CAN CSA-C862-2012 Performance of incandescent reflector lamps (Fifth Edition Update No 1 July 2014).pdf

1、C862-12Performance of incandescent reflector lampsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing

2、 varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilit

3、yThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any th

4、ird partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN

5、NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL D

6、AMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP H

7、AS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to

8、 another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this

9、 document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs bet

10、ween CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade se

11、crets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others

12、 intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn

13、to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entir

14、ely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURP

15、OSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ equal access and effective participation by concerned interests; respect for diverse interests and identification of those who should be afforded access to provide the needed balance of interests; mechanism for dispute resol

16、ution; openness and transparency; open access by interested parties to the procedures guiding the standards development process; clarity with respect to the processes; and Canadian interest consideration as the initial basis for the development of standards. A National Standard of Canada (NSC) is a

17、standard prepared or reviewed by an SCC-accredited SDO and approved by the SCC according to NSC approval requirements. Approval does not refer to the technical content of the standard, as this remains the responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose

18、 collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers) and others with relevant interests, as may be appropriate to the subject at hand. NSCs are intended to make a significant and timely

19、 contribution to the Canadian interest. Those who have a need to apply standards are encouraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO that publishes the standard. The responsibility for approving standards a

20、s NSCs rests withStandards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary application of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particu

21、lar purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Cette Norme Nationale du Canada est disponible en versions franaise et anglaise.(National Standards of Canada text inserted July 2014)Approved byNational Standard of Canada(approved July 2014)Published in Octob

22、er 2012 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caCAN/CSA-C862-12Performance of incandescent reflector lampsPrepared byTMA trade-mark of the Canadian Standa

23、rds Association, operating as “CSA Group”Approved byICS 29.140.20; 03.120.01; 91.160.01ISBN 978-1-55491-970-3 2012 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.(Copyright page replaced July 2014)To pu

24、rchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. 2014 CSA Group Performance of incandescent reflector lampsJuly 2014ContentsTechnical Committee on Lighting ivSubcommittee on Performance of Incandescent Reflector Lamps

25、viiPreface viii1 Scope 12 Reference publications 23 Definitions 34 General requirements 45 Sampling 55.1 Principles of sampling 55.2 Selection of basic model test samples 56 Preparation for testing 56.1 Seasoning 56.2 Operating position 56.3 Handling 57 Performance requirements 67.1 Wattage 67.2 Ave

26、rage lamp efficacy 68 Photometry 68.1 Test voltage 68.2 Ambient conditions 68.3 Luminous flux 68.4 Beam candlepower distribution 79 Marking 7AnnexesA (informative) Common reflector lamp shapes 8Tables1 Minimum average lamp efficacy R, PAR, BPAR, BR, and ER lamps 6iii(Replaces p. iii, October 2012)C8

27、62-12 2014 CSA GroupJuly 2014Technical Committee on LightingR.F. Hughes Hughes Engineering,North Vancouver, British ColumbiaCategory: General InterestChairA. Silbiger Andrew Silbiger Management Inc.,Thornhill, OntarioCategory: General InterestVice-ChairG. Ash Richard SaskPower,Regina, SaskatchewanCa

28、tegory: User Interest/Regulatory AuthorityM.J. Barry MJB Technologies,Caledon, OntarioAssociate B. Bryans Electro-Federation Canada,Toronto, OntarioAssociateD. Carr Ontario Power Authority,Toronto, OntarioAssociateM. Cole Hubbell Canada LP,Pickering, OntarioCategory: Producer InterestK. Delves Natur

29、al Resources Canada,Ottawa, OntarioAssociateK. Elsey Canadian Energy Efficiency Alliance,Mississauga, OntarioCategory: General InterestM. Gamble SOLA Canada Lighting (b) provide an explanation of circumstances surrounding the actual field condition; and(c) where possible, phrase the request in such

30、a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.(5) This Standard is subje

31、ct to review five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject line:(a) Standard desi

32、gnation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change.(Replaces p. viii, October 2012)viiiStandards Update ServiceC862-12October 2012Title: Performance of incandescent reflector lampsPagination: 16 pages (viii preliminar

