CAN CSA-C61400-11-2007 Wind turbine generator systems – Part 11 Acoustic noise measurement techniques (First Edition).pdf

1、 INTERNATIONALSTANDARD IEC61400-11Edition 2.12006-11Wind turbine generator systems Part 11: Acoustic noise measurement techniques Reference number IEC 61400-11:2002+A1:2006(E) Edition 2:2002 consolidated with amendment 1:2006 National Standard of CanadaCAN/CSA-C61400-11:07(IEC 61400-11:2006)Internat

2、ional Standard IEC 61400-11:2007 (edition 2.1, 2006-11) has been adopted without modification(IDT) as CSA Standard CAN/CSA-C61400-11:07, which has been approved as a National Standard of Canadaby the Standards Council of Canada.ISBN 978-1-55436-661-3 October 2007National Standard of CanadaCAN/CSA-C6

3、1400-11:07(IEC 61400-11:2006)International Standard IEC 61400-11:2002+A1:2006 (edition 2.1, 2006-11) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-C61400-11:07, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 978-1-55436-661-3 Octo

4、ber 2007 International Electrotechnical Commission (IEC), 2006. All rights reserved. NOT FOR RESALE.(IEC 61400-11:2002+A1:2006)Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

5、 Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further in

6、formation on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below

7、) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (ww

8、w.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (http:/www.iec.ch/searchpub/cur_fut.htm) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued pu

9、blications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (http:/www.iec.ch/online_news/ justpub/jp_entry.htm) is also available by email. Please contact the Customer Service Centre (see below) for further information. Cus

10、tomer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 National Standard of CanadaCAN/CSA-C61400-11:07Wind turbine generator systems Part11: Ac

11、oustic noise measurement techniquesPrepared byInternational Electrotechnical CommissionRegistered trade-mark of Canadian Standards AssociationReviewed byApproved byStandards Council of CanadaPublished in October 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 S

12、pectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of

13、 Canada. This process brings together volunteers representing varied viewpoints and interests to achieve co nsensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the c

14、ontent of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, wi thout limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or us

15、e, its mer chantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with an

16、y applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIA TED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT

17、NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT , TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY , ARISING OUT OF OR RESUL TING FROM ACCESS TO OR POSSESSION

18、OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty

19、 owed by any person or entity to another person or entity . The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilit y whatsoever arising in any way from any and all use of or reliance on the i

20、nformation contained in this document. CSA is a private not-for-profit company that publishes voluntar y standards and related documents. CSA has no power , nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights a

21、nd ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner , or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as other wise noted to the contrary), and all inventions and

22、trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or othe

23、rs intellectual property and may give rise to a right in CSA and/or others to s eek legal redress for such use, modification, copying, or disclosure. T o the extent permitted by licence or by law , CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the

24、possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of t he validity of any such patent rights is entirely their ow

25、n responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of re

26、viewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have suc h copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may n

27、ot permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may n

28、ot load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately . Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.National Standard of CanadaCAN/CSA-C61400-11:07Wind

29、 turbine generator systems Part11: Acoustic noise measurement techniquesPrepared byInternational Electrotechnical CommissionRegistered trade-mark of Canadian Standards AssociationReviewed byApproved byStandards Council of CanadaPublished in October 2007 by Canadian Standards AssociationA not-for-pro

30、fit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caTheCanadianStandardsAssociation(CSA),underwhoseauspicesthisNationalStandardhasbeenproduced,wascharteredin1919andaccreditedbytheStandards

31、CouncilofCanadatotheNationalStandardssystemin1973.Itisanot-for-profit,nonstatutory,voluntarymembershipassociationengagedinstandardsdevelopmentandcertificationactivities.CSAstandardsreflectanationalconsensusofproducersandusersincludingmanufacturers,consumers,retailers,unionsandprofessionalorganizatio

32、ns,andgovernmentalagencies.Thestandardsareusedwidelybyindustryandcommerceandoftenadoptedbymunicipal,provincial,andfederalgovernmentsintheirregulations,particularlyinthefieldsofhealth,safety,buildingandconstruction,andtheenvironment.Individuals,companies,andassociationsacrossCanadaindicatetheirsuppor

33、tforCSAsstandardsdevelopmentbyvolunteeringtheirtimeandskillstoCSACommitteeworkandsupportingtheAssociationsobjectivesthroughsustainingmemberships.Themorethan7000committeevolunteersandthe2000sustainingmembershipstogetherformCSAstotalmembershipfromwhichitsDirectorsarechosen.Sustainingmembershipsreprese

34、ntamajorsourceofincomeforCSAsstandardsdevelopmentactivities.TheAssociationofferscertificationandtestingservicesinsupportofandasanextensiontoitsstandardsdevelopmentactivities.Toensuretheintegrityofitscertificationprocess,theAssociationregularlyandcontinuallyauditsandinspectsproductsthatbeartheCSAMark

