CAN CSA-C22 2 NO 60950-22-2007 Information Technology Equipment Safety Part 22 Equipment to be Installed Outdoors (First Edition Update No 1 December 2011).pdf

1、CAN/CSA-C22.2 No. 60950-22-07(IEC 60950-22:2005, MOD)A National Standard of CanadaInformation Technology Equipment Safety Part 22: Equipment to beInstalled OutdoorsLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process

2、 approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independe

3、ntly test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fit

4、ness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding

5、 this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,

6、 HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING

7、 FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or

8、 entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all

9、 use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Inte

10、llectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary),

11、 and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that

12、protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAtten

13、tion is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights

14、is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for th

15、e sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, user

16、s may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Lega

17、l Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Update No. 1CAN/CSA-C22.2 No. 609

18、50-22-07December 2011Note: General Instructions for CSA Standards are now called Updates. Please contact CSA Information Products Sales or visit shop.csa.ca for information about the CSA Standards Update Service.Title: Information Technology Equipment Safety Part 22: Equipment to be Installed Outdoo

19、rs originally published April 2007The following revisions have been formally approved and are marked by a vertical line in the margin on the attached replacement pages:Revised Title page, copyright page, Clause 5, and Annex NAENew NoneDeleted None Update your copy by inserting these revised pages.Ke

20、ep the pages you remove for reference.Blank pageInformation Technology Equipment Safety Part 22:Equipment to be Installed OutdoorsApril 23, 2007(Title Page Reprinted: December 19, 2011)This national standard is based on publication IEC 60950-22, First Edition (2005).Canadian Standards AssociationCAN

21、/CSA-C22.2 No. 60950-22-07First Edition(IEC 60950-22: 2005, MOD)Underwriters Laboratories Inc.UL 60950-22First EditionANSI/UL 60950-22-2011Commitment for AmendmentsThis standard is issued jointly by the Canadian Standards Association (CSA) andUnderwriters Laboratories Inc. (UL). Comments or proposal

22、s for revisions on anypart of the standard may be submitted to CSA or UL at any time. Revisions to thisstandard will be made only after processing according to the standardsdevelopment procedures of CSA and UL. CSA and UL will issue revisions to thisstandard by means of a new edition or revised or a

23、dditional pages bearing theirdate of issue._CSA Standards are subject to periodic review, and suggestions for theirimprovement will be referred to the appropriate committee. To submit a proposalfor change to CSA Standards, please send the following information toinquirescsa.ca and include Proposal f

24、or change in the subject line: Standarddesignation (number); relevant clause, table, and/or figure number; wording of theproposed change; and rationale for the change.To purchase CSA Standards and related publications, visit CSAs Online Store atwww.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-

25、747-4044._ULs Standards for Safety are copyrighted by UL. Neither a printed nor electroniccopy of a Standard should be altered in any way. All of ULs Standards and allcopyrights, ownerships, and rights regarding those Standards shall remain thesole and exclusive property of UL.This ANSI/UL Standard

26、for Safety consists of the First Edition including revisionsthrough December 19, 2011. The most recent designation of ANSI/UL 60950-22as an American National Standard (ANSI) occurred on December 19, 2011. ANSIapproval for a standard does not include the Cover Page, Transmittal Pages, TitlePage (fron

27、t and back), or the Preface. The National Difference Page and IECForeword are also excluded from the ANSI approval of IEC-based standards.Comments or proposals for revisions on any part of the Standard may besubmitted to UL at any time. Proposals should be submitted via a ProposalRequest in ULs On-L

28、ine Collaborative Standards Development System (CSDS)at http:/.To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.ISBN 1-55436-413-2Copyright 2007Canadian Standards AssociationAll rights reserved. No part of thispublication may be reproduced in anyform whatsoever

29、without the priorpermission of the publisher.Copyright 2011Underwriters Laboratories Inc.4.3 Rise of earth potentialAttention is drawn to the fact that during fault clearing conditions, HAZARDOUS VOLTAGES may existand be accessible for longer periods than for indoor equipment and special earthing co

30、nditionsmay be necessary. These are typically specified in local installation codes.NOTE In the USA, these requirements are contained in the National Electrical Code. In Canada, they are contained in the CanadianElectrical Code.Compliance is checked by evaluation of the installation instructions.5 M

31、arking and instructionsThe installation instructions for OUTDOOR EQUIPMENT shall include details of any special featuresneeded for protection from conditions in the OUTDOOR LOCATION(see 1.7.2 of IEC 60950-1).If a manufacturer of an OUTDOOR ENCLOSURE classifies a product in accordance with IEC 60529,

32、 theIP code shall be declared, however it is not required to mark the IP code on the OUTDOORENCLOSURE. It is not required to make such a declaration for OUTDOOR EQUIPMENT.Additionally, OUTDOOR ENCLOSURES shall be classified and marked in accordance with UL 50 or UL50E, or CAN/CSA C22.2 No. 94 or CAN

