CAN CSA-A82-2014 Fired masonry brick made from clay or shale (Second Edition Updated No 1 March 2015).pdf

1、REVISED MARCH 2015CAN/CSA-A82-14National Standard of Canada(approved March 2015)Fired masonry brick made from clay orshaleLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards

2、Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or

3、 verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular pu

4、rpose or use, its merchantability, or its non-infringementof any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this document

5、s compliance with any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER

6、CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO

7、OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entit

8、y or to perform any duty owed by any person or entity to another person or entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all u

9、se of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publish

10、es.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted

11、 to the contrary), and allinventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayvio

12、late laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in t

13、his document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the

14、 validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: l

15、oad this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and on

16、ly if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you

17、 do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the term

18、s and conditions of this Legal Notice.Revision HistoryA82-14, Fired masonry brick made from clay or shaleNational Standard of Canada MARCH 2015Outside front cover, National Standard of Canada text, title page, and preface.Standards Update ServiceCAN/CSA-A82-14March 2014Title: Fired masonry brick mad

19、e from clay or shaleTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2422669.If you require assistance, please e-mail techsupportcsagroup.org or call 41

20、6-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.Canadian Standards Association (operating as “CSA Group”), underwhose auspices this National Standard has been produced, waschartered in 1919 and accredited by the Standards Co

21、uncil ofCanada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged instandards development and certification activities.CSA Group standards reflect a national consensus of producers andusers including manufacturers, consumers, reta

22、ilers, unions andprofessional organizations, and governmental agencies. Thestandards are used widely by industry and commerce and oftenadopted by municipal, provincial, and federal governments in theirregulations, particularly in the fields of health, safety, building andconstruction, and the enviro

23、nment.Individuals, companies, and associations across Canada indicatetheir support for CSA Groups standards development byvolunteering their time and skills to Committee work and supportingCSA Groups objectives through sustaining memberships. The morethan 7000 committee volunteers and the 2000 susta

24、iningmemberships together form CSA Groups total membership fromwhich its Directors are chosen. Sustaining memberships represent amajor source of income for CSA Groups standards developmentactivities.CSA Group offers certification and testing services in support of andas an extension to its standards

25、 development activities. To ensurethe integrity of its certification process, CSA Group regularly andcontinually audits and inspects products that bear theCSA Group Mark.In addition to its head office and laboratory complex in Toronto, CSAGroup has regional branch offices in major centres across Can

26、adaand inspection and testing agencies in eight countries. Since 1919,CSA Group has developed the necessary expertise to meet itscorporate mission: CSA Group is an independent serviceorganization whose mission is to provide an open and effectiveforum for activities facilitating the exchange of goods

27、 and servicesthrough the use of standards, certification and related services tomeet national and international needs.For further information on CSA Group services, write toCSA Group178 Rexdale BoulevardToronto, Ontario, M9W 1R3CanadaThe Standards Council of Canada (SCC) is the coordinating body oft

28、he Canadian standardization network, which is composed of peopleand organizations involved in the development, promotion andimplementation of standards. Through the collaborative efforts ofCanadian standardization network members, standardization ishelping to advance the social and economic well-bei

29、ng of Canadaand to safeguard the health and safety of Canadians. The networksefforts are overseen by SCC.The principal objectives of SCC are to foster and promote voluntarystandardization as a means of advancing the national economy,supporting sustainable development, benefiting the health, safetyan

30、d welfare of workers and the public, assisting and protecting theconsumer, facilitating domestic and international trade, andfurthering international cooperation in relation to standardization.An important facet of the Canadian standards development systemis the use of the following principles: cons

31、ensus; equal access andeffective participation by concerned interests; respect for diverseinterests and identification of those who should be afforded accessto provide the needed balance of interests; mechanism for disputeresolution; openness and transparency; open access by interestedparties to the

32、 procedures guiding the standards developmentprocess; clarity with respect to the processes; and Canadian interestconsideration as the initial basis for the development of standards.A National Standard of Canada (NSC) is a standard prepared orreviewed by an SCC-accredited SDO and approved by the SCC

33、according to NSC approval requirements. Approval does not refer tothe technical content of the standard, as this remains theresponsibility of the SDO. An NSC reflects a consensus of a numberof capable individuals whose collective interests provide, to thegreatest practicable extent, a balance of rep

34、resentation of generalinterests, producers, regulators, users (including consumers) andothers with relevant interests, as may be appropriate to the subjectat hand. NSCs are intended to make a significant and timelycontribution to the Canadian interest.Those who have a need to apply standards are enc

35、ouraged to useNSCs. These standards are subject to periodic review. Users of NSCsare cautioned to obtain the latest edition from the SDO thatpublishes the standard.The responsibility for approving standards as NSCs rests withStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P

36、 6N7CanadaCette Norme Nationale du Canada est disponible en versions franaise et anglaise.Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility ofthe users to judge its suitability for their particular purpose.TM

