CAN CSA-C22 2 NO 745-2-30-1995 Safety of portable electric tools - Part 2 Particular requirements for staplers (First Edition).pdf

1、CAN/CSA-C22.2 No. 745-2-30-95A National Standard of Canada(reaffirmed 2014)Safety of portable electric tools Part 2: Particular requirements for staplersLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development pr

2、ocess approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does no

3、t independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this do

4、cuments fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations

5、or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJU

6、RY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY

7、, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other s

8、ervices for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility

9、 whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the cont

10、ents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by

11、copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modif

12、ication, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law

13、, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of th

14、is standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do

15、 only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ this remains the continuing responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals who

16、se collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of m

17、aking a significant and timely contribution to the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO which publishes the standard.The responsibility

18、 for approving standards as National Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its

19、 Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Canadian Standards Association CAN/CSA-C22.2 No. 745-2-30 First Edition Underwriters Labo

20、ratories Inc. UL 745-2-30 First Edition Approved by Standards Council of Canada Particular Requirements for Staplers March 23, 1995 Commitment for Amendments This Standard is issued jointly by Canadian Standards Association and Underwriters Laboratories Incorporated. Amendments to this Standard will

21、 be made only after processing according to the Standards writing procedures by both Canadian Standards Association and Underwriters Laboratories Incorporated. ISSN 0317-5669 ISBN 1-55989-776-7 Copyright 1995 Canadian Standards Copyright 1995 Underwriters Association Laboratories Incorporated Inc. A

22、ll rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publisher. March 23, 1995 CSA-C22.2 No. 745-2-30 LJL 745-2-30 3 Contents Preface 5 Foreword (CSA) 7 Foreword (UL) 9 1. Scope 11 2. Defini

23、tions 11 3. General requirement 11 4. General notes on tests 11 5. Rating 11 6. Classification 11 7. Marking 11 8. Protection against electric shock 11 9. Starting 11 10. Input and current 12 11. Heating 12 12. Leakage current 12 13. Radio and television interference suppression 12 14. Moisture resi

24、stance 12 15. Insulation resistance and electric strength 12 16. Endurance 12 17. Abnormal operation 12 18. Mechanical hazards 13 19. Mechanical strength 13 20. Construction 13 4 CSA-C22.2 No. 745-2-30 UL 745-2-30 March 23, 1995 21. internal wiring 13 22. Components 13 23. Supply connection and exte

25、rnal flexible cables and cords 13 24. Terminals for external conductors 13 25. Provision for earth ing 13 26. Screws and connections 13 21. Creepage distances, clearances and distances through insulation 13 28. Resistance to heat, fire and tracking 13 29. Resistance to rusting 13 30. Tests by Manufa

26、cturers 13 31. instructions 14 Appendix A Thermal cutouts and overload releases 15 Appendix B Electronic circuits 15 Appendix C Construction of safety isolating transformers 15 Appendix D Measurement of creepage distances and clearances 15 Annnnrtiv F Rnfarnnra ctandrd 15 Appendix F Attachments and

27、accessories 15 Appendix G Sequence of tests 15 Appendix H Translations 16 March 23, 1995 CSA-C22.2 No. 745-2-30 UL 745-2-30 5 Preface This is the common CSA and UL Standard for portable electric staplers. It is the first edition of CSA Standard CAN!CSA-C22.2 No. 745-2-30, Safety of portable electric

28、 tools Part 2: Particular requirements for staplers and UL 745-2-30, Safety of portable electric tools Part 2: Particular requirements for staplers. It is written in SI (metric) units, It will coexist with the GSA Standard CAN/CSA-C22.2 No. 71.1 for the period given in CSA Certification Notice Elect

29、rical Tools No. 6. This Standard was prepared by the Canadian Standards Association and Underwriters Laboratories Inc. It contains particular requirements and is intended to be used in conjunction with the general Standard CAN!CSA-C22.2 No. 745-1/UL 745-1. Where a clause of the general Standard (CAN

