CAN CSA-B45 SERIES-2002 Plumbing Fixtures (Fifth Edition Update No 1 June 2003 Update No 2 April 2004 Update No 3 September 2005 Update No 4 July 2007 Update No 5 June 2009).pdf

1、B45 Series-02(reaffirmed 2013)Plumbing fixturesLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints

2、and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provide

3、d without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual p

4、roperty rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, M

5、EMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION

6、, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE

7、S, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this docu

8、ment is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publi

9、shes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or elec

10、tronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trad

11、e secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redr

12、ess for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA

13、shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for inform

14、ational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limi

15、ted copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Not

16、ice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and

17、 if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Update No. 5CAN/CSA-B45 Series-02June 2009Note: General Instructions for CSA Standards are now called Updates. Please contact C

18、SA Information Products Sales or visit www.ShopCSA.ca for information about the CSA Standards Update Service.Title: Plumbing fixtures originally published December 2002Revisions issued: Update No. 1 June 2003Update No. 2 April 2004Supplement No. 1 October 2004Update No. 3 September 2005Update No. 4

19、July 2007If you are missing any updates, please contact CSA Information Products Sales or visit www.ShopCSA.ca.The following revisions have been formally approved and are marked by the symbol delta () in the margin on the attached replacement pages:NoneNoneCAN/CSA-B45.1-02: Standard withdrawn (super

20、seded by ASME A112.19.2-2008/CSA B45.1-08)CAN/CSA-B45.2-02: Standard withdrawn (superseded by ASME A112.19.1-2008/CSA B45.2-08)CAN/CSA-B45.3-02: Standard withdrawn (superseded by ASME A112.19.1-2008/CSA B45.2-08)CAN/CSA-B45.4-02: Standard withdrawn (superseded by ASME A112.19.3-2008/CSA B45.4-08)CAN

21、/CSA-B45 Series-02 originally consisted of 141 pages (xv preliminary and 126 text), each dated December 2002. It now consists of the following pages:viixii, xv, 9, 10, 15, 16, 2124, 3954, 8590, 93100, 103108, 111114, 117120, and 1231265982Update your copy by inserting these revised pages.Keep the pa

22、ges you remove for reference.RevisedNewDeletedDecember 2002June 2003 11, 12, 91, and 92April 2004Cover, title pages (i, 1, 2, 83, 84, 101, 102, 109, 110, 115, 116, 121, and 122), and copyright page (ii)October 2004 xiii, xiv, 3, 4, 8A, 17, 18, 2528, 30A, 30B, 3338A, and 5558CSeptember 2005 iii, iv,

23、viA, 1920B, and 30C30FJuly 2007 v, vi, 58, 13, 14, 29, 30, 31, and 32June 2009(Title page replaced June 2009)Prepared byApproved byStandards Council of CanadaNational Standard of CanadaPublished in December 2002 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectr

24、um Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-B45.1-02 (withdrawn)Ceramic Plumbing FixturesNote: CAN/CSA-B45.1-02 has been withdrawn and superseded by ASME A112.19.2-2008/CSA B45.1-08. Pages 61 to 66 have been delete

25、d and should be removed from the Series.Prepared byApproved byStandards Council of CanadaNational Standard of CanadaPublished in December 2002 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727

26、 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-B45.2-02 (withdrawn)Enamelled Cast-Iron Plumbing FixturesNote: CAN/CSA-B45.2-02 has been withdrawn and superseded by ASME A112.19.1-2008/CSA B45.2-08. Pages 69 and 70 have been deleted and should be removed from the Series.(Title page repl

27、aced June 2009)Prepared byApproved byStandards Council of CanadaNational Standard of CanadaPublished in December 2002 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our On

28、line Store at www.ShopCSA.caCAN/CSA-B45.3-02 (withdrawn)Porcelain-Enamelled Steel Plumbing FixturesNote: CAN/CSA-B45.3-02 has been withdrawn and superseded by ASME A112.19.1-2008/CSA B45.2-08. Pages 73 to 76 have been deleted and should be removed from the Series.(Title page replaced June 2009)Prepa

