BS PD ISO TS 13399-401-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Converting extending and reducing adaptive items《切削工具数据的表示和交换 三维模型的创建和交.pdf

1、BSI Standards PublicationPD ISO/TS 13399-401:2016Cutting tool datarepresentation and exchangePart 401: Creation and exchange of 3Dmodels Converting, extending andreducing adaptive itemsPD ISO/TS 13399-401:2016 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of ISO

2、/TS13399-401:2016.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the

3、necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 84133 0ICS 25.100.01; 35.240.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This Publis

4、hed Document was published under the authority of theStandards Policy and Strategy Committee on 31 March 2016.Amendments issued since publicationDate Text affectedPD ISO/TS 13399-401:2016 ISO 2016Cutting tool data representation and exchange Part 401: Creation and exchange of 3D models Converting, e

5、xtending and reducing adaptive itemsReprsentation et change des donnes relatives aux outils coupants Partie 401: Cration et change de modles 3D Conversion, extension et rduction relatif aux attachementsTECHNICAL SPECIFICATIONISO/TS13399-401Reference numberISO/TS 13399-401:2016(E)First edition2016-02

6、-15PD ISO/TS 13399-401:2016ISO/TS 13399-401:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electroni

7、c or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Ge

8、neva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgPD ISO/TS 13399-401:2016ISO/TS 13399-401:2016(E)Foreword vIntroduction vii1 Scope . 12 Normative references 13 Starting elements, coordinate systems, planes 23.1 General . 23.2 Reference system (PCS primary coordina

9、te system) 23.3 Adaptive item position . 33.3.1 General 33.3.2 Prismatic adaptive position 33.3.3 Round adaptive position . 33.4 Adjustment coordinate system at workpiece side . 33.4.1 General 33.4.2 Designation of coordinate systems at workpiece side 33.4.3 Arrangement of coordinate system workpiec

10、e side 43.5 Mounting coordinate system 53.6 Planes 64 Design of the model . 64.1 General . 64.2 Necessary properties for the connection interface feature 75 Converter, rotationally symmetric . 75.1 General . 75.2 Necessary properties . 85.3 Basic geometry 85.4 Connection on workpiece side . 105.5 Ro

11、tational symmetric converter, complete 116 Converter, stationary .126.1 General 126.2 Necessary properties 126.3 Basic geometry . 136.4 Connection on workpiece side . 156.5 Stationary converter, complete 157 Extender .167.1 General 167.2 Necessary properties 167.3 Basic geometry . 167.4 Connection o

12、n workpiece side . 177.5 Extender, complete . 188 Reducer, primary design .188.1 General 188.2 Necessary properties 198.3 Basic geometry . 198.4 Connection on workpiece side . 208.5 Reducer, primary design, complete 219 Reducer, reverse design .219.1 General 219.2 Necessary properties 229.3 Basic ge

13、ometry . 229.4 Connection on workpiece side . 239.5 Reducer, reverse design, complete 23 ISO 2016 All rights reserved iiiContents PagePD ISO/TS 13399-401:2016ISO/TS 13399-401:2016(E)10 Design of details .2410.1 Basics for modelling 2410.2 Contact surfaces, driving features Orientation .2410.3 Chamfe

14、rs and roundings . 2411 Attributes of surfaces Visualization of the model features 2512 Structure of the design elements (tree of model) .2513 Data exchange model 26Bibliography .27iv ISO 2016 All rights reservedPD ISO/TS 13399-401:2016ISO/TS 13399-401:2016(E)ForewordISO (the International Organizat

15、ion for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established h

16、as the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The

17、procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the edi

18、torial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rig

19、hts identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an expl

20、anation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this docu

21、ment is ISO/TC 29, Small tools.ISO/TS 13399 consists of the following parts, under the general title Cutting tool data representation and exchange: Part 1: Overview, fundamental principles and general information model Part 2: Reference dictionary for the cutting items Technical Specification Part 3

22、: Reference dictionary for tool items Technical Specification Part 4: Reference dictionary for adaptive items Technical Specification Part 5: Reference dictionary for assembly items Technical Specification Part 50: Reference dictionary for reference systems and common concepts Technical Specificatio

23、n Part 60: Reference dictionary for connection systems Technical Specification Part 80: Creation and exchange of 3D models Overview and principles Technical Specification Part 100: Definitions, principles and methods for reference dictionaries Technical Specification Part 150: Usage guidelines Techn

24、ical Specification Part 201: Creation and exchange of 3D models Regular inserts Technical Specification Part 202: Creation and exchange of 3D models Irregular inserts Technical Specification Part 203: Creation and exchange of 3D models Replaceable inserts for drilling Technical Specification Part 20

25、4: Creation and exchange of 3D models Inserts for reaming Technical Specification Part 301: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of threadcutting taps, threadforming taps and threadcutting dies Technical Specification ISO 2016 All rights reser

26、ved vPD ISO/TS 13399-401:2016ISO/TS 13399-401:2016(E) Part 302: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of solid drills and countersinking tools Technical Specification Part 303: Concept for the design of 3D models based on properties according t

27、o ISO/TS 133993: Modelling of end mills with solid cutting edges Technical Specification Part 304: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of milling cutters with arbor hole and solid cutting edges Technical Specification Part 307: Creation and e