33、y and 8 text), each dated October 2012To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2421930.If you require assistance, please e-mail techsupportcsagrou

34、p.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”Published in October 2012 by CSA GroupA not-for-profit private sector organization506

35、0 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at shop.csa.caC862-12Performance of incandescent reflector lamps100%ISBN 978-1-55491-970-3 2012 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form wha

36、tsoever without the prior permission of the publisher.To purchase standards and related publications, visit our Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044.CSA Group prints its publications on Rolland Enviro100, which contains 100% recycled post-consumer fibre, is Ec

37、oLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.October 2012 iiiContents 2012 CSA Group Performance of incandescent reflector lampsTechnical Committee on Lighting ivSubcommittee on Performance of Incandescent Reflector Lamps viiPreface viii1Scope 12 Reference pu

38、blications 23 Definitions 34 General requirements 45Sampling 55.1 Principles of sampling 55.2 Selection of basic model test samples 56 Preparation for testing 56.1 Seasoning 56.2 Operating position 56.3 Handling 57 Performance requirements 67.1 Wattage 67.2 Average lamp efficacy 68 Photometry 68.1 T

39、est voltage 68.2 Ambient conditions 68.3 Luminous flux 68.4 Beam candlepower distribution 79Marking 7AnnexesA (informative) Common reflector lamp shapes 8Tables1 Minimum average lamp efficacy R, PAR, BPAR, BR, and ER lamps 6C862-12 2012 CSA Groupiv October 2012Technical Committee on LightingR.F. Hug

40、hes BC Hydro,Burnaby, British ColumbiaChairA. Silbiger Andrew Silbiger Management Inc.,Thornhill, OntarioVice-ChairG. Ash Richard SaskPower,Regina, SaskatchewanM.J. Barry MJB Technologies,Caledon, OntarioAssociate B. Bryans Electro-Federation Canada,Mississauga, OntarioAssociateD. Carr Ontario Power

41、 Authority,Toronto, OntarioAssociateC. Cheng Ontario Ministry of Energy,Toronto, OntarioAssociateC. Coimbra Hydro One Networks Inc.,Toronto, OntarioAssociateM. Cole Hubbell Canada LP,Pickering, OntarioK. Delves Natural Resources Canada,Ottawa, OntarioAssociateK. Elsey Canadian Energy Efficiency Alli

42、ance,Mississauga, OntarioM. Gamble SOLA Canada Lighting (b) provide an explanation of circumstances surrounding the actual field condition; and(c) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in a

43、ccordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.(5) This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To s

44、ubmit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change. 20

45、12 CSA Group Performance of incandescent reflector lampsOctober 2012 1C862-12Performance of incandescent reflector lamps1Scope1.1This Standard describes testing procedures and states performance requirements for general service incandescent and tungsten halogen reflector lamps.1.2This Standard inclu

46、des performance requirements for(a) wattage;(b) lamp efficacy;(c) rated luminous flux;(d) centre beam intensity; and(e) rated life.1.3This Standard applies to incandescent and tungsten halogen reflector lamps designed for general lighting use that have(a) a rated wattage from 40 W up to and includin

47、g 205 W;(b) an operating capability between 110 and 130 V;(c) an E26/24 single contact, or E26/5039 skirted, medium screw base; and(d) a bulb diameter greater than 57 mm.1.4This Standard does not apply to any of the following:(a)coloured lamps;(b) lamps that(i) are of rough (or vibration) service ty

48、pe and are specifically marked and marketed as rough (or vibration) service lamps;(ii) have a coating or other containment system to retain glass fragments if the lamp is shattered and are specifically marked and marketed as impact-resistant lamps; or(iii) contain a filter that suppresses yellow and

49、 green portions of the spectrum and are specifically marked and marketed for plant growth use;(c) infrared heat lamps;(d) lamps used in mines or in airfield, aircraft, automotive, marine, aquarium, terrarium, or vivarium applications;(e) a bulb shape designated as BR as described in NEMA/ANSI C79.1 with(i) a diameter of 95.25 mm (BR 30) and a rated power of