30、/CSA-C22.2 No. 745-1/UL 745-1) is not mentioned in this Standard, the clause applies as far as is reasonable. Where this particular Standard states addition, modification, or replacement, the relevant requirement, test specification, or explanatory matter in the general Standard (CAN/CSA-C22.2 No. 7

31、45-1/UL 745-1) should be adapted accordingly. If the functions of a tool are covered by different particular Standards, the relevant particular Standard is applied to each function separately, so far as is reasonable. If applicable, the influence of one function on the other is taken into account. T

32、his Standard was reviewed by the CSA Subcommittee on Portable Electric Tools of the Technical Committee on Consumer and Commercial Products under the jurisdiction of the Standards Steering Committee on the Canadian Electrical Code, Part II, and was formally approved by these Committees. This Standar

33、d was processed and reviewed in accordance with the method of development, revision, and implementation of UL Standards for safety. This Standard has been approved by the Standards Council of Canada as a National Standard of Canada and it will be submitted to the American National Standards Institut

34、e (ANSI) for publication as an American National Standard. March 23, 1995 UL Effective Date As of June 1, 2007, all products Listed or Recognized by UL must comply with the requirements in this Standard. Between June 1, 2002 and June 1, 2007, new product submittals to UL must be evaluated under all

35、requirements in this standard. Between March 23, 1995 and June 1, 2002, new product submittals to UL may be evaluated under all requirements in this Standard or, if requested in writing, evaluated under presently effective requirements only. The presently eftective requirements are contained in the

36、seventh edition of UL 45. CSA Effective Date The effective date for CSA will be announced through CSA Certification Notice Electrical Tools No. 6. Note: Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of th

37、e users of the Standard to judge its suitability for their particular purpose. 6 CSA-C22.2 No. 745-2-30 UL 745-2-30 March 23, 1995 March 23, 1995 CSA-C22.2 No. 745-2-30 IJL 745-2-30 7 Foreword (CSA) Certification organizations, as accredited by the Standards Council of Canada, have their own criteri

38、a procedures for certification services. The following paragraphs define CSA Certification policies. The Canadian Standards Association provides certification services for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on certain products of their manufac

39、ture to indicate conformity with CSA Standards. CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable, certification may form the basis for acceptance by

40、inspection authorities responsible for enforcement of regulations. Where feasible, programs will be developed for additional products for which certification is desired by producers, consumers or other interests. In performing its functions in accordance with its objectives, CSA does not assume or u

41、ndertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of the Association represent its professional judgement given with due consideration to the necessity limitations of practical operation and state of the art at the time the Standard is process

42、ed. Products in substantial accord with this Standard but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the feature or difference is found acceptable utilizing appropriate CSA Certification Division Operating Procedures. Products which comply with thi

43、s Standard shall not be certified if they are found to have additional features which are inconsistent with the intent of this Standard. Products shall not be certifiable if they are discovered to contravene applicable Federal laws or regulations. Testing techniques, test procedures and instrumentat

44、ion frequently must be prescribed by the CSA Certification Division in addition to the technical requirements contained in Standards of CSA. In addition to markings specified in the Standard the CSA Certification and Testing Division may require special cautions, markings and instructions that are n

45、ot specified by the Standard. Some tests required by CSA Standards may be inherently hazardous. The Association neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed, whether performed in whole or in part by the ma

46、nufacturer or the Association, and whether or not any equipment, facility or personnel for in connection with the test is furnished by the manufacturer or the Association. Manufacturers should note that, in the event of the failure of the GSA Certification and Testing Division to resolve an issue ar

47、ising from the interpretation of requirements, there is an appeal procedure: the complainant should submit the matter, in writing, to the Secretary of the Canadian Standards Association. If this Standard is to be used in obtaining GSA Certification please remember, when making application for certif

48、ication, to request all current Amendments, Bulletins, Notices and Technical Information Letters that may be applicable and for which there may be a nominal charge. For such information or for further information concerning details about CSA Certification please address your inquiry to the Applicati

49、ons and Records Section, Canadian Standards Association, 178 Rexdale Boulevard, Rexdale (roronto), Ontario M9W 1 R3. March 23, 1995 CSA-C22.2 No. 745-2-30 UL 745-2-30 9 Foreword (UL) A. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in th