BS PD ISO TS 13399-304-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Solid milling cutters with arbor hole《切削工具数据的表示和交换 三维模型的创建和交换 带有心轴孔的整体铣.pdf

1、BSI Standards PublicationPD ISO/TS 13399-304:2016Cutting tool datarepresentation and exchangePart 304: Creation and exchange of 3Dmodels Solid milling cutters with arborholePD ISO/TS 13399-304:2016 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of ISO/TS13399-304

2、:2016.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessarypro

3、visions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 92389 0ICS 25.100.01; 35.240.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document

4、 was published under the authority of theStandards Policy and Strategy Committee on 29 February 2016.Amendments issued since publicationDate Text affectedPD ISO/TS 13399-304:2016 ISO 2016Cutting tool data representation and exchange Part 304: Creation and exchange of 3D models Solid milling cutters

5、with arbor holeReprsentation et change des donnes relatives aux outils coupants Partie 304: Cration et change de modles 3D Fraises monobloc trou centralTECHNICAL SPECIFICATIONISO/TS13399-304Reference numberISO/TS 13399-304:2016(E)First edition2016-02-01PD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E

6、)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or postin

7、g on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 7

8、49 09 47copyrightiso.orgwww.iso.orgPD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E)Foreword vIntroduction vii1 Scope . 12 Normative references 13 Starting elements, coordinate systems, planes 23.1 General . 23.2 Reference system 23.3 Coordinate system at the cutting part 33.4 Planes 33.5 Cutting ref

9、erence point (CRP) 44 Design of the model . 54.1 Necessary properties for the connection interface feature 55 Plain milling cutter 65.1 General . 65.2 Necessary properties . 65.3 Geometry of the non-cutting part inclusive of the connection 75.4 Geometry of the cutting part . 95.5 Plain milling cutte

10、r, complete . 96 Shell mill 96.1 General . 96.2 Necessary properties 106.3 Geometry of the non-cutting part inclusive of the connection .106.4 Geometry of the cutting part 106.5 Shell mill, complete 107 Thread milling cutter 117.1 General 117.2 Necessary properties 117.3 Geometry of the non-cutting

11、part inclusive of the connection .127.4 Geometry of the cutting part 127.5 Thread milling cutter, complete 128 Slotting cutter .128.1 General 128.2 Necessary properties 138.3 Geometry of the non-cutting part inclusive of the connection .138.4 Geometry of the cutting part 138.5 Slotting cutter, compl

12、ete 149 Pointed profile slotting cutter .149.1 General 149.2 Necessary properties 159.3 Geometry of the non-cutting part inclusive of the connection .159.4 Geometry of the cutting part 169.5 Pointed profile slotting cutter . 1610 Flatted profile slotting cutter .1610.1 General 1610.2 Necessary prope

13、rties 1710.3 Geometry of the non-cutting part inclusive of the connection .1810.4 Geometry of the cutting part 1810.5 Flatted profile slotting cutter, complete . 1811 Concave profile cutter 1811.1 General 18 ISO 2016 All rights reserved iiiContents PagePD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E

14、)11.2 Necessary properties 1911.3 Geometry of the non-cutting part inclusive of the connection .1911.4 Geometry of the cutting part 2011.5 Concave profile cutter, complete 2012 Convex profile cutter .2012.1 General 2012.2 Necessary properties 2112.3 Geometry of the non-cutting part inclusive of the

15、connection .2112.4 Geometry of the cutting part 2112.5 Convex profile cutter, complete . 2113 Corner-rounding cutter 2213.1 General 2213.2 Necessary properties 2313.3 Geometry of the non-cutting part inclusive of the connection .2313.4 Geometry of the cutting part 2313.5 Corner-rounding cutter, comp

16、lete . 2314 Angular milling cutter 2414.1 General 2414.2 Necessary properties 2414.3 Geometry of the non-cutting part inclusive of the connection .2514.4 Geometry of the cutting part 2514.5 Angular milling cutter, complete 2515 Angular profile milling cutter 2615.1 General 2615.2 Necessary propertie

17、s 2615.3 Geometry of the non-cutting part inclusive of the connection .2715.4 Geometry of the cutting part 2715.5 Angular profile milling cutter, complete 2716 Sawing blade 2716.1 General 2716.2 Necessary properties 2816.3 Geometry of the non-cutting part inclusive of the connection .2816.4 Geometry

18、 of the cutting part 2816.5 Sawing blade, complete 2817 Design of details .2917.1 Basics for modelling 2917.2 Contact surfaces, driving features Orientation .2918 Attributes of surfaces Visualization of the model features 2919 Structure of the design elements (tree of model) .2920 Data exchange mode

19、l 30Annex A (informative) Information about nominal dimensions 32Bibliography .33iv ISO 2016 All rights reservedPD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies).

