CAN CGSB-4 2 NO 6-2013 Textile test methods Textiles - Woven fabrics - Construction - Methods of analysis - Part 2 Determination of number of threads per unit length.pdf

1、CAN/CGSB-4.2 No. 6-2013(ISO 7211-2:1984, MOD)Supersedes CAN/CGSB-4.2 No. 6-M89 ISO 7211-2:1984, IDTTextile test methodsTextiles Woven fabrics Construction Methods of analysis Part 2: Determination of number of threads per unit length(ISO 7211-2:1984, MOD)ICS 59.080.30National Standard of Canada ISO

2、1984. CGSB 2013. All rights reserved. Unauthorized reproduction is strictly prohibited.International Organization for StandardizationThe CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this National Standard of Canada has been developed is a government agency within Public Works and Go

3、vernment Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and o

4、ther users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada

5、as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produc

6、es standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standa

7、rds. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate am

8、endment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, is found in the CGSB Catalogue, which is published annually and is available without charge upon request. More information is availab

9、le about CGSB products and services at our Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb. Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particula

10、r purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult t

11、he appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever perf

12、ormed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of a

13、ny such patent rights is entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The Standards Council of Canada (SCC) is the coordinating body of the

14、Canadian standardization network, which is composed of people and organizations involved in the development, promotion and implementation of standards. Through the collaborative efforts of Canadian standardization network members, standardization is helping to advance the social and economic well-be

15、ing of Canada and to safeguard the health and safety of Canadians. The networks efforts are overseen by SCC. The principal objectives of SCC are to foster and promote voluntary standardization as a means of advancing the national economy, supporting sustainable development, benefiting the health, sa

16、fety and welfare of workers and the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in relation to standardization. An important facet of the Canadian standards development system is the use of the following princ

17、iples: consensus; equal access and effective participation by concerned interests; respect for diverse interests and identification of those who should be afforded access to provide the needed balance of interests; mechanism for dispute resolution; openness and transparency; open access by intereste

18、d parties to the procedures guiding the standards development process; clarity with respect to the processes; and Canadian interest consideration as the initial basis for the development of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an SCC-accredited SDO and

19、 approved by the SCC according to NSC approval requirements. Approval does not refer to the technical content of the standard, as this remains the responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable

20、 extent, a balance of representation of general interests, producers, regulators, users (including consumers) and others with relevant interests, as may be appropriate to the subject at hand. NSCs are intended to make a significant and timely contribution to the Canadian interest. Those who have a n

21、eed to apply standards are encouraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO that publishes the standard. The responsibility for approving standards as NSCs rests with: Standards Council of Canada 270 Albert

22、Street, Suite 200 Ottawa, Ontario K1P 6N7, CANADA How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongctpsgc-pwg

23、sc.gc.ca on the Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb NATIONAL STANDARD OF CANADA CAN/CGSB-4.2 No. 6-2013 (ISO 7211-2:1984, MOD)Supersedes CAN/CGSB-4.2 No. 6-M89 ISO 7211-2:1984, IDTTextile test methods Textiles Woven fabrics Construction Methods of analysis Part 2: Determination of number of threads

24、per unit length (ISO 7211-2:1984, MOD)NATIONAL STANDARD OF CANADA CAN/CGSB-3.14-2006Reviewed by the Approved by the Canadian General Standards BoardPublished June 2013 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the Min

25、ister of Public Works and Government Services, the Minister responsible for the Canadian General Standards Board (2013). No part of this publication may be reproduced in any form without the prior permission of the publisher. Prepared by the International Organization for StandardizationCETTE NORME

26、NATIONALE DU CANADA EST DISPONIBLE EN VERSIONSFRANAISE ET ANGLAISE.CAN/CGSB-4.2 No. 6-2013 (ISO 7211-2:1984, MOD) CANADIAN GENERAL STANDARDS BOARDCommittee on Textile Test Methods and Terminology(Voting membership at date of approval)General Interest CategoryBatcheller, J. University of AlbertaCarri

