CAN CGSB-44 227-2017 Free-standing office desk table storage products and components.pdf

1、CAN/CGSB-44.227-2017Supersedes CAN/CGSB-44.227-2008National Standard of CanadaCanadian General Standards BoardFree-standing office desk/table, storage products and componentsThe CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed, is a government agency wit

2、hin Public Services and Procurement Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producer

3、s, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives.CGSB has been accredited by the Standards C

4、ouncil of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as National Stand

5、ards of Canada, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy and Procedures Manua

6、l for the Development and Maintenance of Standards.CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. CGSB will initiate the review of this standard within five years of the date of publication. Suggestions for their improvement, which are a

7、lways welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards.An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructi

8、ons, is found in the CGSB Catalogue at our Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb/index-eng.html along with more information about CGSB products and services.Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibilit

9、y of the users of the standard to judge its suitability for their particular purpose.The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated wi

10、th its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injur

11、y or damage that may occur during or as the result of tests, wherever performed.Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held responsible for identifying any or all such patent rights. Users of th

12、is standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.LanguageIn this Standard, “shall” states a mandatory requirement, “should” expresses a recommendation and “may” is used to express an option or that which is permissibl

13、e within the limits of this Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Annexes are designated normative (mandatory) or informative (non-man

14、datory) to define their application.Further information on CGSB and its services and standards may be obtained from:The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6A National Standard of Canada is a standard developed by an SCC- accredited Standards Developmen

15、t Organization (SDO), and approved by the Standards Council of Canada (SCC), in accordance with SCCs: Requirements and Guidance-Accreditation for Standards Development Organizations, and Requirements and Guidance-Approval of National Standards of Canada Designation. More information on National Stan

16、dard requirements can be found at www.scc.ca. An SCC-approved standard reflects the consensus of a number of experts whose collective interests provide, to the greatest practicable extent, a balance of representation of affected stakeholders. National Standards of Canada are intended to make a signi

17、ficant and timely contribution to the Canadian interest. SCC is a Crown corporation within the portfolio of Industry Canada. With the goal of enhancing Canadas economic competitiveness and social well-being, SCC leads and facilitates the development and use of national and international standards. S

18、CC also coordinates Canadian participation in standards development, and identifies strategies to advance Canadian standardization efforts. Accreditation services are provided by SCC to various customers, including product certifiers, testing laboratories, and standards development organizations. A

19、list of SCC programs and accredited bodies is publicly available at www.scc.ca. Users should always obtain the latest edition of a National Standard of Canada from the standards development organization responsible for its publication, as these documents are subject to periodic review.The responsibi

20、lity for approving standards as NSCs rests with:Standards Council of Canada 55 Metcalfe Street, Suite 600 Ottawa, Ontario K1P 6L5, CANADAby telephone 819-956-0425 or 1-800-665-2472by fax 819-956-5740by mail CGSB Sales Centre Gatineau, Canada K1A 1G6in person Place du Portage Phase III, 6B1 11 Laurie

21、r Street Gatineau, Quebecby email ncr.cgsb-ongctpsgc-pwgsc.gc.caon the Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb/index-eng.htmlHow to order Publications:Published October 2017 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the M

22、inister of Public Services and Procurement, the Minister responsible for the Canadian General Standards Board (2017).No part of this publication may be reproduced in any form without the prior permission of the publisher.Free-standing office desk/table, storage products and componentsCETTE NORME NAT

23、IONALE DU CANADA EST DISPONIBLE EN VERSIONS FRANAISE ET ANGLAISE.ICS 97.140NATIONAL STANDARD OF CANADA CAN/CGSB-44.227-2017Supersedes CAN/CGSB-44.227-2008CAN/CGSB-44.227-2017 CGSB 2017 All rights reservedCANADIAN GENERAL STANDARDS BOARDFree-standing Office Desk Products and Components(Voting members