35、.InadditiontoitsheadofficeandlaboratorycomplexinToronto,CSAhasregionalbranchofficesinmajorcentresacrossCanadaandinspectionandtestingagenciesineightcountries.Since1919,theAssociationhasdevelopedthenecessaryexpertisetomeetitscorporatemission:CSAisanindependentserviceorganizationwhosemissionistoprovide

36、anopenandeffectiveforumforactivitiesfacilitatingtheexchangeofgoodsandservicesthroughtheuseofstandards,certificationandrelatedservicestomeetnationalandinternationalneeds.ForfurtherinformationonCSAservices,writetoCanadianStandardsAssociation5060SpectrumWay,Suite100Mississauga,Ontario,L4W5N6CanadaTheSt

37、andardsCouncilofCanada(SCC)isthecoordinatingbodyoftheNationalStandardsSystem,acoalitionofindependent,autonomousorganizationsworkingtowardsthefurtherdevelopmentandimprovementofvoluntarystandardizationinthenationalinterest.TheprincipalobjectsoftheSCCaretofosterandpromotevoluntarystandardizationasamean

38、sofadvancingthenationaleconomy,benefitingthehealth,safety,andwelfareofthepublic,assistingandprotectingtheconsumer,facilitatingdomesticandinternationaltrade,andfurtheringinternationalcooperationinthefieldofstandards.ANationalStandardofCanada(NSC)isastandardpreparedorreviewedbyanaccreditedStandardsDev

39、elopmentOrganization(SDO)andapprovedbytheSCCaccordingtotherequirementsofCAN-P-2.Approvaldoesnotrefertothetechnicalcontentofthestandard;thisremainsthecontinuingresponsibilityoftheSDO.AnNSCreflectsaconsensusofanumberofcapableindividualswhosecollectiveinterestsprovide,tothegreatestpracticableextent,aba

40、lanceofrepresentationofgeneralinterests,producers,regulators,users(includingconsumers),andotherswithrelevantinterests,asmaybeappropriatetothesubjectinhand.Itnormallyisastandardwhichiscapableofmakingasignificantandtimelycontributiontothenationalinterest.Thosewhohaveaneedtoapplystandardsareencouragedt

41、ouseNSCs.Thesestandardsaresubjecttoperiodicreview.UsersofNSCsarecautionedtoobtainthelatesteditionfromtheSDOwhichpublishesthestandard.TheresponsibilityforapprovingstandardsasNationalStandardsofCanadarestswiththeStandardsCouncilofCanada270AlbertStreet,Suite200Ottawa,Ontario,K1P6N7CanadaAlthoughtheinte

42、ndedprimaryapplicationofthisStandardisstatedinitsScope,itisimportanttonotethatitremainstheresponsibilityoftheuserstojudgeitssuitabilityfortheirparticularpurpose.Registeredtrade-markofCanadianStandardsAssociationCettenormeestofferteenanglaisseulementpourlemoment.LaCSApublieralaversionenfranaisdsquell

43、eseraproduiteparlorganismerdacteur.National Standard of CanadaCAN/CSA-C61400-11:07Wind turbine generator systems Part11: Acoustic noise measurement techniquesPrepared byInternational Electrotechnical CommissionRegistered trade-mark of Canadian Standards AssociationReviewed byApproved byStandards Cou

44、ncil of CanadaPublished in October 2007 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-C61400-11:07Wind turbine generator systems

45、 Part 11:Acousticnoise measurement techniquesCSA/4 Canadian Standards Association October 2007CAN/CSA-C61400-11:07Wind turbine generator systems Part 11: Acousticnoise measurement techniquesCSA PrefaceThis is the first edition of CAN/CSA-C61400-11, Wind turbine generator systems Part 11: Acoustic no

46、ise measurement techniques, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 61400-11 (edition 2:2002 consolidated with amendment 1:2006). At the time of publication, IEC 61400-11:2002+A1:2006 is available from IEC in Englis

47、h only. CSA will publish the French version when it becomes available from IEC.This Standard replaces Clause 7 of CAN/CSA-F417-M91, Wind Energy Conversion Systems (WECS) Performance. The balance of CAN/CSA-F417-M91 is replaced by CAN/CSA-C61400-12-1:07, Wind turbines Part 12-1: Power performance mea

48、surements of electricity producing wind turbines.The Canadian Standards Association acknowledges that the development of this Standard was made possible, in part, by the financial support of Natural Resources Canada (NRCan).This Standard was reviewed for Canadian adoption by the CSA Subcommittee on

49、Acoustic Noise Measurement of Wind Turbines, under the jurisdiction of the CSA Technical Committee on Wind Turbines and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada.Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has provided the following direction for the interpretation of standards under its jurisdiction: “The