27、ck, D. ConsultantDavie, N. ConsultantLiu, S. University of ManitobaMan, T.M. ConsultantTait, C. National Defence/DSSPMProducer CategoryAdam, C. PGI/Difco Performance Fabrics Inc.Bowen, D. DuPont Protection TechnologiesLawson, L. Walls Apparel Canada Inc.Leonard, D. Invista (Canada) Co.Schumann, E. L

28、incoln Fabrics Ltd.Zukowsky, D. Marv Holland Apparel Ltd.Regulator CategoryAndersson, C. Health CanadaUser CategoryBourget, S. National Defence/QETEHong, T. Exova Group Ltd.Izquierdo, V. Textile Technologies CentreLitva (Scalzo), M. Canada Border Services AgencyMacLeod, J. Public Works and Governmen

29、t Services CanadaSirimanna, A. Sears Canada Inc.Tebbs, C. International Drycleaners CongressSecretary (non-voting)Grabowski, M. Canadian General Standards BoardNo. 74-2011 iCAN/CGSB-4.2 No. 6-2013 (ISO 7211-2:1984, MOD) Supersedes CAN/CGSB-4.2 No. 6-M89 ISO 7211-2:1984, IDTPreface to the National St

30、andard of CanadaThis National Standard of Canada has been prepared by the CGSB Committee on Textile Test Methods and Terminology and has been approved as a National Standard of Canada by the Standards Council of Canada. It is a modified adoption of the International Standard ISO 7211-2, Textiles Wov

31、en fabrics Construction Method of analysis Part 2: Determination of number of threads per unit length, published 1984-03-15 by the International Organization for Standardization (ISO), and is reprinted with the permission of ISO. The International Standard was reviewed by the CGSB committee to deter

32、mine its suitability for Canadian use. It was agreed to use it with the standard temperate atmosphere for conditioning. This conditioning is also described in CAN/CGSB-4.2 No. 2.A Canadian deviation has been added to 7.2, first paragraph, after the first sentence: Add “The specimens shall be cut wit

33、h the edges parallel to the warp and weft yarns.”Explanation: The National Standard of Canada modifies the requirement of the test procedure for Method A Dissection of fabric to better reflect the technical conditions used in the Canadian industry.Canadian Note: The CGSB Committee agreed that in Can

34、ada, for the purpose of this standard, the word “thread” should be interpreted as “yarn.” In this context, “yarn” and “thread” are defined as follows:Yarn A continuous strand of textile fibres that may be composed of endless filaments or shorter fibres twisted or otherwise held together. Yarns may b

35、e single or ply, and form the basic elements for cabled yarn, fabric, thread and twine.Thread The term is often applied loosely to yarn used for weaving and knitting, and is commonly used to describe fabric count as threads per unit length.Throughout this standard, the words “National Standard of Ca

36、nada” are to be understood as replacing the words “International Standard” wherever they appear.Some terminology and conventions are not identical to those used in other test methods within CAN/CGSB-4.2 Textile Test Methods. For example, the comma is used throughout this standard as a decimal marker

37、 rather than the point.The testing and evaluation of a product against this method may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this method has the responsibility to c

38、onsult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, where

39、ver performed.The CGSB National Standards of Canada may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740The International Standards may be obtained from IHS Canada, 1 Antares Drive, Suite 200, Ot

40、tawa, Ontario K2E 8C4. Telephone 613-237-4250 or 1-800-267-8220. Fax 613-237-4251.Copyright NoticeThe Canadian adoption of this International Standard as a National Standard of Canada contains information copyright protected by the Canadian General Standards Board. All rights reserved. No part of th

41、is National Standard of Canada may be reproduced in any form without the prior permission of the Canadian General Standards Board. ISO material is reprinted with permission.Requests for permission to reproduce this National Standard of Canada or parts thereof should be addressed to:The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6Copyright violators will be prosecuted to the full extent of the law.