24、hip at date of approval)Chair (Voting)Comtois, M. Micom Laboratories Inc. (General Interest)General interest categoryPanning, D. BIFMA InternationalJantz, J. IntertekStables, L. Workplace Safety and Insurance BoardProducer categoryBrochu, J. Teknion Limited Ruster, R. Herman Miller Inc.Carmona, P. C

25、orrectional Services Canada (CORCAN)Barber, P. Compx WaterlooDykstra, T. Haworth Inc.Musculus, J. Steelcase Inc.Worthy, K. The Global GroupUser categoryBach, A. Canada Revenue AgencyChoo, C. Public Services and Procurement CanadaThomaes, S. CIBC Development CorporationWalkom, E. City Of EdmontonSecr

26、etary (Non-voting)Panu-Anghel, C. Canadian General Standards BoardAcknowledgment is made for the translation of this National Standard of Canada by the Translation Bureau of Public Services and Procurement Canada.CAN/CGSB-44.227-2017i CGSB 2017 All rights reservedContents Page1 Scope . 12 Normative

27、references . 13 Terms and definitions . 34 General requirements . 45 Detailed requirements for finishes 66 Detailed requirements for components 77 Preparation for delivery 118 Testing 119 Marking 1110 Options . 111 CGSB 2017 All rights reservedCAN/CGSB-44.227-2017Supersedes CAN/CGSB-44.227-2008Free-

28、standing office desk/table, storage products and components1 ScopeThis standard provides dimensional and performance requirements for safety, durability and structural adequacy of free-standing components of office desk/table and storage products, including benching systems. Vertical filing cabinets

29、 are not considered storage products for the purpose of this standard and are not covered in this standard.This standard also provides dimensional and adjustment requirements that respect generally accepted ergonomics guidelines or standards, such as those of CAN/CSA-ISO 9241-5-00(R2016), BIFMA G1-2

30、013, CAESAR FINAL REPORT Vol. I and II, June 2002 as its source of anthropometric data. The dimensional and adjustment requirements aim to address the estimated needs of the 5th to 95th percentile of adult office workers.The selected methods for measuring desk products and components and for assessi

31、ng their performance are based on the actual field and product-testing experience of the members of the Canadian General Standards Board Committee on Free-standing Office Desk Products and Components.Quantities and dimensions used in this standard are given in metric units with imperial equivalents

32、shown in brackets where appropriate. The metric units shall be regarded as official in the event of dispute.The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safet

33、y aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish health and safety practices in conjunction with any applicable regulatory requirements prior to its use.2 Normative referencesThe following normative documents

34、 contain provisions that, through reference in this text, constitute provisions of this National Standard of Canada. The referenced documents may be obtained from the sources noted below.NOTE The addresses provided below were valid at the date of publication of this standard.An undated reference is

35、to the latest edition or revision of the reference or document in question, unless otherwise specified by the authority applying this standard. A dated reference is to the specified revision or edition of the reference or document in question.2.1 Canadian Standards Association (CSA)CAN/CSA-ISO 9241-

36、5-00(R2016) Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) Part 5: Workstation Layout and Postural RequirementsC22.2 No. 9.0 General Requirements for LuminairesC22.2 No. 12 Portable Luminaires.2.1.1 SourceThe above may be obtained from CSA Group, Standards Sales, 178 Rex

37、dale Blvd., Toronto, Ontario M9W 1R3 Canada. Telephone 416-747-4044 or 1-800-463-6727. Fax 416-747-2510. E-mail salescsagroup.org. Web site www.shopcsa.ca.2CAN/CGSB-44.227-2017 CGSB 2017 All rights reserved2.2 American Association of Textile Chemists and Colorists (AATCC)EP 1-2012 Grey Scale for Col

38、or Change.2.2.1 SourceThe above may be obtained from the American Association of Textile Chemists and Colorists, P.O. Box 12215, 1 Davis Drive, Research Triangle Park, NC 27709, U.S.A, telephone 919-549-8141, fax 919-549-8933, Web site www.aatcc.org, or from IHS Markit, 200-1331 MacLeod Trail SE, Ca

