BS ISO IEC IEEE 18882-2017 Information technology Telecommunications and information exchange between systems Ubiquitous green community control network Heterogeneous networks conv.pdf

1、BS ISO/IEC/IEEE 18882:2017Information technology Telecommunications andinformation exchange betweensystems Ubiquitous greencommunity control network:Heterogeneous networksconvergence and scalabilityBSI Standards PublicationBS ISO/IEC/IEEE 18882:2017 BRITISH STANDARDNational forewordThis British Stan

2、dard is the UK implementation of ISO/IEC/IEEE 18882:2017.The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to incl

3、ude all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 95179 4 ICS 35.110 Compliance with a British Standard cannot confer immunity from legal obligations.This Bri

4、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate Text affectedBS ISO/IEC/IEEE 18882:2017Information technology Telecommunications and information exchange between systems Ubiquitous gree

5、n community control network: Heterogeneous networks convergence and scalabilityTechnologies de linformation Tlcommunications et change dinformation entre systmes Protocole de contrle de la communaut verte omniprsente: convergence et extensibilit de rseaux htrognesINTERNATIONAL STANDARDISO/IEC/IEEE18

6、882Reference numberISO/IEC/IEEE 18882:2017(E)First edition2017-02g3 IEEE 201g886BS ISO/IEC/IEEE 18882:2017ii g3 IEEE 201g886 All rights reservedISO/IEC/IEEE 18882:2017(E)COPYRIGHT PROTECTED DOCUMENT IEEE 201g886g4g142g142g3g148g139g137g138g150g149g3g148g135g149g135g148g152g135g134g484g3g24g144g142g1

7、35g149g149g3g145g150g138g135g148g153g139g149g135g3g149g146g135g133g139g976g139g135g134g481g3g144g145g3g146g131g148g150g3g145g136g3g150g138g139g149g3g146g151g132g142g139g133g131g150g139g145g144g3g143g131g155g3g132g135g3g148g135g146g148g145g134g151g133g135g134g3g145g148g3g151g150g139g142g139g156g135g1

8、34g3g145g150g138g135g148g153g139g149g135g3g139g144g3g131g144g155g3g136g145g148g143g3g145g148g3 g132g155g3 g131g144g155g3 g143g135g131g144g149g481g3 g135g142g135g133g150g148g145g144g139g133g3 g145g148g3 g143g135g133g138g131g144g139g133g131g142g481g3 g139g144g133g142g151g134g139g144g137g3 g146g138g145

9、g150g145g133g145g146g155g139g144g137g481g3 g145g148g3 g146g145g149g150g139g144g137g3 g145g144g3 g150g138g135g3 g139g144g150g135g148g144g135g150g3 g145g148g3 g131g144g3 g139g144g150g148g131g144g135g150g481g3 g153g139g150g138g145g151g150g3 g146g148g139g145g148g3g153g148g139g150g150g135g144g3g146g135g1

10、48g143g139g149g149g139g145g144g484g3g19g135g148g143g139g149g149g139g145g144g3g133g131g144g3g132g135g3g148g135g147g151g135g149g150g135g134g3g136g148g145g143g3g12g22g18g3g145g148g3g12g8g8g8g3g131g150g3the respective address belowg3g145g148g3g12g22g18g821g149g3g143g135g143g132g135g148g3g132g145g134g155

11、g3g139g144g3g150g138g135g3g133g145g151g144g150g148g155g3g145g136g3g150g138g135g3g148g135g147g151g135g149g150g135g148g484g12g22g18g3g133g145g146g155g148g139g137g138g150g3g145g136g976g139g133g135g3 g12g144g149g150g139g150g151g150g135g3g145g136g3g8g142g135g133g150g148g139g133g131g142g3g131g144g134g3g8g

12、142g135g133g150g148g145g144g139g133g149g3g8g144g137g139g144g135g135g148g149g481g3g12g144g133Ch. de Blandonnet 8 CP 401 3 Park Avenue, New YorkCH-1214 Vernier, Geneva, Switzerland NY 10016-5997, USATel. +41 22 749 01 11 Fax +41 22 749 09 47 g133g145g146g155g148g139g137g138g150g823g139g149g145g484g145