33、/CSA C22.2 No. 94.2.Compliance is checked by inspection.6 Protection from electrical shock in an outdoor location6.1 Voltage limits of user-accessible parts in outdoor locationsUSER-accessible conductive parts in an OUTDOOR LOCATION shall meet the requirements for an SELVCIRCUIT in 2.2.2 and 2.2.3 o

34、f IEC 60950-1, except that the voltage limits shall not exceed: 15 V a.c., 21,2 V peak, or 30 V d.c. under normal operating conditions (see 2.2.2), 15 V a.c., 21,2 V peak, or 30 V d.c. for longer than 0,2 s under single faultconditions (see 2.2.3). Moreover, the voltage shall not exceed 30 V a.c., 4

35、2,4 V peakor 60 V d.c.The exception in 2.2.3 of IEC 60950-1 relating to 2.3.2.1 b) (2.3.2 in IEC 60950-1, first edition)of the same publication, does not apply to USER-accessible conductive parts.NOTE Lower voltage limits apply because the contact resistance of the body is reduced when subjected to

36、wet conditions.Compliance is checked by measurement.DECEMBER 19, 2011 CAN/CSA-C22.2 NO. 60950-22-07 UL 60950-22 15D1D1DENAE6.2 Limited current circuits in outdoor locationsThe requirements of 2.4 of IEC 60950-1, apply without change.7 Wiring terminals for connection of external conductorsThe mains s

37、upply terminations for OUTDOOR EQUIPMENT that is intended to be powered: via the normal building installation wiring, shall be as specified in 3.3 of IEC60950-1; directly from the mains distribution system, shall be as specified in IEC 60364.The applicable parts of the Canadian Electrical Code, Part

38、 I, CSA C22.1; Canadian ElectricalCode, Part III, CSA C22.3; the National Electrical Code, NFPA 70; and the National ElectricalSafety Code, ANSI/IEEE C2, shall apply as appropriate.NOTE For other terminals, IEC 60950-1 applies.Compliance is checked by inspection.8 Construction requirements for outdo

39、or enclosures8.1 GeneralProtection against corrosion shall be provided by the use of suitable materials or by theapplication of a protective coating applied to the exposed surface, taking into account theintended conditions of use.Parts, such as dials or connectors, that serve as a functional part o

40、f an OUTDOOR ENCLOSURE shallcomply with the same environmental protection requirements as for the OUTDOOR ENCLOSURE.NOTE 1 Aspects affecting safety which require the integrity of the OUTDOOR ENCLOSURE through the life of the product include: continued protection against impact; continued protection

41、against ingress of dust and water; continued provision of earth continuity.An OUTDOOR ENCLOSURE shall not be used to carry current during normal operation if this couldcause corrosion that would impair safety. This does not preclude connection of a conductive partof an OUTDOOR ENCLOSURE to protectiv

42、e earth for the purpose of carrying fault currents.NOTE 2 The action of a current flowing through a joint can increase corrosion under wet conditions.Where a conductive part of an OUTDOOR ENCLOSURE is connected to protective earth for the purposeof carrying fault currents, the resulting connection s

43、hall meet the requirements of 2.6 of IEC60950-1, after the appropriate weather conditioning tests, see 8.3.Compliance is checked by inspection and, if necessary, by the tests of 2.6 of IEC 60950-1 and8.3 of this standard.APRIL 23, 2007CAN/CSA-C22.2 NO. 60950-22-07 UL 60950-2216D1D1D1NAEAnnex F(infor

44、mative)BibliographyIEC 60364-1:2001, Electrical installations of buildings Part 1: Fundamental principles,assessment of general characteristics, definitionsIEC 60364-4-44, Electrical installations of buildings Part 4-44: Protection for safety Chapter44: Protection against voltage disturbances and el

45、ectromagnetic disturbancesIEC 60364-5-53, Electrical installations of buildings Part 5-53: Selection and erection ofelectrical equipment Isolation, switching and controlIEC 60439-5:1996, Low-voltage switchgear and controlgear assemblies Part 5: Particularrequirements for assemblies intended to be in

46、stalled outdoors in public places Cabledistribution cabinets (CDCs) for power distribution in networks1)Amendment 1 (1998)IEC 60664-1, Insulation coordination for equipment within low-voltage systems Part 1:Principles, requirements and testsIEC 60721-3-4, Classification of environmental conditions P

47、art 3: Classification of groups ofenvironmental parameters and their severities Section 4: Stationary use at non-weatherprotected locationsIEC 61024-1:1990, Protection of structures against lightning Part 1: General principlesIEC 61587-1:1999, Mechanical structures for electronic equipment Tests for

48、 IEC 60917 andIEC 60297 Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracksand chassisIEC 61969-3, Mechanical structures for electronic equipment Outdoor enclosures Part 3:Sectional specification Climatic, mechanical tests and safety aspects for cabinets and casesASTM

49、 D471-98: Standard Test Method for Rubber Property-Effect of Liquids1)A consolidated edition (1.1) exists, including IEC 60439-5:1996 and its Amendment 1 (1998).APRIL 23, 2007 CAN/CSA-C22.2 NO. 60950-22-07 UL 60950-22 35Annex NAE(informative)U.S. and Canadian regulatory requirementsThis annex provides examples of and references for regulatory