Interconnection Connection-oriented presentation protocol: Protocol specification. ITU-T Recommendation X.227 (1995)|ISO/IEC 8650-1:1996, Information technology Open Systems Interconnection Connection-orient

34、ed protocol for the association control service element: Protocol specification. 2.2 Paired Recommendations|International Standards equivalent in technical contents ITU-T Recommendation X.290 (1995), OSI conformance testing methodology and framework for protocol Recommendations for ITU-T application

35、s General concepts. ISO/IEC 9646-1:1994, Information technology Open Systems Interconnection Conformance testing methodology and framework Part 1: General concepts. ITU-T Recommendation X.296 (1995), OSI conformance testing methodology and framework for protocol Recommendations for ITU-T application

36、s Implementation conformance statements. ISO/IEC 9646-7:1995, Information technology Open Systems Interconnection Conformance testing methodology and framework Part7: Implementation Conformance Statements. 2.3 Additional references CCITT Recommendation X.410 (1984): Message handling systems: Remote

37、operations and reliable transfer server. 3 Definitions For the purposes of this Recommendation|International Standard, the following definitions apply: 3.1 Terms defined in ITU-T Rec. X.227|ISO/IEC 8650-1 3.2 Terms defined in ITU-T Rec. X.290|ISO/IEC 9646-1 a) Implementation conformance statement pr

38、oforma; b) Implementation conformance statement; c) Protocol Implementation Conformance Statement (PICS); d) PICS proforma. 3.3 Additional terms a) Requestor: the PPM that initiates a particular action; b) Acceptor:the PPM that accepts a particular action. 4 Abbreviations For the purposes of this Re

39、commendation, the following abbreviations apply: 5 Conformance A conforming PICS proforma shall be technically equivalent to the ITU-T|ISO/IEC published PICS proforma and shall preserve the numbering and ordering of the items in the ITU-T|ISO/IEC PICS proforma. A PICS which conforms to this Recommen

40、dation|International Standard shall: a) describe an implementation which conforms to ITU-T Rec. X.227|ISO/IEC8650-1; b) be a conforming PICS proforma, which has been completed in accordance with the instruction for completion given inA.2; c) include the information necessary to uniquely identify bot

41、h the supplier and the implementation. ACSE Association Control Service Element APDU Application Protocol Data Unit ICS Implementation Conformance Statement PICS Protocol Implementation Conformance Statement PDU Protocol Data UnitBSISO/IEC8650-2:1997 BSI 04-2000 3 Annex A Protocol Implementation Con

42、formance Statement (PICS) proforma for the ACSE protocol 1) (This annex forms an integral part of this Recommendation|International Standard) A.1 Identification of PICS proforma corrigenda The supplier of the PICS proforma shall identify any corrigenda (i.e. Technical corrigenda or equivalent) to th

43、e published proforma that have been applied. Suppliers of the proforma should modify the proforma, or attach relevant additional pages in order to apply the corrigenda, and then record the application of the corrigenda in Table A.1. Table A.1 A.2 Instructions A.2.1 Purpose and structure of the profo

44、rma The purpose of this PICS proforma is to provide suppliers of implementations of ITU-T Rec. X.227| ISO/IEC8650-1 with a consistent means of stating which capabilities have been implemented. The proforma is in the form of a questionnaire and consists of a set of items. An item is provided for each

45、 capability for which an implementation choice is allowed. Items are also provided for major mandatory capabilities for which no implementation choice is allowed. Each item includes an item number, an item description, a status value specifying the support requirement, and room for a support answer

46、to be provided by the supplier. This subclause provides general information and instructions for completion of the proforma. Subclause A.3 is for identification of the implementation. Subclause A.4 contains the means of specifying, at a high level, the protocol and corrigenda that have been implemen

47、ted. Subclause A.5 contains the global statement of conformance. Subclause A.6 onwards contain tables in which the supplier specifies details of the implementation options chosen. A.2.2 Symbols, terms and abbreviations A.2.2.1 Introduction Notations have been introduced in order to reduce the size o

48、f tables in the PICS proforma. These have allowed the use of multi-column layout where the columns are headed “Status”, and “Support”. The definition of each are given below. Additionally, the following definitions apply: A.2.2.1.1 (PICS) item: A row in a PICS proforma table. A.2.2.1.2 (PICS) questi

49、on: The question to be answered in the intersection of a PICS item and either a support column (i.e. “Is this item supported in the context applying to this table and column”) or supported values column (i.e. “What values are supported for this item in the context applying to this table and column”) in a PICS proforma table. A.2.2.1.3 status (value): An allowed entry in the status column for an item in a PICS proforma table. A.2.2.1.4 (support) answer: An allowed entry in the support or supported