BS ISO IEC IEEE 8802-1AX-2016 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Link Agg.pdf

1、BSI Standards PublicationBS ISO/IEC/IEEE 8802-1AX:2016Information technology Telecommunicationsand information exchangebetween systems Local andmetropolitan area networks Specific requirementsPart 1AX: Link AggregationBS ISO/IEC/IEEE 8802-1AX:2016 BRITISH STANDARDNational forewordThis British Standa

2、rd is the UK implementation of ISO/IEC/IEEE8802-1AX:2016.The UK participation in its preparation was entrusted to TechnicalCommittee IST/6, Data communications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to includ

3、e all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 90843 9ICS 35.240.80Compliance with a British Standard cannot confer immunity fromlegal obligations.This British

4、 Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate Text affectedBS ISO/IEC/IEEE 8802-1AX:2016Reference numberISO/IEC/IEEE 8802-1AX:2016(E) IEEE 2014INTERNATIONAL STANDARD ISO/IEC/IEEE8802-1AX

5、First edition2016-01-15Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 1AX: Link Aggregation Technologies de linformation Tlcommunications et change dinformation entre systmes Rseaux locaux et mtropoli

6、tains Exigences spcifiques Partie 1AX: Agrgation de lien BS ISO/IEC/IEEE 8802-1AX:2016ISO/IEC/IEEE 8802-1AX:2016(E) COPYRIGHT PROTECTED DOCUMENT I E E E 2 0 1 4 A ll r ig h t s r e s e r v e d . U n le s s o t h e r w is e s p e c if i e d , n o p a r t o f t h i s p u b l i c a t i o n m a y b e r

7、e p r o d u c e d o r u t i l i z e d i n a n y f o r m o r b y a n y m e a n s ,e le c t r o n ic o r m e c h a n ic a l, in c lu d in g p h o t o c o p y i n g a n d m ic r o f ilm , w i t h o u t p e r m is s io n in w r it in g f r o m I S O , I E C o r I E E E a t t h e r e s p e c t iv ea d d

8、r e s s b e lo w .I n s t it u t e o f E le c t r ic a l a n d E le c t r o n ic s E n g in e e r s , I n c .3 P a r k A v e n u e , N e w Y o r kN Y 1 0 0 1 6 - 5 9 9 7 , U S AE - m a il s t d s . ip r ie e e . o r gW e b w w w . i e e e . o r gP u b lis h e d in S w it z e r la n dii I E E E 2 0 1

9、 4 A ll r ig h t s r e s e r v e dnullSnull nullonullnullright onullnullinulleCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47nullonullnullrightnulliso.orgwww.iso.orgBS ISO/IEC/IEEE 8802-1AX:2016ISO/IEC/IEEE 8802-1AX:2016(E) IEEE 2014 All rights

10、 reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards t

11、hrough technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, a

12、lso take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards

13、 Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute

14、and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. The main task of ISO/IEC

15、 JTC 1 is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is called to

16、 the possibility that implementation of this standard may require the use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identify

17、ing essential patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or scope of patents or patent claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance or a Patent State

18、ment and Licensing Declaration Form, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. F

19、urther information may be obtained from ISO or the IEEE Standards Association. ISO/IEC/IEEE 8802-1AX was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE 8802-1AX-2014). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 6, Telecommunicati

20、ons and information exchange between systems, in parallel with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the maintenance of this document

21、with participation and input from ISO/IEC national bodies. BS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016IEEE Standard for Local and metropolitan area networks Link Aggregation Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Socie

22、ty IEEE Std 802.1AX-2014 (Revision of IEEE Std 802.1AX-2008)BS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016IEEE Std 802.1AX-2014(Revision ofIEEE Std 802.1AX-2008)IEEE Standard for Local and metropolitan area networksLink Aggregatio

23、nSponsorLAN/MAN Standards Committeeof theIEEE Computer SocietyApproved 10 December 2014IEEE SA-Standards BoardBS ISO/IEC/IEEE 8802-1AX:2016BS ISO/IEC/IEEE 8802-1AX:2016The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2014 by The Institut