28、xchange of 3D models End mills for indexable inserts Technical Specification Part 308: Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts Technical Specification Part 309: Creation and exchange of 3D models Tool holders for indexable inserts Technical Specificat

29、ion Part 311: Creation and exchange of 3D models Solid reamers Technical Specification Part 312: Creation and exchange of 3D models Reamers for indexable inserts Technical Specification Part 401: Creation and exchange of 3D models Converting, extending and reducing adaptive items Technical Specifica

30、tion Part 405: Creation and exchange of 3D models Collets Technical SpecificationThe following parts are under preparation: Part 70: Graphical data layout Layer settings for tool designs Technical Specification Part 71: Graphical data layout Creation of documents for the standardized data exchange G

31、raphical product information Technical Specification Part 72: Creation of documents for the standardized data exchange Definition of properties for drawing header and their XMLdata exchange Technical Specification Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable c

32、artridges for boring Technical Specification Part 310: Creation and exchange of 3D models Turning tools with carbide tips Technical Specificationvi ISO 2016 All rights reservedPD ISO/TS 13399-401:2016ISO/TS 13399-401:2016(E)IntroductionThis part of ISO/TS 13399 defines the concept, the terms and the

33、 definitions on how to design simplified 3D models of converting, extending and reducing adaptors used together with 3D models of cutting tools for NC-programming, simulation of the manufacturing processes and the determination of collision within machining processes. It is not intended to standardi

34、ze the design of the adaptors and cutting tool itself.An adaptive item is used in combination with a cutting tool in a machine to remove material from a workpiece by a shearing action at the cutting edges of the tool. Cutting tool data that can be described by ISO/TS 13399 (all parts) include, but a

35、re not limited to, everything between the workpiece and the machine tool. Information about inserts, solid tools, assembled tools, adaptors, components and their relationships can be represented by ISO/TS 13399 (all parts). The increasing demand providing the end user with 3D models for the purposes

36、 defined above is the basis for the development of this series of International Standard.The objective of ISO/TS 13399 (all parts) is to provide the means to represent the information that describes cutting tools in a computer sensible form that is independent from any particular computer system. Th

37、e representation will facilitate the processing and exchange of cutting tool data within and between different software systems and computer platforms and support the application of this data in manufacturing, planning, cutting operations and the supply of tools. The nature of this description makes

38、 it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and for archiving. The methods that are used for these representations are those developed by ISO/TC 184 for the representation of product data by using standardized information models

39、 and reference dictionaries.Definitions and identifications of dictionary entries are defined by means of standard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from a joint effort between ISO/TC 184/SC 4 and IEC/TC 3/SC 3D and in

40、its extensions defined in ISO 13584-24 and ISO 13584-25. ISO 2016 All rights reserved viiPD ISO/TS 13399-401:2016PD ISO/TS 13399-401:2016Cutting tool data representation and exchange Part 401: Creation and exchange of 3D models Converting, extending and reducing adaptive items1 ScopeThis part of ISO

41、/TS 13399 specifies a concept for the design of adaptive items, limited to any kind of converters, extenders and reducers, together with the usage of the related properties and domains of values.This part of ISO/TS 13399 specifies a common way of designing simplified models that contain the followin

42、g: definitions and identifications of the design features of converting, extending and reducing adaptors, with an association to the used properties; definitions and identifications of the internal structure of the 3D model that represents the features and the properties of converting, extending and

43、 reducing adaptors.The following are outside the scope of this part of ISO/TS 13399: applications where these standard data may be stored or referenced; concept of 3D models for cutting tools; concept of 3D models for cutting items; concept of 3D models for tool items; concept of 3D models for other

44、 adaptive items not described in the scope of this part of ISO/TS 13399; concept of 3D models for assembly items and auxiliary items.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated re

45、ferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 10889-1, Tool holders with cylindrical shank Part 1: Cylindrical shank, location bore Technical delivery conditionsISO 12164-1, Hollow taper interfac

46、e with flange contact surface Part 1: Shanks DimensionsISO/TS 13399-3, Cutting tool data representation and exchange Part 3: Reference dictionary for tool itemsISO/TS 13399-4, Cutting tool data representation and exchange Part 4: Reference dictionary for adaptive itemsISO/TS 13399-50, Cutting tool d

47、ata representation and exchange Part 50: Reference dictionary for reference systems and common conceptsTECHNICAL SPECIFICATION ISO/TS 13399-401:2016(E) ISO 2016 All rights reserved 1PD ISO/TS 13399-401:2016ISO/TS 13399-401:2016(E)ISO/TS 13399-60, Cutting tool data representation and exchange Part 60

48、: Reference dictionary for connection systemsISO/TS 13399-80, Cutting tool data representation and exchange Part 80: Creation and exchange of 3D models Overview and principlesISO 26622-1, Modular taper interface with ball track system Part 1: Dimensions and designation of shanksISO 26623-1, Polygona

49、l taper interface with flange contact surface Part 1: Dimensions and designation of shanksISO 26623-2, Polygonal taper interface with flange contact surface Part 2: Dimensions and designation of receivers3 Starting elements, coordinate systems, planes3.1 GeneralThe modelling of the 3D models shall be done by means of nominal dimensions.WARNING There is no guarantee that the