37、A trade-mark of the Canadian Standards Association, operating as “CSA Group”ICS 91.100.25ISBN 978-1-77139-301-0 2014 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoeverwithout the prior permission of the publisher.Published in March 2014 by CSA GroupA n

38、ot-for-profit private sector organization178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R3To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association,operating as “CS

39、A Group”Prepared byApproved byFired masonry brick made from clayor shaleCAN/CSA-A82-14(approved March 2015)National Standard of CanadaCAN/CSA-A82-14 Fired masonry brick made from clay or shaleMarch 2014 2014 CSA Group 1ContentsTechnical Committee on Brick and Hollow Tile 5Preface 70 Introduction 81

40、Scope 82 Reference publications 93 Definitions 104 Materials 114.1 General 114.2 Materials other than clay or shale 115 Grades 116 Types 117 Freeze-thaw durability 127.1 Establishing the grade of brick 127.2 Exterior Grade (EG) 127.2.1 Acceptance criteria 127.2.2 Absorption testing 127.2.3 Freeze-th

41、aw testing 127.3 Interior grade (IG) 138 Finish 138.1 Surface colour 138.2 Surface treatments 138.3 Surface defects 138.4 Texture and colour 149 Specialty brick 1410 Dimensions 1410.1 Measurement 1410.2 Size 1410.3 Warpage 1410.4 Out-of-square 1411 Coring, frogging, and webs 1511.1 Cores and cells 1

42、511.2 Frogs 1511.3 Web thickness 15CAN/CSA-A82-14 Fired masonry brick made from clay or shaleMarch 2014 2014 CSA Group 212 Sampling of specimens 1512.1 General 1512.2 Number of specimens 1512.3 Retesting 1512.4 Preparation of specimens 1612.4.1 Half-brick specimens 1612.4.2 Identification 1612.4.3 C

43、leaning 1612.5 Drying 1612.6 Cooling 1613 Compressive strength test 1613.1 Test specimens 1613.1.1 Number of specimens 1613.1.2 Size of test specimens 1713.1.3 Specimen orientation 1713.1.4 Area 1713.2 Calculation of areas 1713.2.1 Apparatus and measurement 1713.2.2 Gross area 1713.2.3 Net area 1713

44、.3 Capping 1713.4 Loading procedure 1813.5 Speed of testing 1813.6 Calculation and reporting of compressive strength 1913.6.1 Calculation 1913.6.2 Reporting 1914 Twenty-four-hour cold water and five-hour boiling water absorption tests 1914.1 Twenty-four-hour cold water absorption test 1914.1.1 Test

45、specimens 1914.1.2 Apparatus 1914.1.3 Procedure 1914.1.4 Calculation and reporting of 24 h cold water absorption 2014.2 Five-hour boiling water absorption test 2014.2.1 Test specimens 2014.2.2 Procedure 2014.2.3 Calculation and reporting of 5 h boiling water absorption 2114.2.4 Saturation coefficien

46、t 2115 Freeze-thaw performance test 2115.1 Test specimens 2115.2 Apparatus 2215.2.1 Freezing chamber 2215.2.2 Trays 2215.2.3 Supports 2215.2.4 Apparatus 2215.2.5 Thawing tank 2215.3 Procedure 22CAN/CSA-A82-14 Fired masonry brick made from clay or shaleMarch 2014 2014 CSA Group 315.3.1 Drying and coo

47、ling 2215.3.2 Determining mass 2215.3.3 Submersion 2315.3.4 Exposure to freezing 2315.3.5 Thawing 2315.3.6 Duration of test 2315.3.7 Interruptions in the test schedule 2315.3.8 Final drying and cooling 2315.4 Calculation and reporting of loss of mass due to freezing and thawing 2315.4.1 Calculation

48、2315.4.2 Reporting 2316 Initial rate of absorption test 2416.1 Test specimens 2416.2 Apparatus 2416.2.1 Tray 2416.2.2 Supports 2416.2.3 Water level control 2416.2.4 Apparatus 2416.2.5 Constant-temperature room 2416.2.6 Timing device 2416.3 Procedure 2416.3.1 Measurement of bed face and initial deter

49、mination of mass 2416.3.2 Placement of tray 2416.3.3 Placement of specimens 2516.3.4 Redetermination of mass 2516.4 Calculation and reporting 2517 Efflorescence test 2517.1 Test specimens 2517.2 Trays 2517.3 Procedure 2617.3.1 Placement of specimens 2617.3.2 Reference specimens 2617.3.3 Drying 2617.4 Examination and rating 2618 Size measurement 2618.1 Specimens 2618.2 Apparatus 2618.3 Procedure 2618.4 Calculation and reporting 2719 Warpage measurement 2719.1 Specimens 2719.2 Apparatus 2719.3 Procedure 2719.4 Reporting 27CAN/CSA-A82-14 Fired masonry brick made fr