24、e of Electrical and Electronics Engineers, Inc.All rights reserved. Published 30 December 2014. Printed in the United States of America.IEEE and 802 are registered trademarks in the U.S. Patent fitnessfor a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or comp

25、leteness ofmaterial. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that thereare no othe

26、r ways to produce, test, measure, purchase, market, or provide other goods and services related tothe scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved andissued is subject to change brought about through developments in the state of the art and comm

27、entsreceived from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or otherservices for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by anyother person or entity to another. Any person

28、 utilizing any IEEE Standards document, should rely upon hisor her own independent judgment in the exercise of reasonable care in any given circumstances or, asappropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEEstandard.IN NO EVENT SHALL IEEE B

29、E LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIA

30、BILITY, OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPONANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE ANDREGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.BS ISO/IEC/IEEE 8802-1AX:2016ISO/IEC/IEEE 8802-1AX:2016(E)BS ISO/

31、IEC/IEEE 8802-1AX:2016ivCopyright 2014 IEEE. All rights reserved.TranslationsThe IEEE consensus development process involves the review of documents in English only. In the eventthat an IEEE standard is translated, only the English version published by IEEE should be considered theapproved IEEE stan

32、dard.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards BoardOperations Manual shall not be considered or inferred to be the official position of IEEE or any of itscommittees and shall not be considered to be, or be relied upon as, a form

33、al position of IEEE. At lectures,symposia, seminars, or educational courses, an individual presenting information on IEEE standards shallmake it clear that his or her views should be considered the personal views of that individual rather than theformal position of IEEE. Comments on standardsComment

34、s for revision of IEEE Standards documents are welcome from any interested party, regardless ofmembership affiliation with IEEE. However, IEEE does not provide consulting information or advicepertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of apropo

35、sed change of text, together with appropriate supporting comments. Since IEEE standards represent aconsensus of concerned interests, it is important that any responses to comments and questions also receivethe concurrence of a balance of interests. For this reason, IEEE and the members of its societ

36、ies andStandards Coordinating Committees are not able to provide an instant response to comments or questionsexcept in those cases where the matter has previously been addressed. For the same reason, IEEE does notrespond to interpretation requests. Any person who would like to participate in revisio

37、ns to an IEEEstandard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable la

38、ws and regulations. Compliance with theprovisions of any IEEE Standards document does not imply compliance to any applicable regulatoryrequirements. Implementers of the standard are responsible for observing or referring to the applicableregulatory requirements. IEEE does not, by the publication of

39、its standards, intend to urge action that is notin compliance with applicable laws, and these documents may not be construed as doing so.CopyrightsIEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.They are made available by IEEE and are adopted for

40、 a wide variety of both public and private uses. Theseinclude both use, by reference, in laws and regulations, and use in private self-regulation, standardization,and the promotion of engineering practices and methods. By making these documents available for use andadoption by public authorities and

41、 private users, IEEE does not waive any rights in copyright to thedocuments.BS ISO/IEC/IEEE 8802-1AX:2016 ISO/IEC/IEEE 8802-1AX:2016(E) BS ISO/IEC/IEEE 8802-1AX:2016vCopyright 2014 IEEE. All rights reserved.Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-e

42、xclusive license tophotocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978

43、750 8400. Permission tophotocopy portions of any individual standard for educational classroom use can also be obtained throughthe Copyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any timeby th

44、e issuance of new editions or may be amended from time to time through the issuance of amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corrigenda, or errata then in effect. Every IEEE standa

45、rd is subjected to review at least every ten years. When a document is more than ten yearsold and has not undergone a revision process, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reflect the present state of the art. Users are cautioned to check to det

46、ermine thatthey have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amendedthrough the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/expel/standards.jsp or c

47、ontact IEEE at the address listed previously. For moreinformation about the IEEE SA or IOWAs standards development process, visit the IEEE-SA Website athttp:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.

48、ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errataperiodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standard, no position is taken by th

49、e IEEE with respect to theexistence or validity of any patent rights in connection therewith. If a patent holder or patent applicant hasfiled a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicatewhether the Submitter is willing or unwilling to grant licenses under patent rights without compensation orunder reasonable rates, with reasonable terms and conditions that are demonstrably fr