39、lgary, Alberta T2G 0K3, telephone 613-237-4250 or 1-800-267-8220, fax 613-237-4251, Web site .2.3 American National Standards Institute (ANSI)/ BIFMA InternationalANSI/BIFMA X5.5-2014 Desk ProductsANSI/BIFMA X5.9-2012 Storage Units.2.3.1 SourceThe above may be obtained from the American National Sta

40、ndards Institute, 25 West 43rd Street, New York, NY 10036, U.S.A., telephone 212-642-4980, fax 212-398-0023, Web site www.ansi.org, or from BIFMA International, 2680 Horizon Drive S.E., Suite A-1, Grand Rapids, MI 49546-7500, U.S.A, telephone 616-285-3963, fax 616-285-3765, e-mail emailbifma.org, We

41、b site www.bifma.org.2.4 American National Standards Institute (ANSI)/National Electrical Manufacturers Association (NEMA)ANSI/NEMA LD 3-2005 High-Pressure Decorative Laminates.2.4.1 SourceThe above may be obtained from the American National Standards Institute, 25 West 43rd Street, New York, NY 100

42、36, U.S.A., telephone 212-642-4980, fax 212-398-0023, Web site www.ansi.org, or from the National Electrical Manufacturers Association, 1300 North 17th Street, Suite 1752, Rosslyn, Virginia 22209, U.S.A., telephone 703-841-3200, fax 703-849-5100, Web site www.nema.org.2.5 ASTM InternationalC297-15 S

43、tandard Test Method for Flatwise Tensile Strength of Sandwich Constructions D523-14 Standard Test Method for Specular GlossD3359-09e2 Standard Test Methods for Measuring Adhesion by Tape TestD3363-05 (2011)e2 Standard Test Method for Film Hardness by Pencil TestD4060-14 Standard Test Method for Abra

44、sion Resistance of Organic Coatings by the Taber Abraser.2.5.1 SourceThe above may be obtained from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, U.S.A., telephone 610-832-9585, fax 610-832-9555, Web site www.astm.org, or from IHS Markit, 200-1331 MacLeod Trail SE, Cal

45、gary, Alberta T2G 0K3, telephone 613-237-4250 or 1-800-267-8220, fax 613-237-4251, Web site .CAN/CGSB-44.227-20173 CGSB 2017 All rights reserved2.6 BIFMABIFMA G1-2013 Ergonomics Guideline for Furniture Used in Office Work Spaces Designed for Computer Use. 2.6.1 SourceThe above may be obtained from B

46、IFMA International, 678 Front Avenue NW, Suite 150 Grand Rapids, MI 49504-5368, U.S.A., telephone 616-285-3963, fax 616-285-3765, e-mail emailbifma.org, Web site www.bifma.org.2.7 International Organization for Standardization (ISO)ISO/IEC 17025 General requirements for the competence of testing and

47、 calibration laboratories.2.7.1 SourceThe above may be obtained from IHS Markit, 200-1331 MacLeod Trail SE, Calgary, Alberta T2G 0K3, telephone 613-237-4250 or 1-800-267-8220, fax 613-237-4251, Web site .2.8 National Technical Information Service (NTIS)CAESAR Final Report Vol.ICivilian American and

48、European Surface Anthropometry Resource (CAESAR) Final Report, Vol.I, Experimental Designs and Data Description, June 2002CAESAR Final Report Vol.IICivilian American and European Surface Anthropometry Resource (CAESAR) Final Report, Vol.II Detailed Methodology and Descriptions, June 20022.8.1 Source

49、The above may be obtained from NTIS, 5301 Shawnee Road, Alexandria, VA 22312, telephone 1-800-553-6847 or (703) 605-6900, fax (703) 605-6880, e-mail: ordersntis.gov, Web site www.ntis.gov. 3 Terms and definitionsFor the purposes of this National Standard of Canada, the terms and definitions in ANSI/BIFMA X5.5- 2014 and X5.9-2012, and the following terms and definitions apply.3.1articulating keyboard support surface keyboard support surface offering continuous