BS PD CLC TR 62453-509-2009 Field device tool (FDT) interface nspecification — nPart 509 Communication implementation for ncommon object model – IEC 61784 CPF 9《菲尔德设计工具(FDT)接口规范 第5.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 509: Communication implementation for common object model IEC 61784 CPF 9PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/

2、EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSINational forewordThis Published Document is the UK implementation of CLC/TR 62453-509:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and contr

3、ol, includ-ing fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 62573 2ICS 25.040

4、.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDA

5、RDPD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSITECHNICAL REPORT CLC/TR 62453-509 RAPPORT TECHNIQUE TECHNISCHER BERICHT November 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalis

6、ation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 62453-509:2009 E ICS 25.040.40; 35.100.05; 3

7、5.110 English version Field device tool (FDT) interface specification - Part 509: Communication implementation for common object model - IEC 61784 CPF 9 (IEC/TR 62453-509:2009) Spcification des interfaces des outils des dispositifs de terrain (FDT) - Partie 509: Implmentation des communications pour

8、 le modle objet commun - CEI 61784 CPF 9 (CEI/TR 62453-509:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 509: Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) -Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784 (IEC/TR 62453-509:2009) This Technical Report was

9、approved by CENELEC on 2009-10-01. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norw

10、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSICLC/TR 62453-509:2009 - 2 - Foreword The text of document 65E/70/CDV, futur

11、e edition 1 of IEC/TR 62453-509, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as CLC/TR 62453-509 on 2009-10-01. This standard is to

12、be used in conjunction with EN 62453-3xy series. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62453-509:2009 was approved by CENELEC as a Technical Report without any modification. In the official version, for Bibliography, the following note has t

13、o be added for the standard indicated: IEC 61784-1 NOTE Harmonized as EN 61784-1:2008 (not modified). _ PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSI- 3 - CLC/TR 62453-509:2009 Annex ZA (normative) Normative references to

14、international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

15、any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 200

16、9 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 IEC/TR 62453-41 2009 Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model CLC/TR 62453-41 2009 IEC 62453-309 200

17、9 Field device tool interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 EN 62453-309 2009 _ PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSI 2 TR 62453-509 IEC:2009(E) CONTENTS INTRODUCTION

18、.5 1 Scope.6 2 Normative references .6 3 Terms, definitions, symbols, abbreviated terms and conventions 6 3.1 Terms and definitions 6 3.2 Symbols and abbreviated terms.6 3.3 Conventions 7 3.3.1 Data type names and references to data types 7 3.3.2 Vocabulary for requirements7 4 Bus category 7 5 Acces

19、s to instance and device data7 6 Protocol specific usage of general data types.7 7 Protocol specific common data types8 8 Network management data types8 8.1 General .8 8.2 HART device address8 9 Communication data types FDTHARTCommunicationSchema .8 10 Channel parameter data types FDTHARTChannelPara

20、meterSchema 11 11 Device identification .14 11.1 Device type identification data types FDTHARTIdentSchema .14 11.2 Topology scan data types DTMHARTDeviceSchema 14 11.3 Scan identification data types FDTHARTScanIdentSchema15 11.4 Device type identification data types FDTHARTDeviceIdentSchema.16 11.5

21、XSLT Transformation 17 Bibliography24 Figure 1 Part 509 of the IEC 62453 series .5 Table 1 Protocol specific usage of general data types7 PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSITR 62453-509 IEC:2009(E) 5 INTRODUCTION

22、 This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture. The specification is a result of an analysis and design process to develop standard interfaces to facilitate the develo

23、pment of servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate these tools into h

24、igher-level system-wide planning- or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all those involved is of great importance. A dev

25、ice-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this specification. The approach to integration is in general open for all kind of fieldbuss

26、es and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Figure 1 shows how IEC/TR 62453-509 is aligned in the structure of IEC 62453 series. Part 509Communicationimplementationfor common object model IEC 61784 CPF 9Figure 1 Part 509 of the IE

27、C 62453 series PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSI 6 TR 62453-509 IEC:2009(E) FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 509: Communication implementation for common object model IEC 61784 CPF 9 1 Scope

28、 IEC/TR 62453-509, which is a technical report, provides information for integrating the HART1technology into the FDT interface specification (IEC 62453-2). This part of IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it. 2

29、 Normative references The following referenced documents are indispensable for the application of this specification. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies IEC 62453-1:2009, Field

30、 Device Tool (FDT) interface specification Part 1: Overview and guidance IEC 62453-2:2009, Field Device Tool (FDT) interface specification Part 2: Concepts and detailed description IEC/TR 62453-41:2009, Field Device Tool (FDT) interface specification Part 41: Object model integration profile Common

