CAN CSA-C22 2 NO 60745-2-16-2009 Hand-held motor-operated electric tools - Safety - Part 2-16 Particular requirements for tackers (First Edition).pdf

1、Hand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackersCAN/CSA-C22.2 No.60745-2-16-09(IEC 60745-2-16:2008, MOD)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Association (CSA) standards a

2、re developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to

3、promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,

4、implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this

5、document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDI

6、RECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE),

7、 OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render pr

8、ofessional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no

9、 responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the c

10、ontents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright

11、, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification,

12、copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all in

13、tellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised

14、 that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is

15、 in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have s

16、uch copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this doc

17、ument.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptan

18、ce of the terms and conditions of this Legal Notice.CSA Standards Update ServiceCAN/CSA-C22.2 No.60745-2-16-09November 2009Title:Hand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackersPagination:20 pages (vi preliminary and 14 text)To register for e-mail notific

19、ation about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2420256.If you require assistance, please e-mail techsupportcsa.ca or call 416-74

20、7-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.TheCanadianStandardsAssociation(CSA),under whose auspices this National Standard hasbeen produced, was chartered in 1919 andaccredited by the Standards Council of Canadato the National

21、Standards system in 1973. It is anot-for-profit, nonstatutory, voluntary membershipassociation engaged in standards development andcertification activities.CSA standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, unions and professionalorganizati

22、ons, and governmental agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, provincial, andfederal governments in their regulations, particularlyin the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associa

23、tions acrossCanada indicate their support for CSAs standardsdevelopment by volunteering their time and skillsto CSA Committee work and supporting theAssociations objectives through sustainingmemberships. The more than 7000 committeevolunteers and the 2000 sustaining membershipstogether form CSAs tot

24、al membership from whichits Directors are chosen. Sustaining membershipsrepresent a major source of income for CSAsstandards development activities.The Association offers certification and testingservices in support of and as an extension to itsstandards development activities. To ensure theintegrit

25、y of its certification process, the Associationregularly and continually audits and inspects productsthat bear the CSA Mark.In addition to its head office and laboratorycomplex in Toronto, CSA has regional branch officesin major centres across Canada and inspection andtesting agencies in eight count

26、ries. Since 1919, theAssociation has developed the necessary expertise tomeet its corporate mission: CSA is an independentservice organization whose mission is to provide anopen and effective forum for activities facilitating theexchange of goods and services through the use ofstandards, certificati

27、on and related services to meetnational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaTheStandardsCouncilofCanada(SCC)is thecoordinating body of the National StandardsSystem, a coa

28、lition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehe

29、alth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited StandardsDevelopment O

30、rganization (SDO) and approvedby the SCC according to the requirements of CAN-P-2.Approval does not refer to the technical content of thestandard; this remains the continuing responsibility ofthe SDO. An NSC reflects a consensus of a number ofcapable individuals whose collective interests provide,to

31、 the greatest practicable extent, a balance ofrepresentation of general interests, producers,regulators, users (including consumers), and otherswith relevant interests, as may be appropriate to thesubject in hand. It normally is a standard which iscapable of making a significant and timely contribut

32、ionto the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO whichpublishes the standard.The responsibility for approving standards asNational Standa

33、rds of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.AlthoughtheintendedprimaryapplicationofthisStandardisstatedinitsScope,itisimportanttonotethatitremainstheresponsibilit

34、yoftheuserstojudgeitssuitabilityfortheirparticularpurpose.Registeredtrade-markofCanadianStandardsAssociationCanadian Standards AssociationCAN/CSA-C22.2 No. 60745-2-16-09First Edition(IEC 60745-2-16:2008, MOD)Underwriters Laboratories Inc.UL 60745-2-16First EditionANSI/UL 60745-2-16-2009Hand-held mot

35、or-operated electric tools Safety Part 2-16: Particular requirements for tackersNovember 18, 2009This national standard is based on publication IEC 60745-2-16, Second edition (2008).Commitment for AmendmentsThis Standard is issued jointly by the Canadian Standards Association (CSA) and Underwriters

36、Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of CSA and UL. CSA and UL will issue revisions to this st

37、andard by means of a new edition or revised or additional pages bearing their date of issue.ISBN 978-1-55491-232-2 2009Canadian Standards Association All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.To purchase CS

38、A Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee. To submit a proposal for change to CSA S

39、tandards, please send the following information to inquirescsa.ca and include “Proposal for change” in the subject line: Standard designation (number); relevant clause, table, and/or figure number; wording of the proposed change; and rationale for the change.Copyright 2009 Underwriters Laboratories

40、Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL.This ANSI/UL Standard fo

41、r Safety consists of the First Edition of ANSI/UL 60745-2-16 dated November 18, 2009.The most recent designation of ANSI/UL 60745-2-16 as an American National Standard (ANSI) occurred on November 18, 2009. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (f

42、ront and back), or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in UL

43、s On-Line Collaborative Standards Development System (CSDS) at http:/.To purchase UL Standards, visit COMM 2000 at http:/m-2000/help/how_to_order.aspx or call toll-free 1-888-853-3503.NOVEMBER 18, 2009 CAN/CSA-C22.2 No. 60745-2-16-09 UL 60745-2-16 iiiCONTENTSPreface ivCanadian/US National Difference

44、s. viIEC 60745-2-16, Hand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackers 1Foreword 21 Scope 42 Normative references 43 Terms and definitions 44 General requirements . 55 General conditions for the tests 56 Void . 57 Classification. 58 Marking and instruction

45、s . 59 Protection against access to live parts 610 Starting 611 Input and current . 712 Heating 713 Leakage current 714 Moisture resistance. 715 Electric strength 716 Overload protection of transformers and associated circuits 717 Endurance. 718 Abnormal operation. 819 Mechanical hazards 820 Mechani

46、cal strength.1021 Construction.1022 Internal wiring.1023 Components.1024 Supply connection and external flexible cords.1025 Terminals for external conductors 1026 Provision for earthing .1027 Screws and connections 1028 Creepage distances, clearances and distances through insulation .1029 Resistance

47、 to heat, fire and tracking1030 Resistance to rusting1131 Radiation, toxicity and similar hazards.11AnnexesAnnex K (normative) Battery tools and battery packs 12Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources 13Bibliography.14iv CAN/CSA-C22.

48、2 No. 60745-2-16-09 UL 60745-2-16 NOVEMBER 18, 2009PrefaceThis is the harmonized CSA and UL standard for Hand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackers. It is the first edition of CAN/CSA-C22.2 No. 60745-2-16 and the first edition of UL 60745-2-16. This

49、 standard is based on IEC 60745-2-16, second edition.This harmonized standard was prepared by the Canadian Standards Association (CSA) and Underwriters Laboratories Inc. (UL).This standard is considered suitable for use for conformity assessment within the stated scope of the standard.This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committe