13、g148g137g3 g149g150g134g149g484g139g146g148g823g139g135g135g135g484g145g148g137www.iso.org www.ieee.orgBS ISO/IEC/IEEE 18882:2017ISO/IEC/IEEE 18882:2017(E)BS ISO/IEC/IEEE 18882:2017ISO/IEC/IEEE 18882:201g26(E) IEEE 2014 All rights reserved iiiForewordISO (the International Organization for Standardi

14、zation) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization

15、to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO

16、and IEC have established a joint technical committee, ISO/IEC JTC 1. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development

17、 process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process

18、and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Stand

19、ards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is called to the possibility that implementation of this standard may require the u

20、se of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or patent claims for which a license may be requi

21、red, for conducting inquiries into the legal validity or scope of patents or patent claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any, or in any licensing agreem

22、ents are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards Assoc

23、iation.ISO/IEC/IEEE 18882 was prepared by the Corporate Advisory Group of the IEEE SA Board of Governors (as IEEE g54g87g71g31888.2g162014). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Informationtechnology, Subcommittee SC 6, Telecommunications and information exchange between system

24、s, in parallel with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO/IEC n

25、ational bodies. BS ISO/IEC/IEEE 18882:2017ISO/IEC/IEEE 18882:2017(E)BS ISO/IEC/IEEE 18882:2017BS ISO/IEC/IEEE 18882:2017IEEE Standard for Ubiquitous Green Community Control Network: Heterogeneous NetworksConvergence and ScalabilitySponsorCorporate Advisory Groupof theIEEE-SA Board of GovernorsApprov

26、ed 27 March 2014IEEE-SA Standards Board IEEE 2014 All rights reservedISO/IEC/IEEE 18882:201g26(E)BS ISO/IEC/IEEE 18882:2017ISO/IEC/IEEE 18882:2017(E)Abstract: This standard describes heterogeneous networks convergence and scalability, specifies the requirements of network convergence, extends the sy

27、stem architecture defined in IEEE Std 1888, IEEE Standard for Ubiquitous Green Community Control Network Protocol,with two new IEEE 1888 Components, i.e., the reconfigurable resolution server (RRS) and the intelligent application resolver (IAR), and generalizes primitive data type expressions and ex

28、plicit field-bus data type management in IEEE 1888 systems. This standard enables IEEE 1888 systems to interoperate with heterogeneous access networks efficiently and improves the efficiency, flexibility, scalability and manageability of IEEE 1888 systems. Keywords: field-bus data type, heterogeneou

29、s network convergence, IEEE 1888.2, intelligent application resolver, reconfigurable resolution server, scalability, primitive data type g120The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Elect

30、ronics Engineers, Inc.All rights reserved. Published 30 May 2014. Printed in the United States of America.IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IE

31、EE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure,

32、 purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the

33、 standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standard

34、s document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT,

35、 INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INC

36、LUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. g55g85g68g81g86g79g68g87g76g82g81g86g3g3The IEEE consensus development process in

37、volves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. g50g73g73g76g70g76g68g79g3g86g87g68g87g72g80g72g81g87g86g3A statement, written or oral, that is not processed

38、in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational course

39、s, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. g38g82g80g80g72g81g87g86g3g82g81g3g86g87g68g81g71g68g85g71g86g3Comments for revision of IEEE Standar

40、ds documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, togethe

41、r with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordin

42、ating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard

43、 is welcome to join the relevant IEEE working group. BS ISO/IEC/IEEE 18882:2017ISO/IEC/IEEE 18882:2017(E)g44g54g50g18g44g40g38g18g44g40g40g40g3g20g27g27g27g21g29g21g19g20g26g11g40g12g3 IEEE 2014 All rights reservedg89g76g76g76Comments on standards should be submitted to the following address: Secret

44、ary, IEEEg16SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA g47g68g90g86g3g68g81g71g3g85g72g74g88g79g68g87g76g82g81g86g3Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply complia

45、nce to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these docume

46、nts may not be construed as doing so. g38g82g83g92g85g76g74g75g87g86g3IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by

47、reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the docume

48、nts. g51g75g82g87g82g70g82g83g76g72g86g3g3Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of li

49、censing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. g56g83g71g68g87g76g81g74g3g82g73g3g44g40g40g40g3g54g87g68g81g71g68g85g71g86g3g71g82g70g88g80g72g81g87g86g3g3Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from tim