CAN CGSB-4 2 NO 8 2-2016 Textile test methods Textiles - Determination of twist in yarns - Direct counting method.pdf

1、 CAN/CGSB-4.2 No. 8.2-2016 ISO 2061:2010, IDT Supersedes CAN/CGSB-4.2 No. 8.2-2004/ISO 2061:1995 International Organization for Standardization ISO 2010. CGSB 2016. All rights reserved. Unauthorized reproduction is strictly prohibited. Textile test methods Textiles Determination of twist in yarns Di

2、rect counting method (ISO 2061:2010, IDT) National Standard of Canada Canadian General Standards Board The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed, is a government agency within Public Services and Procurement Canada. CGSB is engaged in the prod

3、uction of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational insti

4、tutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives.CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The

5、standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as National Standards of Canada, CGSB produces standards to meet particular needs, in re

6、sponse to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy and Procedures Manual for the Development and Maintenance of Standards.CGSB standards are s

7、ubject to review and revision to ensure that they keep abreast of technological progress. CGSB will initiate the review of this standard within five years of the date of publication. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committ

8、ees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards.An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, is found in the CGSB Catalogue at our Web site www.tpsgc-pwgsc.gc.

9、ca/ongc-cgsb/index-eng.html along with more information about CGSB products and services.Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their parti

10、cular purpose.The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consul

11、t the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever p

12、erformed.Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of

13、 any such patent rights is entirely their own responsibility.LanguageIn this Standard, “shall” states a mandatory requirement, “should” expresses a recommendation and “may” is used to express an option or that which is permissible within the limits of this Standard. Notes accompanying clauses do not

14、 include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.Further information on CGSB and its

15、 services and standards may be obtained from:The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6A National Standard of Canada is a standard developed by an SCC- accredited Standards Development Organization (SDO), and approved by the Standards Council of Canada (

16、SCC), in accordance with SCCs: Requirements and Guidance-Accreditation for Standards Development Organizations, and Requirements and Guidance-Approval of National Standards of Canada Designation. More information on National Standard requirements can be found at www.scc.ca. An SCC-approved standard

17、reflects the consensus of a number of experts whose collective interests provide, to the greatest practicable extent, a balance of representation of affected stakeholders. National Standards of Canada are intended to make a significant and timely contribution to the Canadian interest. SCC is a Crown

18、 corporation within the portfolio of Industry Canada. With the goal of enhancing Canadas economic competitiveness and social well-being, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian participation in standards development, an

19、d identifies strategies to advance Canadian standardization efforts. Accreditation services are provided by SCC to various customers, including product certifiers, testing laboratories, and standards development organizations. A list of SCC programs and accredited bodies is publicly available at www

20、.scc.ca. Users should always obtain the latest edition of a National Standard of Canada from the standards development organization responsible for its publication, as these documents are subject to periodic review.The responsibility for approving standards as NSCs rests with:Standards Council of Ca

21、nada 55 Metcalfe Street, Suite 600 Ottawa, Ontario K1P 6L5, CANADAby telephone 819-956-0425 or 1-800-665-2472by fax 819-956-5740by mail CGSB Sales Centre Gatineau, Canada K1A 1G6in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebecby email ncr.cgsb-ongctpsgc-pwgsc.gc.caon the

22、Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb/index-eng.htmlHow to order Publications:National Standard of Canada CAN/CGSB-4.2 No. 8.2-2016 ISO 2061:2010, IDT Supersedes CAN/CGSB-4.2 No. 8.2-2004/ISO 2061:1995 Textile test methods Textiles Determination of twist in yarns Direct counting method (ISO 2061:2010,

23、 IDT) CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONS FRANAISE ET ANGLAISE. Published January 2016 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Public Services and Procurement, the Minister res

24、ponsible for the Canadian General Standards Board (2016). No part of this publication may be reproduced in any form without the prior permission of the publisher. ICS 59.080.20 CAN/CGSB-4.2 No. 8.2-2016 ISO 2061:2010, IDT CGSB 2016 All rights reserved CANADIAN GENERAL STANDARDS BOARD Committee on Te

25、xtile Test Methods and Terminology (Voting membership at date of approval) Chair Davie, N. Consultant (General interest) General interest category Batcheller, J. University of Alberta Carrick, D. Consultant Horne, L. University of Manitoba Man, T.M. Consultant Schumann, E. Consultant Tait, C. Nation