20、 The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-

21、governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are describe

22、d in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to th

23、e possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO

24、list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as we

25、ll as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 29, Small tools.ISO/TS 13399 consists of the following parts, under the general title

26、 Cutting tool data representation and exchange: Part 1: Overview, fundamental principles and general information model Part 2: Reference dictionary for the cutting items Technical Specification Part 3: Reference dictionary for tool items Technical Specification Part 4: Reference dictionary for adapt

27、ive items Technical Specification Part 5: Reference dictionary for assembly items Technical Specification Part 50: Reference dictionary for reference systems and common concepts Technical Specification Part 60: Reference dictionary for connection systems Technical Specification Part 80: Creation and

28、 exchange of 3D models Overview and principles Technical Specification Part 100: Definitions, principles and methods for reference dictionaries Technical Specification Part 150: Usage guidelines Technical Specification Part 201: Creation and exchange of 3D models Regular inserts Technical Specificat

29、ion Part 202: Creation and exchange of 3D models Irregular inserts Technical Specification Part 203: Creation and exchange of 3D models Replaceable inserts for drilling Technical Specification Part 204: Creation and exchange of 3D models Inserts for reaming Technical Specification Part 301: Concept

30、for the design of 3D models based on properties according to ISO/TS 133993: Modelling of threadcutting taps, threadforming taps and threadcutting dies Technical Specification ISO 2016 All rights reserved vPD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E) Part 302: Concept for the design of 3D models

31、based on properties according to ISO/TS 133993: Modelling of solid drills and countersinking tools Technical Specification Part 303: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of end mills with solid cutting edges Technical Specification Part 304: C

32、oncept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of milling cutters with arbor hole and solid cutting edges Technical Specification Part 307: Creation and exchange of 3D models End mills for indexable inserts Technical Specification Part 308: Creation and

33、exchange of 3D models Milling cutters with arbor hole for indexable inserts Technical Specification Part 309: Creation and exchange of 3D models Tool holders for indexable inserts Technical Specification Part 311: Creation and exchange of 3D models Solid reamers Technical Specification Part 312: Cre

34、ation and exchange of 3D models Reamers for indexable inserts Technical Specification Part 401: Creation and exchange of 3D models Converting, extending and reducing adaptive items Technical Specification Part 405: Creation and exchange of 3D models Collets Technical SpecificationThe following parts

35、 are under preparation: Part 70: Graphical data layout Layer settings for tool designs Technical Specification Part 71: Graphical data layout Creation of documents for the standardized data exchange Graphical product information Technical Specification Part 72: Creation of documents for the standard

36、ized data exchange Definition of properties for drawing header and their XMLdata exchange Technical Specification Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring Technical Specification Part 310: Creation and exchange of 3D models Turning to

37、ols with carbide tips Technical Specificationvi ISO 2016 All rights reservedPD ISO/TS 13399-304:2016ISO/TS 13399-304:2016(E)IntroductionThis part of ISO/TS 13399 defines the concept, the terms and the definitions on how to design simplified 3D models of milling cutters with arbor hole and non-indexa

38、ble cutting edges that can be used for NC-programming, simulation of the manufacturing processes and the determination of collision within machining processes. It is not intended to standardize the design of the cutting tool itself.A cutting tool is used in a machine to remove material from a workpi

39、ece by a shearing action at the cutting edges of the tool. Cutting tool data that can be described by ISO/TS 13399 (all parts) include, but are not limited to, everything between the workpiece and the machine tool. Information about inserts, solid tools, assembled tools, adaptors, components and the

40、ir relationships can be represented by ISO/TS 13399 (all parts). The increasing demand providing the end user with 3D models for the purposes defined above is the basis for the development of this series of International Standards.The objective of ISO/TS 13399 (all parts) is to provide the means to

41、represent the information that describes cutting tools in a computer-sensible form that is independent from any particular computer system. The representation will facilitate the processing and exchange of cutting tool data within and between different software systems and computer platforms and sup

42、port the application of this data in manufacturing planning, cutting operations and the supply of tools. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and for archiving. The methods that are use

43、d for these representations are those developed by ISO/TC 184/SC 4 for the representation of product data by using standardized information models and reference dictionaries.Definitions and identifications of dictionary entries are defined by means of standard data that consist of instances of the E

44、XPRESS entity data types defined in the common dictionary schema, resulting from a joint effort between ISO/TC 184/SC 4 and IEC/TC 3/SC 3D and in its extensions defined in ISO 13584-24 and ISO 13584-25. ISO 2016 All rights reserved viiPD ISO/TS 13399-304:2016PD ISO/TS 13399-304:2016Cutting tool data

45、 representation and exchange Part 304: Creation and exchange of 3D models Solid milling cutters with arbor hole1 ScopeThis part of ISO/TS 13399 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole and non-indexable cutting edges, together with the

46、usage of the related properties and domains of values.This part of ISO/TS 13399 specifies a common way of design simplified models that contain the following: definitions and identifications of the design features of milling cutters with arbor hole and non-indexable cutting edges, with an associatio

47、n to the used properties; definitions and identifications of the internal structure of the 3D model that represents the features and the properties of milling cutters with arbor hole and non-indexable cutting edges.The following are outside the scope of this part of ISO/TS 13399: applications where

48、these standard data may be stored or referenced; concept of 3D models for cutting tools; concept of 3D models for cutting items; concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; concept of 3D models for adaptive items; concept of 3D models for

49、assembly items and auxiliary items.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/TS 13399-3, Cutting tool data representation and exchan