31、object model IEC 62453-309:2009, Field Device Tool (FDT) interface specification Part 309: Communication profile integration IEC 61784 CPF 9 3 Terms, definitions, symbols, abbreviated terms and conventions 3.1 Terms and definitions For the purpose of this document, the terms and definitions given in

32、 IEC 62453-1, IEC 62453-2, and IEC/TR 62453-41 apply. 3.2 Symbols and abbreviated terms For the purpose of this document, the symbols and abbreviations given in IEC 62453-1, IEC 62453-2, and IEC/TR 62453-41 apply. 1HART is the trade name of the product supplied by HART Communication Foundation. This

33、 information is given for convenience of users of this document and does not constitute an endorsement by IEC of the product named. Equivalent products may be used if they can be shown to lead to the same results. PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2

34、010 04:17, Uncontrolled Copy, (c) BSITR 62453-509 IEC:2009(E) 7 3.3 Conventions 3.3.1 Data type names and references to data types The conventions for naming and referencing of data types are explained in IEC 62453-2 Clause A.1 3.3.2 Vocabulary for requirements The following expressions are used whe

35、n specifying requirements. Usage of “shall” or “Mandatory” No exceptions allowed. Usage of “should” or “Recommended” Strong recommendation. It may make sense in special exceptional cases to differ from the described behaviour. Usage of “can or “Optional Function or behaviour may be provided, dependi

36、ng on defined conditions. 4 Bus category IEC 61784 CPF 9 protocol is identified in the attribute busCategory of the BusCategory element by the identifiers, as specified in IEC 62453-309. 5 Access to instance and device data Used at methods: IDtmParameter:GetParameters() IDtmParameter:SetParameters()

37、 These methods shall provide access to at least to all parameters defined in IEC 62453-309. 6 Protocol specific usage of general data types Table 1 shows how general data types are used with IEC 61784 CPF 9 devices. Table 1 Protocol specific usage of general data types Attribute Description for use

38、fdt:address fdt:protocolId fdt:deviceTypeId fdt:deviceTypeInformation fdt:deviceTypeInformationPath fdt:manufacturerId fdt:semanticId fdt:applicationDomain fdt:tag All these attributes of the FDTDatatype schema are used as defined in IEC 62453-309. PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, IS

39、O/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSI 8 TR 62453-509 IEC:2009(E) 7 Protocol specific common data types This clause specifies the protocol specific common data types, which are used in the definition of other data types. The data types described in this clause are d

40、efined for following namespace: Namespace: 8 Network management data types 8.1 General The data types specified in this clause are used at following methods: IDtmParameter:GetParameters IDtmParameter:SetParameters 8.2 HART device address The element (defined in IEC/TR 62453-41) is used for defining

41、the network address of a device. 9 Communication data types FDTHARTCommunicationSchema The data types specified in this clause are used with the methods of IFdtCommunication. The definition of the attribute follows the data type definition as defined in IEC 62453-309. PD CLC/TR 62453-509:2009License

42、d Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSITR 62453-509 IEC:2009(E) 9 PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSI 10 TR 62453-509 IEC:2009(E) Example: Examples for IEC 617

43、84 CPF 9 burst mode The request from the DeviceDTM: PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSITR 62453-509 IEC:2009(E) 11 Answer if the device is already in burst mode: Receiving a burst frame: Unsubscribing: Answer to

44、unsubscribe: 10 Channel parameter data types FDTHARTChannelParameterSchema The XML document describes a how to access an IO value via an IEC 61784 CPF 9 command. The definition of the attributes and elements follows the definition of channel parameter data types as defined in IEC 62453-309. The data

45、 types specified in this clause are used with the following methods: IFdtChannel:GetChannelParameters() IFdtChannel:SetChannelParameters() PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSI 12 TR 62453-509 IEC:2009(E) PD CLC/TR

46、 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSITR 62453-509 IEC:2009(E) 13 Example: PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSI 14 TR 62453-509 IEC:2009(

47、E) 11 Device identification 11.1 Device type identification data types FDTHARTIdentSchema The HARTIdentSchema provides elements and attributes with a protocol specific semantic as well as document nodes without such a mapping (data type definition in IEC 62453-309). 11.2 Topology scan data types DTM

48、HARTDeviceSchema Used at IDtmEvents:OnScanResponse() The XML document describes one entry in the list of scanned IEC 61784 CPF 9-Devices. PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSITR 62453-509 IEC:2009(E) 15 11.3 Scan i

49、dentification data types FDTHARTScanIdentSchema This schema defines the XML document provided by a scan response of a CIP network. The schema defines attributes and elements that are used to provide protocol specific scanning. PD CLC/TR 62453-509:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 04:17, Uncontrolled Copy, (c) BSI 16 TR 62453-509 IEC:2009(E) 11.4 Device