26、al Defence/DSSPM Producer category Adam, C. Tencate Protective Fabrics Lankin, G. LAC-MAC Limited Lawson, L. Davey Textile Solutions ONeill, B. London Hospital Linen Service Inc. Orzel, A. Lincoln Fabrics Ltd. Taylor, V. Invista (Canada) Co. Regulator category Korpan, M. Health Canada, CPSD Risk Man

27、agement Bureau Szabo, J. Industry Canada User category Andersson, C. Health Canada, CPSD Risk Assessment Bureau Bowie, K. Public Works and Government Services Canada DEntremont, E. Royal Canadian Mounted Police Izquierdo, V. Textile Technologies Centre Litva, M. Canada Border Services Agency Smith,

28、I. Exova Group Ltd. Tebbs, C. International Drycleaners Congress Zhao, J. National Defence/QETE Secretary (non-voting) Grabowski, M. Canadian General Standards Board Acknowledgment is made for the translation of this National Standard of Canada by the Translation Bureau of Public Services and Procur

29、ement Canada. i CGSB 2016 All rights reserved CAN/CGSB-4.2 No. 8.2-2016 ISO 2061:2010, IDT Supersedes CAN/CGSB-4.2 No. 8.2-2004/ISO 2061:1995 Preface to the National Standard of Canada This National Standard of Canada has been prepared by the CGSB Committee on Textile Test Methods and Terminology an

30、d has been approved as a National Standard of Canada by the Standards Council of Canada. It is identical in content and in layout with International Standard ISO 2061, Textiles Determination of twist in yarns Direct counting method, published 2010-08-01 by the International Organization for Standard

31、ization (ISO), and is reprinted with the permission of ISO. The international standard was reviewed by the CGSB committee to determine its suitability for Canadian use. It was agreed to use it in total without editorial changes. Throughout this standard, the words “National Standard of Canada” are t

32、o be understood as replacing the words “International Standard” wherever they appear. Some terminology and conventions are not identical to those used in other test methods within CAN/CGSB-4.2 Textile Test Methods. For example, the comma is used throughout this standard as a decimal marker rather th

33、an the point. The following National Standards of Canada correspond to the referenced ISO standards: CANADA ISO CAN/CGSB-4.2 No. 8.3 ISO 2 ISO 2 CAN/CGSB-4.2 No. 2 ISO 139 The testing and evaluation of a product against this method may require the use of materials and equipment that could be hazardo

34、us. This method does not purport to address all the safety aspects associated with its use. Anyone using this method has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior

35、 to its use. The CGSB National Standards of Canada may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740. E-mail ncr.cgsb-ongctpsgc-pwgsc.gc.ca. Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb/index-eng.

36、html. The International Standards may be obtained from IHS Global Canada Ltd., 200-1331 MacLeod Trail SE, Calgary, Alberta T2G 0K3, telephone 613-237-4250 or 1-800-267-8220, fax 613-237-4251, Web site . Reference numberISO 2061:2010(E)ISO 2010INTERNATIONAL STANDARD ISO2061Third edition2010-08-01Text

37、iles Determination of twist in yarns Direct counting method Textiles Dtermination de la torsion des fils Mthode par comptage direct ISO 2061:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall n

38、ot be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Ado

39、be is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO

40、member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

41、or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47

42、 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2010 All rights reservedISO 2061:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv 1 Scope1 2 Normative references2 3 Terms and definitions .2 4 Principle3 5 Apparatus.3 6 Standard atmosphere3 7 Sampling.3 8 Tes

43、t specimens4 8.1 Length.4 8.1.1 Single spun yarns4 8.1.2 Single multifilament, plied and cabled yarns .4 8.2 Selection.4 8.3 Number of test specimens4 9 Procedure 1 Determination of the direction of twist.5 10 Procedure 2 Determination of the amount of twist .6 10.1 Preliminary procedure 6 10.2 Sing

44、le, spun yarn.6 10.3 Single, multifilament yarns.6 10.4 Plied yarns .7 10.5 Cabled yarns 7 11 Calculation of results 7 11.1 Average twist per specimen.7 11.2 Average twist per sample .8 11.3 Variation of observations .8 11.4 Change in length on untwisting.8 11.5 Twist factor ().8 12 Expression of re

45、sults9 13 Test report9 13.1 Single yarns .9 13.2 Plied yarns .10 13.3 Cabled yarns 10 Annex A (informative) Suggested procedure for sampling 11 Bibliography12 ISO 2061:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation o

46、f national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. In

47、ternational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with

48、the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval

49、 by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2061 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 23, Fibres and yarns. This third edition cancels and replaces the second edition (ISO 2061:1995),