29、red byApproved byStandards Council of CanadaNational Standard of CanadaPublished in December 2002 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.Sh

30、opCSA.caCAN/CSA-B45.4-02 (withdrawn)Stainless Steel Plumbing FixturesNote: CAN/CSA-B45.4-02 has been withdrawn and superseded by ASME A112.19.3-2008/CSA B45.4-08. Pages 79 to 82 have been deleted and should be removed from the Series.(Title page replaced June 2009)Update No. 4 CAN/CSA-B45 Series-02

31、July 2007 Note: General Instructions for CSA Standards are now called Updates. Please contact CSA Information Products Sales or visit www.ShopCSA.ca for information about the CSA Standards Update Service. Title: Plumbing Fixtures originally published December 2002 Revisions issued: Update No. 1 June

32、 2003 Update No. 2 April 2004 Supplement No. 1 October 2004 Update No. 3 September 2005 If you are missing any updates, please contact CSA Information Products Sales or visit www.ShopCSA.ca. The following revisions have been formally approved and are marked by the symbol delta () in the margin on th

33、e attached replacement pages: Revised CAN/CSA-B45 Series-02: Contents CAN/CSA-B45.0-02: Clauses 2, 3, and 15.8.6B.4 CAN/CSA-B45.1-02: Clauses 5.1 and 6.1.2 New CAN/CSA-B45.0-02: Clauses 8.7 and 15.15 Deleted None CAN/CSA-B45 Series-02 originally consisted of 141 pages (xv preliminary and 126 text),

34、each dated December 2002. It now consists of the following pages: December 2002 viixii, xv, 9, 10, 15, 16, 2124, 3954, 61, 62, 65, 66, 69, 70, 7376, 7982, 8590, 93100, 103108, 111114, 117120, and 123126 June 2003 11, 12, 91, and 92 April 2004 Cover, title pages (i, 1, 2, 59, 60, 67, 68, 71, 72, 77,

35、78, 83, 84, 101, 102, 109, 110, 115, 116, 121, and 122), and copyright page (ii) October 2004 xiii, xiv, 3, 4, 8A, 17, 18, 2528, 30A, 30B, 3338A, and 5558C September 2005 iii, iv, viA, 1920B, and 30C30F July 2007 v, vi, 58, 13, 14, 29, 30, 31, 32, 63, and 64 Update your copy by inserting these revis

36、ed pages. Keep the pages you remove for reference. Canadian Standards Association Plumbing Fixtures July 2007 (Replaces p. v, September 2005) v 15.4 Corrosion Resistance Test 22 15.5 Warpage Test 23 15.6 Structural Integrity Tests 23 15.6.1 Rim, Threshold, Seat, and Bottom Test 23 15.6.2 Unsupported

37、 Area Load Test 24 15.6.3 Area-Impact-Load Test 24 15.6.4 Static-Load Test for Bidets and Water Closets 24 15.6.5 Static-Load Test for Laundry Tubs 24 15.7 Overflow Test for Lavatories, Laundry Tubs, and Bidets 25 15.8 Waste Removal and Water Consumption for Water Closets and Urinals 25 15.8.1 Stand

38、ardization of Apparatus and the Water Supply System to Facilitate Preparation for Testing and Obtaining Uniformity and Reporting of Test Results 25 15.8.2 Gravity-Tank-Type Water Closets 26 15.8.3 Pressurized Flushing Devices 27 15.8.4 Water Closet Auger Test 27 15.8.5 Average Water Closet/Urinal Co

39、nsumption 27 15.8.6 Trap-Seal Depth Determination Test 27 15.8.6A Trap-Seal Restoration Test 28 15.8.6B Water Consumption Test 28 15.8.6C Granule and Ball Test 29 15.8.6D Surface Wash Test 30 15.8.6.E Mixed Media Test 30 15.8.6F Drain Line Transport Characterization Test 30A 15.8.6G Overflow Test fo

