CAN CGSB-98 2-2011 National Flag of Canada (Indoor Use).pdf

1、 CAN/CGSB-98.2-2011Supersedes CAN/CGSB-98.2-92National Flag of Canada (Indoor use)ICS 99.020.10National Standard of CanadaThe CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this National Standard of Canada has been developed is a government agency within Public Works and Government Se

2、rvices Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users,

3、 retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a nation

4、al standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standard

5、s to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standards. CGSB s

6、tandards are subject to review and revision to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment she

7、ets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, is found in the CGSB Catalogue, which is published annually and is available without charge upon request. More information is available about CG

8、SB products and services at our Web site www.ongc-cgsb.gc.ca. Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing

9、and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorit

10、ies and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is dra

11、wn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights i

12、s entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the coordinating body of the National Standards System, a

13、coalition of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects of the SCC are to foster and promote voluntary standardization as a means of advancing the national economy, benefit

14、ing the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in the field of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an accredited Standard

15、s Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. A NSC reflects a consensus of a number of capable individuals whose collective i

16、nterests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard, which is capable of making a signif

17、icant and timely contribution to the national interest. Those who have a need to apply standards are encouraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO, which publishes the standard. The responsibility for app

18、roving standards as National Standards of Canada rests with the: Standards Council of Canada 200-270 Albert Street Ottawa, Ontario K1P 6N7 How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du

19、Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongcpwgsc.gc.ca on the Web www.ongc-cgsb.gc.ca NATIONAL STANDARD OF CANADA CAN/CGSB-98.2-2011Supersedes CAN/CGSB-98.2-92 National Flag of Canada (Indoor use)NATIONAL STANDARD OF CANADA CAN/CGSB-3.14-2006Prepared by the Appro

20、ved by the Canadian General Standards Board Standards Council of CanadaPublished April 2011 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Public Works and Government Services, the Minister responsible for

21、the Canadian General Standards Board (2011). No part of this publication may be reproduced in any form without the prior permission of the publisher.CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONSFRANAISE ET ANGLAISE.CAN/CGSB-98.2-2011CANADIAN GENERAL STANDARDS BOARDCommittee on the Natio

22、nal Flag of Canada(Voting membership at date of approval)ChairBauerle, J.1Bodycote Materials Testing Canada Inc.General Interest CategoryBatcheller, J. University of AlbertaDavie, N. ConsultantGagnon, M. Canadian Heritage/Contracting and Materiel Management Horne, L. University of ManitobaIzquierdo,

23、 V. Textile Technologies CentreZhao, J. National Defence/QETEZwinkels, J. National Research Council of CanadaProducer CategoryArsenault, C. Drapeaux et Bannires Ltendard Inc.Braverman, S. International Flag & Banner Inc.Dawood, A. Scythes Inc.Geurtsen, O. Tri-Tex Co. Inc.Law, I. Flags UnlimitedSloan

24、e, R. Flag Connection Inc.Stavinga, B. Invista (Canada) Co.White, R. Textile ArtcraftUser CategoryBacon, R. Canadian Heritage/State Ceremonial and Corporate Events Fauvelle, C. National Capital CommissionCarrick, D. National Defence/DSSPMMacLeod, J. Public Works and Government Services Canada/ Cloth

25、ing & Textile DivisionPaquette, R. Public Works and Government Services Canada/ Contracting & ProcurementWardroper, A. Royal Canadian Mounted PoliceSecretary (non-voting)Grabowski, M. Canadian General Standards BoardAcknowledgment is made for the translation of this National Standard of Canada by th

26、e Translation Bureau of Public Works and Government Services Canada.1General interest CGSB 2011 All rights reservedCAN/CGSB-98.2-2011iCGSB 2011 All rights reservedContents1 Scope . 12 Normative references 13 Classification . 23.1 Types . 23.2 Classes 33.3 Sizes 34 General requirements . 35 Detailed

27、requirements . 35.1 Design 35.2 Colours . 35.3 Colourfastness . 45.4 Length (L) and width (W) . 55.5 Materials 55.5.1 Flag 55.5.2 Header . 55.5.3 Sewing thread . 65.5.4 Tie tapes (Type 2 only) . 65.5.5 Leather tabs (Type 3 only) 65.5.6 Ornamental fringe, cord and tassels (Class A only) 65.6 Construc

28、tion 65.6.1 General 65.6.2 Printed flags 65.6.3 Appliqud flags . 65.6.4 Seams and stitching . 66 Preparation for delivery . 76.1 Packaging and packing 76.2 Labelling 77 Inspection . 77.1 Sampling . 78 Notes 88.1 Options . 88.2 Related publications 8PageCAN/CGSB-98.2-20111CGSB 2011 All rights reserve

29、dNational Flag of Canada (Indoor use) Scope1 This standard applies to the design, colour, materials, construction and performance requirements of the National Flag of Canada intended for indoor use.The testing and evaluation of a product against this standard may require the use of materials and equ

30、ipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicab

31、le regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed.Normative references 2 The following normative documents contain provisions that, through reference in this te

32、xt, constitute provisions of this National Standard of Canada. The referenced documents may be obtained from the sources noted below.An undated reference is to the latest edition or revision of the reference or document in question, unless otherwise specified by the authority applying this standard.

33、 A dated reference is to the specified revision or edition of the reference or document in question. However, parties to agreements based on this National Standard of Canada are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below.

