CAN CSA-C22 2 NO 262-2004 Optical fiber cable and communication cable raceway systems (First Edition).pdf

1、CAN/CSA-C22.2 No. 262-04A National Standard of Canada(reaffirmed 2013)Optical fiber cable and communication cable raceway systemsLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council

2、of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the

3、content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or us

4、e, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any

5、 applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NO

6、T LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR US

7、E OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed

8、 by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the informat

9、ion contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and owners

10、hipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in t

11、his document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs intellectual property and may give rise to a right in CSA to seek legal

12、 redress for such use, modification, copying, or disclosure. CSA reserves all intellectual property rights in this document.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the foll

13、owing:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have

14、 such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this d

15、ocument.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your accept

16、ance of the terms and conditions of this Legal Notice.Standards Update ServiceCAN/CSA-C22.2 No. 262-04March 2004Title: Optical fiber cable and communication cable raceway systemsPagination: 14 pages (viii preliminary and 6 text), each dated March 2004To register for e-mail notification about any upd

17、ates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2015656.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to

18、find out how we protect your personal information.The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstat

19、utory, voluntary membership association engaged in standards development and certification activities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are

20、used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support f

21、or CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Director

22、s are chosen. Sustaining memberships represent a major source of income for CSAs standards development activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process

23、, the Association regularly and continually audits and inspects products that bear the CSA Mark. In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the As

24、sociation has developed the necessary expertise to meet its corporate mission: CSA is an independent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related ser

25、vices to meet national and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada is the coordinating body of the National Standards system, a federation of inde

26、pendent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the healt

27、h, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and o

28、ne which reflects a reasonable agreement among the views of a number of capable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in ha

29、nd. It normally is a standard which is capable of making a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval

30、does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards development organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to p

31、eriodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard.The responsibility for approving National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nation

32、ale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standar

33、ds AssociationPrepared byApproved byStandards Council of CanadaNational Standard of CanadaCAN/CSA-C22.2 No. 262-04Optical fiber cable and communication cable raceway systemsPublished in March 2004 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 1

34、00, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.csa.caISBN 1-55397-490-5Technical Editor: Brian Haydon Canadian Standards Association 2004All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permi

35、ssion of the publisher.Contents Canadian Standards AssociationOptical fiber cable and communication cable raceway systemsMarch 2004 iiiTechnical Committee on Wiring Products ivSubcommittee on C22.2 No. 211 and C22.2 No. 227 vPreface viiForeword viii1Scope 12 Reference publications 13 Definitions 24

36、General requirements 25 Construction 25.1 Raceway 25.2 Fittings and covers 26Markings 36.1 Raceway marking 36.2 Fittings marking 36.3 Package marking 36.4 Installation and assembly instruction sheets 37 Tests 47.1 General 47.2 Horizontal flame and smoke FT6 47.2.1 General 47.2.2 Test specimens 47.3

37、Vertical flame FT4 57.3.1 General 57.3.2 Apparatus, specimens, and procedure 57.3.3 Raceway fittings 57.4 125 mm flame FT1 57.5 Heat shock 57.6 Cold bend 5Tables1 Optical fiber cable and communication cable raceway test program 6Figures1 Probe for gaps and openings 6CAN/CSA-C22.2 No. 262-04 Canadian

38、 Standards Associationiv March 2004Technical Committee on Wiring ProductsR. Leduc Alberta Municipal Affairs,Edmonton, AlbertaRepresenting Regulatory AuthoritiesChair K.L. Rodel Hubbell Canada Inc.,Pickering, OntarioRepresenting ManufacturersVice-ChairB. Haydon CSA,Mississauga, OntarioProject Manager

39、Representing Regulatory AuthoritiesT. Olechna Electrical Safety Authority,Mississauga, OntarioS. Paulsen Province of New Brunswick,Fredericton, New BrunswickJ.-L. Robert Rgie du btiment du Qubec,Qubec, QubecA.Z. Tsisserev City of Vancouver,Vancouver, British ColumbiaRepresenting ManufacturersP. Desi

40、lets Leviton Manufacturing of Canada Limited,Pointe-Claire, QubecR.E. Edwards Edwards Tintagel Consulting,Halifax, Nova ScotiaD.S. Reith Nexans Canada Inc.,Markham, OntarioRepresenting General InterestsR.B. Chauhan National Research Council Canada,Ottawa, OntarioD.H. Dunsire Winnipeg, Manitoba Consu

41、mer RepresentativeV.G. Rowe MAREX Canada Limited,Winfield, British Columbia Canadian Standards Association Optical fiber cable and communication cable raceway systemsMarch 2004 vSubcommittee on C22.2 No. 211 and C22.2 No. 227P.J. Cook IPEX Inc.,Verdun, QubecChairB. Arsenault FRE Composites Inc.,Sain

42、t-Andr dArgenteuil, QubecJ. Austin Kopex International Ltd.,Slough, Berkshire, EnglandD. Coolidge Electri-Flex Company,Roselle, Illinois, USAG. Dauberger Thomas (b) provide an explanation of circumstances surrounding the actual field condition; and(c) be phrased where possible to permit a specific “

43、yes” or “no” answer.Committee interpretations are processed in accordance with the CSA Directives and guidelines governingstandardization and are published in CSAs periodical Info Update, which is available on the CSA Web site atwww.csa.ca.CAN/CSA-C22.2 No. 262-04 Canadian Standards Associationviii

44、March 2004ForewordThe Canadian Standards Association (CSA) develops standards under the name Canadian Standards Association, and provides certification and testing under the name CSA International. CSA International provides certification services for manufacturers who, under license from CSA, wish

45、to use the appropriate registered CSA Marks on certain products of their manufacture to indicate conformity with CSA Standards.CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as app

46、ropriate. Where applicable, certification may form the basis for acceptance by inspection authorities responsible for enforcement of regulations. Where feasible, programs will be developed for additional products for which certification is desired by producers, consumers, or other interests. In perf

47、orming its functions in accordance with its objectives, CSA does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of the Association represent its professional judgement given with due consideration to the necessary limitations

48、 of practical operation and state of the art at the time the Standard is processed.Products in substantial accord with this Standard but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the feature or difference is found acceptable utilizing appropriate

49、CSA International Operating Procedures. Products that comply with this Standard shall not be certified if they are found to have additional features which are inconsistent with the intent of this Standard. Products shall not be certifiable if they are discovered to contravene applicable laws or regulations.Testing techniques, test procedures, and instrumentation frequently must be prescribed by CSA International in addition to the technical requirements contained in Standards of CSA. In addition to markings specified in the Standard, CSA Interna