40、r Gravity Tanks 30B 15.8.6H Requirements for Dual-Flush Water Closets 30C 15.8.7 Urinals 30D 15.8.8 Trap-Seal Depth Determination 30D 15.8.9 Insulated Tank Test 30D 15.8.10 Resistance-to-Stoppage Test for Non-Water-Consuming Urinals 30D 15.8.11 Tightness-of-Removable-Trap Test for Non-Water-Consumin

41、g Urinals 30E 15.8.12 Odour Evaluation Test for Non-Water-Consuming Urinals 30E 15.9 Acid Resistance Tests 30F 15.10 Tiling-Flange Fixture Seal Test 31 15.11 Deleted 15.12 Load Test Grab Bars 31 15.13 Vibration Test Kitchen Sinks 32 15.14 Joint Seal Test 32 15.15 Bathtubs with Pressure Sealed Doors

42、32 16. Marking and Packaging 32 16.1 Installation Instructions 32 16.2 Marking 33 Tables 35 Figures 38 B45.1, Ceramic Plumbing Fixtures 1. Scope 61 2. Definitions 61 3. General Requirements 61 3.1 Materials 61 3.2 Thickness 62 B45 Series-02 Canadian Standards Association July 2007 vi (Replaces p. vi

43、, September 2005) 3.3 Glazed Surfaces 62 3.4 Blemishes and Defects 62 3.5 Warpage Tolerances 62 3.6 Waste Outlet Fittings 62 4. Test Requirements 62 4.1 Red Ink Test 62 4.2 Water Absorption Test 62 4.3 Crazing Test 62 5. Vitreous Ceramic China 63 5.1 Glazed Surfaces 63 5.2 Water Absorption Test 63 6

44、. Nonvitreous Ceramic China 63 6.1 Glazed Surfaces 63 6.2 Water Absorption Test 63 7. Test Methods 63 7.1 Red Ink Test 63 7.2 Water Absorption Test 63 7.3 Crazing Test 64 Tables 64 B45.2, Enamelled Cast-Iron Plumbing Fixtures 1. Scope 69 2. General Requirements 69 2.1 Thickness 69 2.2 Surface Finish

45、 69 2.3 Blemishes and Defects 69 2.4 Warpage Tolerances for All Fixtures 70 Tables 70 B45.3, Porcelain-Enamelled Steel Plumbing Fixtures 1. Scope 73 2. Definition 73 3. General Requirements 73 3.1 Surface Finish 73 3.2 Blemishes and Defects 74 3.3 Warpage Tolerances for All Fixtures 74 Table 75 B45.

46、4, Stainless Steel Plumbing Fixtures 1. Scope 79 2. Definitions 79 Canadian Standards Association General Requirements for Plumbing Fixtures July 2007 (Replaces p. 5, September 2005) 5 Gravity flush tank a device that stores a specified quantity of water. When actuated, it discharges the quantity of

47、 water (plus some throughflow from the potable water supply system) into the bowl, using the force of gravity. Pressurized flushing device (PFD) a device that is designed to use, but not restricted to using, the force contained within the water supply and that is actuated by flushing. Glaze a cerami

48、c coating matured to a glassy state on a formed ceramic material. Gloss finish a finish that gives a reading of more than 55 units when measured in accordance with ASTM D 523. Grab bar a bar or similar device integrated with a fixture, located wholly or partially in the critical support area, and de

49、signed to be grasped by the hand for the purpose of assisting a person entering, leaving, or moving around the bathing area. Grip rails a bar, handle, or similar device integrated with a bathtub fixture, not located in the critical support area, but located on the rim or below the rim within the bathtub compartment area, and designed to be grasped by the hand for the purpose of assisting a person entering, leaving, chang