34、 Canadian General Standards Board 2.1 CAN/CGSB-4.2 Textile Test Methods:No. 4.1 Textiles Fabrics Determination of Width and LengthNo. 5.1 Unit Mass of FabricsNo. 18.3/ISO 105-B02 Textiles Tests for Colourfastness Part B02: Colourfastness to Artificial light: Xenon Arc Fading Lamp TestNo. 19.1 Colour

35、fastness to Washing Accelerated Tests Launder-OmeterNo. 22 Colourfastness to Rubbing (Crocking)No. 25.1 Dimensional Change in WettingNo. 27.1 Flame Resistance Vertical Burning TestNo. 29.1 Colourfastness to Dry Cleaning Solvent4-GP-85 Nylon Thread (Continuous Multifilament)4-GP-97 Polyester Thread (

36、Continuous Multifilament)CAN/CGSB-86.1 Care Labelling of TextilesCAN/CGSB-54.1 Part 1/ISO 4915 Stitches and Seams Part 1: Textiles Stitch Types Classification and Terminology.2CAN/CGSB-98.2-2011CGSB 2011 All rights reservedSource 2.1.1 The above may be obtained from the Canadian General Standards Bo

37、ard, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740. E-mail ncr.cgsb-ongctpsgc-pwgsc.gc.ca. Web site www.ongc-cgsb.gc.ca.American Society for Testing and Materials (ASTM)2.2 D1388-1996 (2002) Standard Test Method for Stiffness of FabricsE308 Standa

38、rd Practice for Computing the Colors of Objects by Using the CIE System.Source2.2.1 The above may be obtained from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, U.S.A., telephone 610-832-9585, fax 610-832-9555, or from IHS Canada, 1 Antares Drive, Suite 200, Ottawa, On

39、tario K2E 8C4, telephone 613-237-4250 or 1-800-387-4408, fax 613-237-4251, Web site . International Commission on Illumination (CIE)2.3 CIE S 014-1/E2006 / ISO 11664-1 Colorimetry Part 1 : CIE Standard Colorimetric ObserversCIE S 014-2/E2006 / ISO 11664-2 Colorimetry Part 2 : CIE Standard Illuminant

40、s.Source2.3.1 The above may be obtained from the CIE Central Bureau, Kegelgasse 27, A-1030 Vienna, Austria. Telephone +43 1 71432870. Fax +45 1 714318718. Web site www.cie.co.at. Classification 3 The flag shall be supplied in the following types, classes and sizes as specified (clause 8.1).Types3.1

41、Type Subtype In accordance with figures 1- Header with open-sleeve 1A Integral header 6 and 9 (Sections A-A, B-B, D-D)1B Separate header 6 and 11 (Sections A-A, B-B, D-D)2- Header with open-sleeve and tie tapes 2A Integral header 7 and 9 (Sections A-A, B-B, C-C, E-E)2B Separate header 7 and 11 (Sect

42、ions A-A, B-B, C-C, E-E)3- Header with open-sleeve and leather tabs3A Integral header 8, 9 (Sections A-A, B-B), and 10 (Section F-F)3B Separate header 8, 11 (Sections A-A, B-B), and 12 (Section F-F)CAN/CGSB-98.2-20113CGSB 2011 All rights reservedClasses3.2 Class A With ornamental fringe, cord and ta

43、sselsClass B Without ornamental fringe, cord and tassels.Sizes3.3 Size 1 12 x 24 cmSize 2 15 x 30 cmSize 3 20 x 40 cmSize 4 30 x 60 cmSize 5 45 x 90 cmSize 6 65 x 130 cmSize 7 82 x 164 cmSize 8 90 x 180 cm.General requirements 4 The flag shall be free of defects in materials and workmanship that may

44、 affect its appearance or serviceability.Detailed requirements 5 Design5.1 The flag shall be of the proportions two by length and one by width, containing in its centre a white square the depth of the flag, with a single red maple leaf centred therein, in accordance with Figure 1.Colours 5.2 The red

45、 and white colours shall have the following CIE (International Commission on Illumination) colour co-ordinates when measured in accordance with ASTM E308 using CIE Standard 1964 IIluminant D65 and the CIE 1964 Standard Colorimetric Observer with specular reflection excluded:Table 1 Colorimetric requ

46、irementsRed: White:x = 0.576 0.028 x = 0.328 0.012y = 0.315 0.012 y = 0.344 0.015Y = 9.5 1.5 Y = 78.0 3.04CAN/CGSB-98.2-2011CGSB 2011 All rights reservedColourfastness5.3 The colourfastness of the flag shall be in accordance with the requirements of Table 2.Table 2 Finished flag fabric requirementsP

47、roperty Requirement Test Method CAN/CGSB-4.2aWeave Plain, 1 x 1 Mass, g/m2, min. 120 No. 5.1Dimensional change in wetting, % limit warp weft22No. 25.1Colourfastness, min.to lightbto washingd colour change for red portion staining for white portionto dry cleaningd colour change for red portion staini

48、ng for whiteto crocking, drye colour change stainingAATCC L5 or L7, Grey Scale 4Grey Scale 4Grey Scale 4Grey Scale 5No. 18.3/ISO 105-B02cNo. 19.1, Test No. 1No. 29.1No. 22Flammability (average for 5 samples) Char length 100 mmAfter flame 2 sNo burning drips or debrisNo. 27.1Flexural rigidity No less

49、 than 200 mg/cm(Option A)ASTM D1388-1996 (2002)aUnless otherwise indicated. bTo be specified (clause 8.1). cSoda-lime/borosilicate system.dSample must be red and white.eRepeat dry crocking test rubbing half-red and half-white each time. There shall be no observable streaking, smearing or staining onto the half-white rubbed parts.CAN/CGSB-98.2-20115CGSB 2011 All rights reservedLength (L) and width (W)5.4 The flag shall be o